QS_EVO55_System_EN_v3.2
For further information,
scan the QR Code
or refer to the following
web address:
www.ideaproaudio.com/evo55-
system
EVO55 System
Dual-5” 4-element Active Line-Array System QuickStart Guide
IDEA is always in pursuit of better performance, greater reliability and design features. Technical
specications and minor nish details may vary without notice in order to improve our products.
©2022 - I MAS D Electroacústica SL Pol. A Trabe 19-20 15350 Cedeira (Galicia – Spain)
EVO55 System is a unique professional portable sound reinforcement solution that oer
excellent modularity and versatility.
The very compact 4-element array cluster (smaller than a typical 15” 2-way loudspeaker)
will always deliver SPL and coverage beyond the physical size of the system, while it can
be rigged and operated with minimal logistical resources. It can be pole mounted, stacked
and own very easily by only operator.
EVO55 loudspeakers features HF assembly with a 1.75” compression driver and a
proprietary wave-guide design and a dual-5” woofer conguration for the LF section. These
premium-quality, high-performance European transducers a dedicated passive crossover
lter allow for a natural, linear response throughout the useful frequency range spectrum
without any processing of the system.
The integrated weatherized steel rigging structure and stacking, transport and rigging
accessories make EVO55 a really plug-and-play system.
EVO55-M EVO55-P
Enclosure design 5˚ Trapezoidal · Ported
HF Transducer 1 x 1.75” Compression Driver
LF Transducer 2 x 5” High Performance Woofers
Amp/DSP Module 1.4 kW -
RMS Power Handling * - 300 W
Nominal Impedance - 16 Ohm
SPL (Continuous/Peak) 119/125 dB SPL
SPL (Continuous/Peak) 4-element system 125/131 dB SPL
Frequency Response (-10 dB) per element 69 - 19000 Hz
Frequency Response (-3 dB) per element 95 - 17000 Hz
Connectors XLR + PowerCON + NL-4 2 x NL-4
Dimensions (WxHxD) 416 x 154 x 396 mm
(16,4 x 6,1 x 15,6 inch)
416 x 154 x 334 mm
(16,4 x 6,1 x 13,1 inch)
Dimensions (WxHxD) - System 416 x 154 x 396 mm
(16,4 x 6,1 x 15,6 inch)
Weight - per element 15.8 kg (33.3 lbs) 13.3 kg (29.3 lbs)
Weight - System 55.7 kg (122.8 lbs)
STATUS
+6
-∞
SIGNAL
CLIP/TEMP
PRESET
SELECT
INPUT
LINK
OUTPUT
A
OUTPUT
B
Maximum 2 x EVO55-P
Maximum 1 xEVO55-P
12 unitsPRESET 4
8 unitsPRESET 3
6 unitsPRESET 2
4 unitsPRESET 1
Suspension of this product should be implemented
by qualified professionals following safe rigging
practices and local regulations.
Refer to the owner's manuals for rigging
instructions, system components and suspension
hardware intended for this product.
PRODUCT OF EUROPE
Made in Spain
Designed, engineered and manufactured by
Designed, engineered and manufactured by
IDEA in Cedeira (Galicia)
IDEA in Cedeira (Galicia)
EVO55-M
Power supply:
Universal regulated switch mode
Current consumption: 0.81 A
Nominal power requirement:
100-240 V 50-60 Hz
MAX
16 units
1,4
kW 1,2 A
36.5 kg
416 mm
334 mm
154 mm
154mm
396 mm
TECHNICAL DATA
SpeakON NL-4 Links
XLR Audio Input
PowerCON AC Input
STATUS
+6
-∞
SIGNAL
CLIP/TEMP
PRESET
SELECT
INPUT
LINK
OUTPUT A
OUTPUT B
Maximum 2 x EVO55-P
Maximum 1 xEVO55-P
12 unitsPRESET 4
8 unitsPRESET 3
6 unitsPRESET 2
4 unitsPRESET 1
Suspension of this product should be implemented
by qualified professionals following safe rigging
practices and local regulations.
Refer to the owner's manuals for rigging
instructions, system components and suspension
hardware intended for this product.
PRODUCT OF EUROPE
Made in Spain
Designed, engineered and manufactured by
IDEA in Cedeira (Galicia)
EVO55-M
Power supply:
Universal regulated switch mode
Current consumption: 0.81 A
Nominal power requirement:
100-240 V 50-60 Hz
MAX
16 units
1,4 kW
RMS 1,2 A
36.5 kg
BASIC SYSTEM CONFIGURATION The active EVO55-M element features a 1.4
kW Class-D amp and DSP power module by
Powersoft so one EVO55-M element powers 3
EVO55-P elements, as shown in the diagram on
the left, with the dedicated SpeakON NL-4 cable
links included with every EVO55-M.
Depending on the scale of the application, a
medium-sized EVO55-M system can be easily
split into smaller clusters for mobile and portable
solutions.
Passive systems can be congured as factory
ready with TEOd8 driven amps.