1of 3
Tools Required
Warnings and Cautions
Turn off the electricity at the circuit breaker
before installation. Consult a licensed
electrician if in doubt about installation.
Turn off power to the fixture and allow the
bulbs to cool before replacing.
Package Contents
Crossbar Assembly Ceiling Canopy
Wiring
Table of
Contents
STEP 1 STEP 3STEP 2
Bulb
STEP 4
Preparation: Identify and inspect all parts before
beginning the installation.
Missing or damaged parts? Contact your original
place of purchase.
Crossbar Assembly
x 1
A
PARTS BAG
Outlet Box Screw
x 2
B
Wire Connector
x 3
C
Light Source
4 BULBS REQUIRED
BULBS NOT INCLUDED
BULB BASE TYPE
Candelabra (E12)
BULB SHAPE
TYPE B
60W
MAX
Fixture Body
x 1
D
Installation Instructions: UQL3821
www.urbanambiance.com
2of 3
STEP 1 1 2 3
Step 1
Install crossbar assembly
Step 2 - 3
Test fitting ceiling canopy to
mounting screws
STEP 2
*Green Ground Screw on
crossbar optional
White wire (neutral)
from outlet box White wire
from fixture
Black wire
from fixture
Ground wire
from Fixture
Black or Red wire (hot)
from outlet box
Bare or Green ground wire
from outlet box
www.urbanambiance.com
3of 3
STEP 3
STEP 4
www.urbanambiance.com
/
