CONSET 501-19-8S095 User manual

Brand
CONSET
Model
501-19-8S095
Type
User manual

This manual is also suitable for

1
ELECTRIC HEIGHT ADJUSTABLE TABLE
ConSet® - TYPE 501-19
DIRECTIONS FOR USE / ASSEMBLING
IMPORTANT NOTES!
Prior to installment, use and maintenance of the table frame, any installer and any user of the table must study
this assembly and operation manual carefully, so as to gain a complete understanding of its contents.
EN
WARNING
WARNING: FAILURE TO COMPLY WITH OR OBSERVE ALL
ASSEMBLY, SAFETY AND OPERATION INSTRUCTIONS
AND WARNINGS REGARDING THE USE OF THIS
PRODUCT MAY RESULT IN SERIOUS BODILY INJURY.
No. 312
75
0
.
7
2
TABLE OF CONTENT
1. SAFETY AND WARNINGS
2. USAGE
3. SET UP AND INSTALLATION
4. OPERATION
5. MAINTENANCE AND DEFECTS
6. TECHNICAL DATA
7. PARTS
8. ASSEMBLY DIRECTIONS
9. DECLARATION OF CONFORMITY
1. SAFETY AND WARNINGS
2. USAGE
The electromotive, height-adjustable tables are designed for workstations in dry work environments only.
The table height is infinitely adjustable, so that it can be set to the most ergonomically suitable working
level.
They have not been designed for other purposes than those included in this manual, e.g. they are not to
be used in areas of high humidity or dampness, nor for lifting people.
Any other use is at one’s own risk!
Do not crawl, lie or move around under the table frame, and do not sit or stand on the table
frame.
CHILDREN should only use the table when supervised by adults.
Liability: The manufacturer accepts under no circumstances warranty claims or liability claims for
damages arising from improper use or handling of the table frame other than that described in this
operation manual.
3. SET UP AND INSTALLATION
When the table has been assembled (see assembly instructions chapter 8) the adjustable feet are installed
so that the table is level and does not shift. Then the table is connected to the 110-230 VAC outlet and the
table is ready for use.
Make sure that no cables can get jammed.
Place the table in a safe distance from window frames, radiators, furniture etc. so that people do not get
stuck.
Do not place any objects above 55 cm underneath the table.
When moving the table after it has been assembled, the tabletop needs to be removed. The table
CANNOT be lifted by the tabletop.
4. OPERATION
This table complies with the prescribed safety regulations. Inappropriate use may cause damage to
persons and table.
Please read the operation manual prior to start using the table. It provides you with important
information about safety, use, installation and maintenance of the table, and thus protecting you
and your children and avoiding damage on the table.
Please guard this operation manual and pass it on to any future owner!
UP/DOWN operation:
Push button and UP or DOWN
button must be pressed
SIMULTANEOUSLY.
Push button
3
5. MAINTENANCE AND DEFECTS
The table does not require any maintenance by usage as described in chapter 2 in the directions for use.
The table is only to be maintained with a wrung cloth.
In the event of the occurrence of jarring sounds during operation, STOP using the table and please
contact the dealer.
6. TECHNICAL DATA
Frame, materials and weights: Steel, silver - Weight metal frame ~ 30 kg
W
D
60-160 cm
50-100 cm
H
V (speed)
68 – 120 cm
~28 mm/sek.
F
MAX
= Max. Load on tabletop:
120 kg
Operation: Rocker switches
Voltage:
Stanby consumption:
220-230 VAC / 50Hz or 110-100 VAC / 60Hz
< 0,15 Watt
7. PARTS (containing 2a, 2b or 2c and 3a or 3b, assembly is similar on all)
F
MAX
W
D
H
a) x 12
c) x 16
e) x 2
1
2a
4
5
d) x 1
g) x 4
2b
2c
3b
3a
4
3
5
8. ASSEMBLY DIRECTIONS
2
1
1
a) x 6
e) x 2
d) x 1
continued….
2a
2b
2c
3a
3b
a) x 6
5
4
5
4
c) x 16
f) x 2
g) x 4
The table is now assembled. Follow the directions for use in
CHAPTER 2.
UP/DOWN operation:
Push button and UP or DOWN
button must be pressed
SIMULTANEOUSLY.
Assembly directions continued…..
6
9. DECLARATION OF CONFORMITY
We hereby declare, under our sole responsibility that the following products:
- ConSet sit and stand table product type 501-19
is in accordance with:
- Directive 2006/42/EF of The European Parliament and of the Council of 17 May 2006 on machinery and
on changes of directive 95/16/EF
With reference to the above please be aware that:
- the sit and stand table is considered a machine and
- the sit and stand table may not be used until it has been assembled and installed according to the
instructions.
Manufacturer:
ConSet A/S
Industrivej 23
DK-6900 Skjern
Denmark
Tel: +45 9680 0080, Fax: +45 9680 0081
www.conset.com
conset@conset.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

CONSET 501-19-8S095 User manual

Brand
CONSET
Model
501-19-8S095
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents