Vivitek Qumi Q6 User manual

ii

Preface

Copyright

are the properties of their respective owners. Values, weights and dimensions are

approximate. Specications are subject to change without prior notice.

Disclaimer

The information in this document is subject to change without notice. The manufacturer

makes no representations or warranties with respect to the contents hereof and

specically disclaims any implied warranties of merchantability or tness for any particular

purpose. The manufacturer reserves the right to revise this publication and to make

changes from time to time in the content hereof without obligation of the manufacturer to

notify any person of such revision or changes.

Trademark Recognition

HDMI, the HDMI Logo, and High-Denition Multimedia Interface are

trademarks or registered trademarks of HDMI Licensing LLC in the

United States and other countries.

MHL, the MHL logo, and Mobile High-Denition Link are trademarks

or registered trademarks of MHL licensing, LLC.

All other product names used in this manual are the properties of their respective owners

and are acknowledged.

iii

Important Safety Information

Important:

It is strongly recommended that you read this section carefully before using the Qumi.

These safety and usage instructions that will make sure you enjoy many years of safe use

of the Qumi. Keep this manual for future reference.

Symbols Used

Warning symbols are used on the unit and in this manual to alert you of hazardous

situations.

The following styles are used in this manual to alert you to important information.

Note:

Provides additional information on the topic at hand.

Important:

Provides additional information that should not be overlooked.

Caution:

Alerts you to situations that may damage the unit.

Warning:

Alerts you to situations that may damage the unit, create a hazardous environment, or

cause personal injury.

Throughout this manual, component parts and items in the OSD (On-Screen Display)

menus are denoted in bold font as in this example:

“Press the Menu button on the remote control to open the Main menu.”

General Safety Information

• Do not open the unit case. There are no user-serviceable parts in the unit. For

servicing, contact qualied service personnel.

• Follow all warnings and cautions in this manual and on the unit case.

• The projection light source is extremely bright by design. To avoid damage to eyes,

do not look into the lens when the LED illumination is on.

• Do not place the unit on an unstable surface or stand.

• Avoid using the system near water, in direct sunlight, or near a heating device.

• Do not place heavy objects such as books or bags on the unit.

iv

Qumi Installation Notice

• Allow at least a 50cm clearance around the exhaust vent.

Minimum 100mm

Minimum 500mm

• Make sure that the intake vents do not recycle hot air from the exhaust vent.

• When operating the Qumi in an enclosed space, make sure that the surrounding air

temperature within the enclosure does not exceed operating temperature while the

Qumi is running, and the air intake and exhaust vents are unobstructed.

• All enclosures should pass a certied thermal evaluation to make sure that the Qumi

does not recycle exhaust air, as this may cause the device to shutdown even if the

enclosure temperature is with the acceptable operating temperature range.

Caution:

Avoid using the Qumi in dusty environments.

v

Power Safety

• Only use the supplied adapter.

• Do not place anything on the cord. Place the cord where it will not be in the way of

foot trafc.

• Remove the battery from the remote control when storing or not in use for a

prolonged period.

Cleaning the Qumi

• Unplug the cord before cleaning. See Cleaning the Qumi on page 62.

Note:

The Qumi will be warm after usage. Allow Qumi to cool down before storing in a

compartment.

Regulatory Warnings

Before installing and using the Qumi, read the regulatory notices in the Regulatory

Compliance on page 71.

Symbol Explanations

DISPOSAL: Do not use household or municipal waste collection services for

disposal of electrical and electronic equipment. EU countries require the use

of separate recycling collection services.

Main Features

• Lightweight unit, easy to pack away and transport.

• A high brightness rating allows for presentations in daylight or in lit rooms.

• Supports data resolution up to UXGA at 16.7 million colors to deliver crisp, clear

images.

• Flexible setup allows for front, rear, ceiling and rear ceiling projections.

• Line-of-vision projections remain square, with advanced keystone correction for

angled projections.

• Input source automatically detected.

About this manual

This manual is intended for end users and describes how to install and operate the Qumi.

Wherever possible, relevant information—such as an illustration and its description—has

been kept on one page. This printer-friendly format is both for your convenience and to

help save paper, thereby protecting the environment. It is suggested that you only print

sections that are relevant to your needs.

vi

Table of Contents

Preface .................................................................................................................. ii

Chapter 1 At a Glance ................................................................ 1

Overview ................................................................................................................ 1

Standard Accessories ............................................................................................ 3

Remote Control For HDMI ..................................................................................... 4

Remote Control For MHL ....................................................................................... 6

Remote Control For Media .................................................................................... 8

Qumi and Remote Control Buttons ...................................................................... 10

Media Player Screen ........................................................................................... 10

Chapter 2 Getting Started ........................................................ 11

What You Need .................................................................................................... 11

Setting Up Qumi .................................................................................................. 12

Setting Up the Remote ........................................................................................ 18

Chapter 3 Qumi User Interface ................................................ 19

Overview .............................................................................................................. 19

Connect to PC ..................................................................................................... 20

EZ Media .............................................................................................................24

EZCast Pro ..........................................................................................................32

Chapter 4 On-Screen Display (OSD) Settings........................ 43

OSD Menu Controls ............................................................................................. 43

Setting the OSD Language .................................................................................. 44

OSD Menu Overview ........................................................................................... 45

OSD Menu Overview ........................................................................................... 46

Image Menu ......................................................................................................... 48

Settings 1 Menu ................................................................................................... 51

Settings 2 Menu ................................................................................................... 56

Chapter 5 Taking Care of Your Qumi ...................................... 62

Cleaning the Qumi ............................................................................................... 62

Cleaning the Lens ................................................................................................ 62

Troubleshooting ...................................................................................................63

Vivitek Support Site .............................................................................................. 66

Specications ....................................................................................................... 67

Projection Distance vs. Projection Size ............................................................... 68

Projection Distance and Size Table .....................................................................68

Timing Mode Table ............................................................................................... 69

Qumi Dimensions ................................................................................................ 70

Regulatory Compliance ....................................................................................... 71

Safety Certications ............................................................................................. 71

Disposal and Recycling ....................................................................................... 71

1

Chapter 1 At a Glance

Overview

Front/Top/Right View

Keypad

See Keypad - On-Screen

Display (OSD) buttons

Cooling Vent

Do not cover

Lens

Projection Lens Focus ring

Focus the projected image

Cooling Vent

Do not cover

Right Cursor

Navigate and change settings in the

OSD

Enter Cursor

Change settings in the OSD

Left Cursor

Navigate and change settings

in the OSD

Up Cursor

Navigate and change settings

in the OSD

Menu

Open and exit the OSD

Down Cursor

Navigate and change settings

in the OSD

Return

Return the previous OSD menu

Power Switch

Turn on/off the Qumi

2

Rear/Top/Left View

Bottom View

Audio Out

Connect an audio cable to

speakers or headphones DC In

Connect the supplied

power adapter

HDMI2

Connect a HDMI cable from a

HDMI device

HDMI1/MHL

Connect a HDMI/MHL cable

from a HDMI/MHL device

IR Receiver

Receive IR signal from the

remote control

USB

Connect an USB drive

Rubber Foot Pad

Stability and maintain cooling

ventilation

Cooling Vent

Do not cover

Tripod Connecting Slot

Tripod not included

(Remove the sticker before use)

3

Standard Accessories

Along with the Qumi, the following accessories are included:

Remote Control

(With one 3V CR2025 battery)

Regional Power Cord and Power Adapter

WARRANTY

Documentation Kit

(User Manual, Quick Start Guide, Warranty

Card)

Cable Cores*

Standard HDMI Cable

HDMI/MHL cable

Carrying Case

Contact your dealer immediately if any items are missing, appear damaged, or if the unit

does not work. It is recommended that you keep the original packing material should you

ever need to return the equipment for warranty service.

Note:

Accessories will vary from model to model.

* To ensure a high quality performance from your projection and to prevent

electromagnetic interference (EMI), equip the MHL or HDMI video source cable with the

included cable cores and its location should be close the projector.

4

Remote Control For HDMI

Key Dene OSD Off OSD On

Power On/Off

When system is in standby:

powers on projector

If Power Off menu is displayed:

powers off projector

When system is active:

opens Power Off menu

If other menu is displayed: exits

menu and opens Power Off menu

Up N/A Moves OSD menu highlight

Media Home Returns to Media Home

Page Returns to Media Home page

Left N/A Performs action indicated by menu

Enter / Play /

Pause N/A Performs action indicated by menu

Right N/A Performs action indicated by menu

Menu Opens OSD menu Closes OSD

Down N/A move the highlight of OSD menu

Exit N/A Close OSD

Rewind N/A N/A

Stop N/A N/A

5

Key Dene OSD Off OSD On

Previous N/A N/A

Volume Up Opens Volume menu

If Volume menu is displayed:

Volume level is raised.

If other menu is displayed: closes

menu and opens Volume menu

Volume Down Opens Volume menu

If Volume menu is displayed:

Volume level is lowered.

If other menu is displayed: closes

menu and opens Volume menu.

Mute

If audio is not muted: mutes

audio and opens Mute menu

If Mute menu is displayed, unmutes

audio and displays UnMute menu.

If audio is muted: unmutes

audio and opens UnMute

menu

If UnMute menu is displayed, mutes

audio and displays Mute menu.

If other menu is displayed, closes

menu. If audio is not muted, mutes

audio and opens Mute menu.

If other menu is displayed, closes

menu. If audio is muted, unmutes

audio and opens UnMute menu.

Mode Opens Display Mode menu

If Display Mode menu is displayed:

no event triggered

If other menu is displayed: closes

menu and opens Display Mode

menu

Source Opens Source menu

If Source menu is displayed: no

event triggered

If other menu is displayed: closes

menu and opens Source menu

Blank

If source is displayed and

audio is on: mutes audio and

opens Blank menu

If Blank menu is on : unblanks

image, recovers audio (dependent

on Mute function status)

If source is displayed and

auio is off : opens Blank

menu

If other menu displays: closes

menu, blank Image displays, mutes

audio and opens Blank menu

If source is not selected:

unblanks image, recovers

audio (dependent on Mute

function status)

6

Remote Control For MHL

Key Dene OSD Off OSD On

Power On/Off

When system is in standby:

powers on projector

If Power Off menu is displayed:

powers off projector

When system is active:

opens Power Off menu

If other menu is displayed: exits

menu and opens Power Off menu

Up Moves menu selection up Moves OSD menu highlight

Media Home Returns to Media Home

Page Returns to Media Home page

Left Moves menu selection left Performs action indicated by menu

Enter / Play /

Pause

Enters media sub menu,

Plays / Pauses media

selection

Performs action indicated by menu

Right Moves menu selection right Performs action indicated by menu

Menu Opens OSD menu Closes OSD

Down Moves down in entry list Moves OSD menu highlight

Exit Exits current menu Closes OSD

Rewind Rewinds media play Rewinds media play

7

Key Dene OSD Off OSD On

Stop Stops media play Stops media play

Previous Skips to previous entry in list Skips to previous entry in list

Volume Up Opens Volume menu

If Volume menu is displayed:

Volume level is raised.

If other menu is displayed: closes

menu and opens Volume menu

Volume Down Opens Volume menu

If Volume menu is displayed:

Volume level is lowered.

If other menu is displayed: closes

menu and opens Volume menu.

Mute

If audio is not muted: mutes

audio and opens Mute menu

If Mute menu is displayed, unmutes

audio and displays UnMute menu.

If audio is muted: unmutes

audio and opens UnMute

menu

If UnMute menu is displayed, mutes

audio and displays Mute menu.

If other menu is displayed, closes

menu. If audio is not muted, mutes

audio and opens Mute menu.

If other menu is displayed, closes

menu. If audio is muted, unmutes

audio and opens UnMute menu.

Mode Opens Display Mode menu

If Display Mode menu is displayed:

no event triggered

If other menu is displayed: closes

menu and opens Display Mode

menu

Source Opens Source menu

If Source menu is displayed: no

event triggered

If other menu is displayed: closes

menu and opens Source menu

Blank

If source is displayed and

audio is on: mutes audio and

opens Blank menu

If Blank menu is on : unblanks

image, recovers audio (dependent

on Mute function status)

If source is displayed and

auio is off : opens Blank

menu

If other menu displays: closes menu,

blank Image displays, mutes audio

and opens Blank menu

If source is not selected:

unblanks image, recovers

audio (dependent on Mute

function status)

8

Remote Control For Media

Key Dene OSD Off OSD On

Power On/Off

When system is in standby:

powers on projector

If Power Off menu is displayed:

powers off projector

When system is active:

opens Power Off menu

If other menu is displayed: exits

menu and opens Power Off menu

Up Moves menu selection up Moves OSD menu highlight

Media Home Returns to Media Home

Page Returns to Media Home page

Left Moves menu selection left Performs action indicated by menu

Enter / Play /

Pause

Enters media sub menu,

Plays / Pauses media

selection

Performs action indicated by menu

Right Moves menu selection right Performs action indicated by menu

Menu Opens OSD menu Closes OSD

Down Moves down in entry list Moves OSD menu highlight

Exit Exits current menu Closes OSD

Rewind Rewinds media play Rewinds media play

9

Key Dene OSD Off OSD On

Stop Stops media play Stops media play

Previous Skips to previous entry in list Skips to previous entry in list

Volume Up Opens Volume menu

If Volume menu is displayed:

Volume level is raised.

If other menu is displayed: closes

menu and opens Volume menu

Volume Down Opens Volume menu

If Volume menu is displayed:

Volume level is lowered.

If other menu is displayed: closes

menu and opens Volume menu.

Mute

If audio is not muted: mutes

audio and opens Mute menu

If Mute menu is displayed, unmutes

audio and displays UnMute menu.

If audio is muted: unmutes

audio and opens UnMute

menu

If UnMute menu is displayed, mutes

audio and displays Mute menu.

If other menu is displayed, closes

menu. If audio is not muted, mutes

audio and opens Mute menu.

If other menu is displayed, closes

menu. If audio is muted, unmutes

audio and opens UnMute menu.

Mode Opens Display Mode menu

If Display Mode menu is displayed:

no event triggered

If other menu is displayed: closes

menu and opens Display Mode

menu

Source Opens Source menu

If Source menu is displayed: no

event triggered

If other menu is displayed: closes

menu and opens Source menu

Blank

If source is displayed and

audio is on: mutes audio and

opens Blank menu

If Blank menu is on : unblanks

image, recovers audio (dependent

on Mute function status)

If source is displayed and

auio is off : opens Blank

menu

If other menu displays: closes menu,

blank Image displays, mutes audio

and opens Blank menu

If source is not selected:

unblanks image, recovers

audio (dependent on Mute

function status)

10

Important:

1. Be sure nothing obstructs the path between the remote control and the Qumi. If the path

between the remote control and the Qumi is obstructed, the signal can bounce off certain

reective surfaces.

2. The buttons and keys on the Qumi have the same layout and similar functions as the

corresponding buttons on the remote control. This user’s manual describes the functions

based on the remote control.

Qumi and Remote Control Buttons

The Qumi can be operated using the remote control or the keypad on the top of the

Qumi. All operations can be carried out with the remote control; however, the keypad

on the Qumi carries out the same operations as the remote control by pressing a

combination of keys.

The remote control is not only used to navigate the cursor in the menus, but can also be

used to control the media functions (music and video playback). For more details about

how to control the media functions with the remote control, please refer to 19.

Note:

When the projector is under MHL mode, The keypad on projector should be with the same

denition of the key on remote control.

When MHL function:

For App settings, ▲ Up, ▼ Down, ◄ Left and ► Right are used as directional arrows,

also included ENTER and EXIT.

Controlling your smart device with the remote control:

When the projector projects the contents from your MHL compatible smart device, you can

use the remote control to control your smart device.

To enter the MHL mode, the following buttons are available for controlling your smart

device, Arrow keys (▲ Up, ▼ Down, ◄ Left, ► Right), EXIT control buttons..

Media Player Screen

The media player screen is the main interface for the Qumi Q6 Series. If a USB drive is

plugged in when powering on the Qumi, the media player screen appears. In the media

player screen, you can choose the type of media to display by selecting:

• EZ Media – Allows the use of media stored in the internal memory or a connected

USB drive to display photos, music, audio and documents.

• EZCast Pro – Allows the streaming of media from smart devices or mirroring of

connected Android/iOS/Mac/Windows devices.

• Connect to PC – Allows the use of a connected PC as a storage device.

11

Chapter 2 Getting Started

What You Need

Many types of external devices and peripherals can be connected to the Qumi. External or

portable music players can be connected to play music. DVD, VCD and VHS players can

be connected to play movies. Camcorders and digital cameras can also be used to play

videos and display photos. Computers can be connected, as well as peripherals such as

USB drives to display documents and other types of media.

These devices can be connected to the Qumi by using an appropriate cable. Make sure

that the connecting device has an appropriate output connector.

Warning:

As a safety precaution, disconnect all power to the Qumi and connecting devices before

making connections.

Connect AC power adapter

Connect audio

Insert USB device Connect HDMI/MHL peripherals

Connect HDMI peripherals

12

Setting Up Qumi

Connecting Peripherals by HDMI

Connect HDMI-compatible peripherals to the Qumi by using an HDMI cable (Optional).

Game

Console Personal

Computer

SmartphoneCamera Blue Ray

DVD player

Connecting to an MHL Device

Connect your Qumi to a MHL-compatible device by using an HDMI/MHL cable.(Optional)

TabletSmartphone

Note:

For some MHL compatible devices, whose output is not thru micro-USB, an extra cable

adaptor may be required.

Adapters for Samsung devices are sold separately.

13

Inserting a USB Drive

Connect a USB drive to the Qumi by inserting the storage device(s) into the appropriate

port.

Connecting Audio

Connect earphones or mini speakers to the Qumi by inserting into the Audio Out port.

Headphone Mini Speaker

14

Starting and Shutting down the Qumi

1. Connect the AC power adapter

to the Qumi. Connect the other

end of the AC power adapter to

a wall outlet.

Note:

Adapter models may vary

between regions.

2. Press the POWER button to

turn on the Qumi.

The Qumi splash screen

displays and connected devices

are detected.

See Setting an Access

Password (Security Lock) on

page 16 if security lock is

enabled.

Page is loading ...

Vivitek Qumi Q6 User manual

This manual is also suitable for

Vivitek Qumi Q6 User manual

Related papers

Other documents