Multimo A 520 ROYAL QUEEN DEEP BED Assembly Instructions

Brand
Multimo
Model
A 520 ROYAL QUEEN DEEP BED
Type
Assembly Instructions
Assembly Instructions
75 min.
135min.
Technical Service
End User
A 520 ROYAL QUEEN DEEP BED
+-
VIDEO
link
Page 1 Page 2
Accessories List
A-R
A-L
C
TAP - 02
4 / piece
MNG - 01
38 / piece
CT - 01 ( 6x40 ) mm
2 / piece
AL - 01 (4MM)
1 / piece
AL - 02 (5MM)
1 / piece
DSE - 01 (40x90x32) mm
3 / piece
DD - 01 ( R10 )
3 / piece
PL - 02 (8x22x1) mm
3 / piece
VDA - 01 ( 6,5x50 ) mm
4 / piece
VTB - 01 (4,8x16) mm
12 / piece
KP - 01 ( 224 ) mm
2 / piece
VKP - 01 (22) mm
4 / piece
MNX 02
38 / piece
KVL 01
26 / piece
TTC 01
4 / piece
OT-054
2 / piece
VD - 02 (3,5x25) mm
24 / piece
SG - 01
2 / piece
TAP - 01
30/ piece
AVT - 01
6 / piece2 / piece
OT-056D
TFC - 01(8x70) mm
3 / piece
SC - 92
2 / piece
VTB - 02 (4,2x16) mm
8 / piece 1 / piece
KMT-01
Pie c e T h ick n e s s L e n g t h W id th Pie c e T h i c k H e i g h t M o s t
A2 1 , 18 8 9, 76 2 2, 05 2 30 2280 560
B1 0 , 71 6 2 , 60 2 1, 2 6 1 18 1590 540
C1 1 , 18 6 2 , 60 2 1, 2 2 1 30 1590 539
D1 0 , 71 6 2 , 60 1 1, 8 1 1 18 1590 300
E3 0 , 31 8 9 , 25 2 1, 0 2 3 8 2267 534
F1 0 , 71 6 2 , 60 5 , 67 1 18 1590 144
G1 0 , 71 8 1 , 89 6 1, 5 7 1 18 2080 1564
H1 1 , 18 6 1 , 73 4 , 33 1 30 1568 110
K1 1 , 97 6 2 , 40 2 1, 2 6 1 50 1585 540
L2 0 , 71 6 2 , 60 3 , 15 2 18 1590 80
T ra c k T it le
(inc h )
(m m )
E
E
E
B
H
F
D
L
L
K
G
IM - 01 (6x30) mm
6 / piece
H 01
2 / piece
MKZ - 03
1 / piece
RL
KKS - 01
2 / piece
Page 1 Page 2
Accessories List
A-R
A-L
C
TAP - 02
4 / piece
MNG - 01
38 / piece
CT - 01 ( 6x40 ) mm
2 / piece
AL - 01 (4MM)
1 / piece
AL - 02 (5MM)
1 / piece
DSE - 01 (40x90x32) mm
3 / piece
DD - 01 ( R10 )
3 / piece
PL - 02 (8x22x1) mm
3 / piece
VDA - 01 ( 6,5x50 ) mm
4 / piece
VTB - 01 (4,8x16) mm
12 / piece
KP - 01 ( 224 ) mm
2 / piece
VKP - 01 (22) mm
4 / piece
MNX 02
38 / piece
KVL 01
26 / piece
TTC 01
4 / piece
OT-054
2 / piece
VD - 02 (3,5x25) mm
24 / piece
SG - 01
2 / piece
TAP - 01
30/ piece
AVT - 01
6 / piece2 / piece
OT-056D
TFC - 01(8x70) mm
3 / piece
SC - 92
2 / piece
VTB - 02 (4,2x16) mm
8 / piece 1 / piece
KMT-01
Pie c e T h ic k n e s s L e n g t h W id t h Pie c e T h i c k H e i g h t M o s t
A2 1 , 18 8 9 , 76 2 2, 0 5 2 30 2280 560
B1 0 , 71 6 2 , 60 2 1, 2 6 1 18 1590 540
C1 1 , 18 6 2 , 60 2 1, 2 2 1 30 1590 539
D1 0 , 71 6 2 , 60 1 1, 8 1 1 18 1590 300
E3 0 , 31 8 9 , 25 2 1, 0 2 3 8 2267 534
F1 0 , 71 6 2 , 60 5 , 67 1 18 1590 144
G1 0 , 71 8 1 , 89 6 1, 5 7 1 18 2080 1564
H1 1 , 18 6 1 , 73 4 , 33 1 30 1568 110
K1 1 , 97 6 2 , 40 2 1, 2 6 1 50 1585 540
L2 0 , 71 6 2 , 60 3 , 15 2 18 1590 80
T ra c k T it le
(inc h )
(m m )
E
E
E
B
H
F
D
L
L
K
G
IM - 01 (6x30) mm
6 / piece
H 01
2 / piece
MKZ - 03
1 / piece
RL
KKS - 01
2 / piece
Page 3 Page 4
STEP 1
MNX - 02
KVL 01
VIDEO
link
VIDEO
link
A (R/L)
B
D
F
L X 2
KVL - 01 x 2
MNX - 02 x 4
KVL - 01 x 2
KVL - 01 x 8
MNX - 02 x 12
KVL - 01 x 8
MNX - 02 x 8
KVL - 01 x 4
C
STEP 2
MNG - 01
STEP 3
MNG - 01
210°
B
F
D
MNG - 01 x 8
210°
MNG - 01 x 8
B A-R
C
Page 3 Page 4
STEP 1
MNX - 02
KVL 01
VIDEO
link
VIDEO
link
A (R/L)
B
D
F
L X 2
KVL - 01 x 2
MNX - 02 x 4
KVL - 01 x 2
KVL - 01 x 8
MNX - 02 x 12
KVL - 01 x 8
MNX - 02 x 8
KVL - 01 x 4
C
STEP 2
MNG - 01
STEP 3
MNG - 01
210°
B
F
D
MNG - 01 x 8
210°
MNG - 01 x 8
B A-R
C
Page 5 Page 6
STEP 4 STEP 5
VIDEO
link
VIDEO
link
E
E
E
H 01
MNG - 01
STEP 6
MNG - 01
A-L
210°
MNG - 01 x 12
210°
MNG - 01 x 4
L
L
Page 5 Page 6
STEP 4 STEP 5
VIDEO
link
VIDEO
link
E
E
E
H 01
MNG - 01
STEP 6
MNG - 01
A-L
210°
MNG - 01 x 12
210°
MNG - 01 x 4
L
L
Page 7 Page 8
STEP 7 STEP 9
VIDEO
link
VIDEO
link
MNG - 01
VD - 02 X 9
25 cm
VD - 02 X 9
VD - 02 X 6
AVT - 01X 6
STEP 8
K
K
L
L
MNX - 02 x 6
210°
MNG - 01 x 6
76 cm
126 cm
Ø 10 mm / 0,254 inch
DD - 01
TFC - 01
DSE - 01
VTB - 01
PL - 02
ATTENTION!!!
Must be secured to the wall made of brick, concrete or similarly strong material.
Mounting to wooden or metal studs is also acceptable.
Do not mount directly to sheetrock or paper-mache type walls not supported by studs.
TAP - 01
Page 7 Page 8
STEP 7 STEP 9
VIDEO
link
VIDEO
link
MNG - 01
VD - 02 X 9
25 cm
VD - 02 X 9
VD - 02 X 6
AVT - 01X 6
STEP 8
K
K
L
L
MNX - 02 x 6
210°
MNG - 01 x 6
76 cm
126 cm
Ø 10 mm / 0,254 inch
DD - 01
TFC - 01
DSE - 01
VTB - 01
PL - 02
ATTENTION!!!
Must be secured to the wall made of brick, concrete or similarly strong material.
Mounting to wooden or metal studs is also acceptable.
Do not mount directly to sheetrock or paper-mache type walls not supported by studs.
TAP - 01
Page 9 Page 10
STEP 10
VIDEO
link
STEP 9-1
WALLS MADE OF DRYWALL WITH WOODEN OR METAL STUDS
FİRST LOCATE THE STUDS BY USİNG ''STUD
FİNDER'' İN THE WALL AND DRİLL İT
ACCORDİNG TO THE HEİGHT MEASURMENTS
GİVEN ON THE SİDE.
UPPER HOLES SHOULD BE DRİLLED
FOR ATTACHİNG BED AT NEXT STEP.
SUPPLY DRYWALL FASTENERS APPROPPRIATE
TO YOUR WALL TYPE. WE RECOMMEND
USING STEEL TOGGLE BOLT ANCHOR THAT
SHOWN BELOW
NOT INCLUDED
Ø 10 mm / 0,254 inc
Ø 10 mm / 0,254 inch
DD - 01
TFC - 01
DSE - 01
VTB - 01
PL - 02
TAP - 01
STEP 11
IM - 01 x 2
AL - 02
CAUTION
DO NOT UNLOCK BEFORE INSTALL
MKZ - 03 (R/L)
IM - 01 x 1
AL - 02
A-R
Page 9 Page 10
STEP 10
VIDEO
link
STEP 9-1
WALLS MADE OF DRYWALL WITH WOODEN OR METAL STUDS
FİRST LOCATE THE STUDS BY USİNG ''STUD
FİNDER'' İN THE WALL AND DRİLL İT
ACCORDİNG TO THE HEİGHT MEASURMENTS
GİVEN ON THE SİDE.
UPPER HOLES SHOULD BE DRİLLED
FOR ATTACHİNG BED AT NEXT STEP.
SUPPLY DRYWALL FASTENERS APPROPPRIATE
TO YOUR WALL TYPE. WE RECOMMEND
USING STEEL TOGGLE BOLT ANCHOR THAT
SHOWN BELOW
NOT INCLUDED
Ø 10 mm / 0,254 inc
Ø 10 mm / 0,254 inch
DD - 01
TFC - 01
DSE - 01
VTB - 01
PL - 02
TAP - 01
STEP 11
IM - 01 x 2
AL - 02
CAUTION
DO NOT UNLOCK BEFORE INSTALL
MKZ - 03 (R/L)
IM - 01 x 1
AL - 02
A-R
Page 11 Page 12
VIDEO
link
45-50
LET THE STOPPER LOCK MOVE DOWN !!!
VIDEO
link
STEP 12 STEP 13
SG - 01
STEP 14
OT-056D
SC - 92
OT - 054
CT - 01
AL - 01
Page 11 Page 12
VIDEO
link
45-50
LET THE STOPPER LOCK MOVE DOWN !!!
VIDEO
link
STEP 12 STEP 13
SG - 01
STEP 14
OT-056D
SC - 92
OT - 054
CT - 01
AL - 01
Page 13 Page 14
STEP 15 STEP 16
VIDEO
link
VIDEO
link
TTC 01 X 2
TTC 01 X 2
H
H
TAP - 02
H
VDA - 01
KKS - 01 X 2
VDA - 01
AL - 01
Page 13 Page 14
STEP 15 STEP 16
VIDEO
link
VIDEO
link
TTC 01 X 2
TTC 01 X 2
H
H
TAP - 02
H
VDA - 01
KKS - 01 X 2
VDA - 01
AL - 01
Page 15 Page 16
STEP 17 STEP 18
VIDEO
link
VIDEO
link
VTB - 02 X 4
KMT - 01
Page 15 Page 16
STEP 17 STEP 18
VIDEO
link
VIDEO
link
KP - 01
VKP - 01 X 2
VTB - 02 X 4
KMT - 01
Page 17 Page 18
ATTENTION / HOW TO / READ ME / OWNER'S GUIDE
1. Wall beds must be securely attached to the wall. Hardware for mounting to
concrete, brick or similar strong material is included.
2. When mounting to drywall, wall beds must be attached to wooden or metal
studs in 2 or 3 points. Do not mount wall beds directly to drywall or paper-
mache type wall without properly attaching it to studs. Please choose
appropriate fasteners for the type of wall the bed will be mounted on.
Drywall mounting hardware is not included.
3. For safety and product longevity you must periodically inspect the integrity
and tightness of the mounting and mechanical connections. Confirm
hardware remains properly affixed and connections are snug.
4. Do not lean or rest heavy objects on sides or top of furniture. This may cause
balance issues and compromise the integrity of your mounting connections.
5. Please use wall beds and integrated shelves, desks and sofas as intended.
Do not jump and/or exceed supported weight limits. Do not sit or lean on
integrated shelves and desks. Improper use may cause personal injury and
damage to property.
6. With seasonal humidity change please inspect the interior and exterior of the
furniture for deformation and/or discoloration.
7. Before any un-mounting or disassembly please contact Multimo Beds for
technical support and instructions. Failure to properly detach may result in
personal injury and damage to property.
Page 17 Page 18
ATTENTION / HOW TO / READ ME / OWNER'S GUIDE
1. Wall beds must be securely attached to the wall. Hardware for mounting to
concrete, brick or similar strong material is included.
2. When mounting to drywall, wall beds must be attached to wooden or metal
studs in 2 or 3 points. Do not mount wall beds directly to drywall or paper-
mache type wall without properly attaching it to studs. Please choose
appropriate fasteners for the type of wall the bed will be mounted on.
Drywall mounting hardware is not included.
3. For safety and product longevity you must periodically inspect the integrity
and tightness of the mounting and mechanical connections. Confirm
hardware remains properly affixed and connections are snug.
4. Do not lean or rest heavy objects on sides or top of furniture. This may cause
balance issues and compromise the integrity of your mounting connections.
5. Please use wall beds and integrated shelves, desks and sofas as intended.
Do not jump and/or exceed supported weight limits. Do not sit or lean on
integrated shelves and desks. Improper use may cause personal injury and
damage to property.
6. With seasonal humidity change please inspect the interior and exterior of the
furniture for deformation and/or discoloration.
7. Before any un-mounting or disassembly please contact Multimo Beds for
technical support and instructions. Failure to properly detach may result in
personal injury and damage to property.
www.multmobeds.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20

Multimo A 520 ROYAL QUEEN DEEP BED Assembly Instructions

Brand
Multimo
Model
A 520 ROYAL QUEEN DEEP BED
Type
Assembly Instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents