Galicia Coffee Table User manual

Type
User manual
Size:
Colour:
Finish:
75 x 38 x 30 cm (WDH)
White or Grey or Black
Melamine Cabinet with Gloss Faces
GALICIA COFFEE TABLE ASSEMBLY INSTRUCTIONS
Thank you for purchasing the Galicia Coffee Table With LED.
Please read the instructions carefully to ensure safe operation of this product
Version 4 - 220217
PO No
Page 1 of 11
PLEASE READ this sheet prior to assembly to familiarise yourself with the various stages of construction.
Carefully open the pack supplied and check the contents against the parts and fittings check list. Do not
destroy any of the packaging until you are certain that you have all the necessary parts for the assembly.
CAUTION: There are small components used in the construction of this unit. These loose items should be
kept away from young children whilst assembling your unit to avoid the danger of choking.
Tools Required
1 Hour
Set Up
Version 4 - 220217
Page 2 of 11
IMPORTANT - READ CAREFULLY - RETAIN THESE INSTRUCTIONS FOR
FUTURE REFERENCE.
INFORMATION
CARE INFORMATION
To clean, wipe with a damp cloth.
Never use scourers, abrasives or chemical cleaners.
Do not use solvent based cleaners or detergents as they can bleach or damage the product.
This product is designed to hold 20 Kg in total, spread evenly over the whole unit.
Do not exceed this weight.
We recommend that this unit is assembled in the room intended for use.
When you are ready to start, make sure that you have the right tools, plenty of space and a
clean, dry area for assembly.
Unwrap all packaging materials and place the components on top of the carton box or on a
clean floor to prevent them from scratching.
Check the pack and make sure you have all the parts listed.
Ensure that this product is fully assembled as illustrated before use.
Check all screws or bolts are tightened and inspect regularly
Tools not included unless specified in parts list.
WARNINGS
DO NOT
DO NOT
DO NOT
DO NOT
use power tools to construct this product.
tighten screws until parts are assembled or as advised in this guide.
over tighten screws or bolts.
use this product if parts are missing, damaged or worn.
GALICIA COFFEE TABLE ASSEMBLY INSTRUCTIONS
GALICIA COFFEE TABLE ASSEMBLY INSTRUCTIONS
Version 4 - 220217
Page 3 of 11
Parts and Fittings Checklist
Please check the pack contents before assembling the product. If any components are missing,
please contact your retailer.
The fittings pack contains small items that should be kept away from children.
All parts are packed in one carton
Size: 285 x 348 x 15 mm
Carton No: 1/1
Description: Side Panels
Qty: 2
Carton No: 1/1
Carton No: 1/1
4 5
Qty: 1
Qty: 2
Size: 750 x 350 x 15 mm
Size: 750 x 70 x 15 mm
123
Description: Top Panel
Description: Plinth
Description: Base Panel
Qty: 1
Size: 718 x 348 x 15 mm
Carton No: 1/1
palF :noitpircseD
Qty: 2
Size: 747 x 140 x 15 mm
Carton No: 1/1
GALICIA COFFEE TABLE ASSEMBLY INSTRUCTIONS
Screw for Fitting Hinge
(3.5x12mm)
16A
16B
12
C
E 32
Item QuantityCode
Fittings (to scale)
Cam Lock
Dowel (8x30mm)
Cam Bolt
10 20 30 40 50 60 70 80
(38mm overall)
Version 4 - 220217
Page 4 of 11
Fittings (not to scale)
QuantityCode Item
2
4
NFlap Stay - RH
Q
QuantityCode Item
2
2
Cable Clip
LED Clip
1
H
Battery Box and
Blue LED Strip
(50 cm)
6G Screw for LED
& Cable Clips
J
K
1
Sticky Pad
T
Fittings packed in each LED pack.
Flap Hinge &
Hinge Plate Set 35
GALICIA COFFEE TABLE ASSEMBLY INSTRUCTIONS
General Hints & Tips
Version 4 - 220217
Page 5 of 11
Fittings required
For this step:
Tools required
STEP 1
A x16
x2
x2
A28mm
A
A
B
Tighten
Stop when
level
Ax4
Ax2
Ax4
Fittings required
For this step:
Tools required
Version 4 - 220217
Page 6 of 11
STEP 2
STEP 3
For this step:
Tools required
Tighten
B
Fittings required
B x4
C x4
GALICIA COFFEE TABLE ASSEMBLY INSTRUCTIONS
B x4
C x4
Bx2
Bx2
Cx2
Cx2
Cx2
Bx2
Bx2
Cx2
Fittings required
Version 4 - 220217
Page 7 of 11
STEP 4
STEP 5
For this step:
Tools required
Fittings required
For this step:
Tools required
GALICIA COFFEE TABLE ASSEMBLY INSTRUCTIONS
Q x4
E x8
E
E
E
Q
Q
Q
x2
G x6
J x2
K x2
H x1
T x1
Position wires and fit LED Clip (J) and
Cable Clip (K) using screws (G).
Peel off cover from sticker (T) and
adhere to back of battery box then
adhere to side panel.
G
G
K
J
x2 x2
T
TOP
Fittings required
B x8
C x4
Version 4 - 220217
Page 8 of 11
STEP 6
STEP 7
For this step:
Tools required
Fittings required
For this step:
Tools required
GALICIA COFFEE TABLE ASSEMBLY INSTRUCTIONS
Bx2
Bx2
Bx2
C
C
C
C
1
2
E
E x8
Bx2
Version 4 - 220217
Page 9 of 11
STEP 8
For this step:
Tools required
Fittings required
GALICIA COFFEE TABLE ASSEMBLY INSTRUCTIONS
Fittings required
Version 4 - 220217
Page 10 of 11
STEP 9
STEP 10
For this step:
Tools required
GALICIA COFFEE TABLE ASSEMBLY INSTRUCTIONS
N x2
E
Once flaps have been adjusted,
fix in two screws (E) into spare
holes to secure hinge mounting
plates in their final position.
E x16
E
EN
ii
i
iii iv
CHANGING THE BATTERIES
SLIDE OFF THE LID CHANGE BATTERIES
SLIDE LID BACK ON
USE GOOD QUALITY AA BATTERIES. FOR BEST RESULTS USE RE-CHARGEABLES.
Version 4 - 220217
Page 11 of 11
Assembly Completed
Your Galicia Coffee Table is now completely assembled.
Periodically check to ensure that the components are in their proper position, free from damage.
Also, make sure the connectors are tight and secure.
Keep instructions for future reference
GALICIA COFFEE TABLE ASSEMBLY INSTRUCTIONS
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11

Galicia Coffee Table User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI