Page is loading ...
16/11/2023 Loop Instructions - Mediascreen
Loop Instructions – Mediascreen
These instructions are to set the Mediascreen to play content in a constant loop, including on
startup.
1. Import your video via USB
- This process is typically not automatic, you must do the following steps;
- Press the ‘Source’ Button on the remote
- Navigate to File Manager
- Open the USB directory
- With your file highlighted, long-press the ‘OK’ button on your remote to select just the one
file. Do this for each file you need.
- Select the ‘Copy’ option near the bottom of the screen.
- Navigate back to the Local Storage directory and select ‘Paste’ via an option near the
bottom of the screen).
- Exit and navigate back to Media Player via pressing ‘Source’.
2. Put your content into a playlist.
- You can do this through the following steps;
- Press the ‘Source’ Button on the remote
- Navigate to Media Player
- Create a playlist
- Add your desired files (Select your files, press ‘Open near the bottom of the screen)
- Return out of the playlist view
- With the playlist highlighted, (bottom of the menu), press the play button on the
remote.
3. Ensure it’s set to looping
- Press the ‘Source’ Button on the remote
- Navigate to Media Player
- Ensure Play Mode is set to ‘Cycle’ (and not ‘Sequence’, ‘Random’ or ‘None’).
- With the playlist highlighted, press the Play button on your remote.
- To quickly test if it loops, press the fast forward button to skip through the video.
4. Set it to play on startup
- With the playlist playing on loop, do the following;
- Press the ‘Home’ button on the remote
- Go to the ‘CONFIGURATION 1’ menu
- Switch on state – set this to ‘Last Status’
- Boot on source – Press okay to view the submenu and set ‘Last Input’ to ‘On’*
- (*Alternatively, set ‘Last Input’ to ‘Off’ and set it to play your playlist).
5. Turn it off and on again to test it.
/
