Vivitek Vivitek Qumi Q3 Plus GD User manual

Brand: Vivitek

Model: Vivitek Qumi Q3 Plus GD

Type: User manual

Preface

are the property of their respective owners. All values, weights and sizes in this Manual are

approximate values. Specifications are subject to change without notice.

Disclaimer

The information in this document is subject to change without notice. The manufacturer makes

no representations or warranties with respect to the contents hereof and specifically disclaims

any implied warranties of merchantability or fitness for any particular purpose. The

manufacturer reserves the right to revise this publication and to make changes from time to time

in the content hereof without obligation of the manufacturer to notify any person of such

revision or changes.

Trademark Recognition

HDMI, the HDMI Logo, and High-Definition Multimedia Interface

are trademarks or registered trademarks of HDMI Licensing LLC in

the United States and other countries.

iii

Important Safety Information

Important:

It is strongly recommended that you read this section carefully before using Qumi. These safety

and usage instructions that will make sure you enjoy many years of safe use of Qumi. Keep this

manual for future reference.

Symbols Used

Warning symbols are used on the unit and in this manual to alert you of hazardous situations.

The following symbols are used to call attention to important information.

Note:

Provides additional information on the topic at hand

Important:

Provides additional information that should not be overlooked.

Caution:

Alerts you to situations that may damage the unit..

Warning:

Alerts you to situations that may damage the unit, create a hazardous environment, or

cause personal injury..

Throughout this manual, component parts and items in the OSD (On-Screen Display) menus are

denoted in bold font as in this example:

“Press the Menu button on the remote controller to open the Setting menu”.

General Safety Information



Do not open the casing. There are no user-maintainable parts inside the projector. For

any maintenance, please contact a qualified service technician.

Follow all warnings and precautions on the machine or in this Manual.

According to its design, the projection light source is extremely bright. To avoid harm to

eyes, do not look straight at the lens when the LED is ON.

Do not place the machine on unstable surface or stand.

Avoid using the system near water, in direct sunlight, or near a heating device.

Do not place any heavy objects (e.g., books or bags) on the unit..

Qumi Installation Notice

 Allow at least a 20" (500mm) clearance around the exhaust vent.

 Make sure that the intake vents do not recycle hot air from the exhaust vent.

 When operating Qumi in an enclosed space, make sure that the surrounding air temperature

within the enclosure does not exceed operating temperature while Qumi is running, and the air

intake and exhaust vents are unobstructed.

 All enclosures should pass a certified thermal evaluation to make sure that Qumi does not

recycle exhaust air, as this may cause the device to shutdown even if the enclosure temperature

is with the acceptable operating temperature range.

Caution:

Avoid usage of Qumi in dusty environment.

Power Supply Safety

 Only use the supplied adapter.

 Do not place anything on the cord. Place the cord where it will not be in the way of foot traffic.

 Remove the battery from the remote control when storing or not in use for a prolonged period.

Cleaning Qumi

 Before cleaning, disconnect the power supply cables. See “Cleaning Qumi” in Page 37.

Note:

Qumi will be warm after usage. Allow Qumi to cool down before storing in a compartment.

Control Warning

Before installing and using Qumi, read the regulatory notices in the Regulatory Compliance on

page 48.

Symbol Explanations

DISPOSAL: Do not use household or municipal waste collection services for

disposal of electrical and electronic equipment. EU countries require the use

of separate recycling collection services.

Main Features



HD720p resolution with a 16:9 aspect ratio.

Up to 500 lumens of brightness and 5,000:1 contrast for brilliant and sharp images.

Project a large 100” (diameter) high definition image from only 12" (3.7) meters from

the projection surface.

Long life energy efficient LED light source with an estimated 30,000 hours of operation.

Wirelessly stream and project documents, photos, movies and other content with the

integrated wireless (Wi-Fi) system.

Built-in

audio speakers with audio-out port and Bluetooth for attachment of external

speakers.

About this Manual

This manual is intended for end users and describes how to install and operate Qumi. Wherever

possible, relevant information—such as an illustration and its description—has been kept on

one page. This printer-friendly format is both for your convenience and to help save paper,

thereby protecting the environment. It is suggested that you only print sections that are relevant

to your needs.

Table of Contents

Preface ..................................................................................................................................................... ii

Chapter 1 At a Glance ............................................................................................................................ 1

Overview .................................................................................................................................................. 1

Standard Accessories: .............................................................................................................................. 3

Remote Control ........................................................................................................................................ 4

Setting Up the Remote Control ................................................................................................................ 5

Chapter 2 Getting Started ...................................................................................................................... 6

What you need ......................................................................................................................................... 6

Setting Up Qumi ....................................................................................................................................... 7

HappyCast - Android Setup ................................................................................................................... 12

HappyCast - iOS Setup .......................................................................................................................... 13

Chapter 3 Qumi User Interface ............................................................................................................. 15

Views ...................................................................................................................................................... 15

Photo ...................................................................................................................................................... 16

Video ...................................................................................................................................................... 17

Music ...................................................................................................................................................... 18

Document ............................................................................................................................................... 19

APP Store ............................................................................................................................................... 20

Browser .................................................................................................................................................. 21

Apps ....................................................................................................................................................... 22

WiFi ....................................................................................................................................................... 23

Settings ................................................................................................................................................... 24

Chapter 4 On-Screen Display (OSD) Settings ........................................................................................ 25

OSD Menu Controls ................................................................................................................................ 25

OSD Menu Overview .............................................................................................................................. 26

OSD Language Settings ........................................................................................................................... 27

Chapter 5 Taking Care of Your Qumi ..................................................................................................... 37

Cleaning Qumi ........................................................................................................................................ 37

Cleaning the Lens ................................................................................................................................... 37

Troubleshooting ..................................................................................................................................... 38

Vivitek Support Site ................................................................................................................................ 41

Specifications ......................................................................................................................................... 42

Projection Distance vs Projection Size ................................................................................................... 43

Projection Distance and Size Table ........................................................................................................ 43

Timing Mode Table ................................................................................................................................. 44

Qumi Dimensions ................................................................................................................................... 45

Regulatory Compliance .......................................................................................................................... 46

Safety Certifications ............................................................................................................................... 46

Disposal and Recycling ........................................................................................................................... 46

Chapter 1 At a Glance

Overview

Front/Top/Right View

and Sliding Lens protector

Rear/Top/Left View

Bottom View

Standard Accessories:

Along with Qumi, the following are accessories include:

Remote control (with one CR2025 battery)

Regional Power Cord and Power Adapter

Documentation Kit

(Quick Start Guide, Warranty Card)

Standard HDMI cable

Contact your dealer immediately if any items are missing, appear damaged, or if the unit does

not work. It is recommended that you keep the original packing material in case you ever need

to return the equipment for warranty service.

Remote Control

Setting Up the Remote Control

The remote control comes with one (1) 3V lithium battery

(CR2025). The battery is pre-installed in the remote control.

To begin using the remote control, remove the plastic tab (A)

from the battery compartment. Use a screwdriver to remove the

battery cover by turning counter-clockwise 1/8 turn.

Replacing the Remote Control’s Batteries

Remove the battery

compartment cover

by turning the cover

towards the arrow

(A). Then lift the

cover out towards

the arrow (B)..

Remove the old

battery and insert

the new battery

with the positive

side facing up.

Install the cover and turn

as shown in the

illustration.

Caution:

1. Only use 3V lithium battery (CR2025).

2. Dispose of used batteries according to local ordinance regulations.

3. Remove the battery when not using Qumi for prolonged periods.

Operating Range

The remote control uses infrared (IR) transmission to control Qumi. It is necessary to point

the remote towards Qumi..

The remote control functions properly within a radius of approximately 7 meters (23 feet) and

15 degrees above or below the Qumi level (If the remote is not held perpendicular to the sides

or rear of Qumi).

If Qumi is unresponsive to the remote control, move closer towards Qumi or it may be

necessary to replace the battery.

Chapter 2 Getting Started

What you need

Qumi can be connected to many types of external devices and peripherals. To play

music, connect Qumi to an external or portable music player. To play films, connect Qumi to a

DVD, VCD or VHS player using HDMI interface. To play video and display photos, connect

Qumi to a video camera and digital camera using HDMI interface. To display files and other

types of media, connect Qumi to peripherals like a computer or USB drive.

These devices can be connected to Qumi using an appropriate cable. Make sure that

the connecting device has an appropriate output connector. See below for more connectivity

information:

Setting Up Qumi

Connecting Peripherals by HDMI

Connect HDMI-compatible peripherals to Qumi using an HDMI cable (included)

Inserting a USB device

Connect a USB device to Qumi by inserting the device(s) into the appropriate port.

Connecting Audio

Connect earphones or speaker to Qumi by inserting into the AV-in

port.

Bluetooth Audio out is also available under Settings, Bluetooth. Turn Bluetooth "ON" and pair audio

device.

Charging the Battery

Follow the below steps to charge Qumi:

Connect the AC power adapter to Qumi.

Connect the other end of AC power adapter to a wall outlet.

During charging, the blue light on the AC power adapter will be on. After being fully charged,

the blue light will automatically shut off.

Note:

The battery will be fully charged in about 3 to 4 hours.

Starting and Shutting Down Qumi

Connect the AC power adapter to

Qumi. Connect the other end of AC

power adapter to a wall outlet.

Note:

The adapter models may differ

between countries.

Press power button to turn on

Qumi.

 When AC power adapter is

connected, press the power

button for 1 second.

 When AC power adapter is not

connected, press the power

button for 3 seconds.

Qumi splash screen displays

and connected devices are detected

at this time but not displayed.

If several input devices are connected, press the SOURCE

selection (signal source) button on the remote control to

toggle between inputs. Please allow a few seconds for

projector to sync to each input.

 HDMI: HDMI

 USB 1: USB Connection

 USB 2: USB Connection

Press power button to power off Qumi.

When “Power off/Please press the power button again”

message appears, press power button. The projector

will turn off.

Power off?

Please press the power button

again

Adjusting the Projector Level

Flip down the kickstand to adjust the height of the

projected image

Using a Tripod

Qumi can be used with a tripod by connecting the

tripod to the bottom of Qumi. Many typical tripods

can be connected.

Supported Tripod Specifications:

• Type: Tripod

• Socket size: 1/4"- 20, L6.3 mm

To abort power off after pressing the power button once,

press another remote button apart from power button.

HappyCast - Android Setup

Allows the mirroring of connected Android devices (smartphone, tablet).

Option 1 (Your Android device is connected to your Qumi WiFi hotspot):

1. Enable the Qumi’s Portable WiFi hotspot function (Inside the

Android operating system).

A. Qumi Home Screen  Settings  General  More 

Portable Hotspot

i. √ Tick Portable Wi-Fi hotspot

ii. Return to Splash screen by pressing the Exit button

on the Remote several times.

2. Start the HappyCast App on your Qumi, located in the App

Folder. Ensure that you are connected to the Internet by

turning Wi-Fi ON by selecting WiFi Icon on Splash Screen

and Selecting "ON"

3. Scan the QR code (Quick Response), with your Android

device, to download and install the HappyCast mobile app.

Follow onscreen instructions to complete app installation.

4. After your Android device is connected to your Qumi’s WiFi

hotspot, start HappyCast app to enable screen mirroring.

Option 2 (Your Android device and your Qumi are connected to the same home/office WiFi

network):

1. Ensure that your Android device and your Qumi are

connected to the same home/office WiFi network.

2. Start the HappyCast App on your Qumi, located in the

Apps Folder.

3. Scan the QR code (Quick Response), with your Android

device (may require a QR Reader App to do so) to download

and install the HappyCast mobile App. Follow on-screen

instructions to complete A

pp installation.

You may need to allow installation of Apps from unknown

sources on your Android device. Go to Settings > Security

> Unknown sources > Enable

4. Start HappyCast on your Android device, and enable screen

mirroring.

HappyCast - iOS Setup

Option 1 (Your iOS device is connected to your Qumi WiFi hotspot):

1. Enable the Qumi’s Portable WiFi hotspot function (Inside the Android operating system).

Qumi Home Screen  Settings  General  More  Portable Hotspot

√ Tick Portable Wi-Fi hotspot

2. Start the HappyCast App on your Qumi, located in the Apps Folder on the Splash

Screen.

3. On your iOS device, slide up from the bottom of the screen to display the control console.

The AirPlay button should appear, then click on it. Select the suitable device to switch on

the screen mirroring.

Option 2 (Your iOS device and your Qumi are connected to the same home/office WiFi network):

1. Ensure that your iOS device and your Qumi are under the same home/office Wi-Fi network

(Same Wireless Access Point and SSID)

2. Start the HappyCast App on your Qumi, located in the Apps Folder.

3. On your iOS device, slide up from the bottom of the screen to display the control console.

The AirPlay

button should appear (see below) then turn Airplay on. Select HappyCast to

switch on the screen mirroring to Qumi.

4. To Exit Screen mirroring, turn off Mirroring under Airplay on the mobile device.

Page is loading ...

Vivitek Vivitek Qumi Q3 Plus GD User manual

Vivitek Vivitek Qumi Q3 Plus GD User manual

Vivitek Vivitek Qumi Q3 Plus GD User manual

Related papers

Other documents