GE ISOVOLT Mobile 160 Quick start guide

GE
Brand
GE
Model
ISOVOLT Mobile 160
Type
Quick start guide

GE ISOVOLT Mobile 160 The GE ISOVOLT Mobile 160 is a portable, battery-powered X-ray generator that is designed for use in a variety of industrial and non-destructive testing applications. It is capable of generating X-rays with energies up to 160 kV, and it features a number of advanced features that make it easy to use and operate. Some of the key features of the GE ISOVOLT Mobile 160 include:

  • Portable and lightweight: The GE ISOVOLT Mobile 160 weighs just 16 kg, making it easy to transport and use in a variety of locations.
  • Battery-powered: The GE ISOVOLT Mobile 160 is powered by a rechargeable battery, which provides up to 4 hours of continuous operation.

GE ISOVOLT Mobile 160 The GE ISOVOLT Mobile 160 is a portable, battery-powered X-ray generator that is designed for use in a variety of industrial and non-destructive testing applications. It is capable of generating X-rays with energies up to 160 kV, and it features a number of advanced features that make it easy to use and operate. Some of the key features of the GE ISOVOLT Mobile 160 include:

  • Portable and lightweight: The GE ISOVOLT Mobile 160 weighs just 16 kg, making it easy to transport and use in a variety of locations.
  • Battery-powered: The GE ISOVOLT Mobile 160 is powered by a rechargeable battery, which provides up to 4 hours of continuous operation.
X-ray Warning Flash Lamp
with „FAIL-SAFE CIRCUIT“
When X-rays are being generated from
an X-ray tube there must be a clear
and safe indication of this hazardous
condition. All GE Inspection Technolo-
gies controls are equipped with multiple
warning facilities, including the „High
Voltage ON“ indication lamp on the
control panel.
While other external warning lamps
might fail due to a defective bulb or
other reasons, this „High Voltage ON“
lamp is connected in a fail-safe circuit
causing the high voltage to be inter-
rupted in the event of bulb burnout or
other malfunction.
This has been a standard feature on
all modern GE Inspection Technologies
controls for over two decades.
The protection oered by the X-RAY
WARNING FLASH LAMP with „FAIL-SAFE
CIRCUIT“ is now available in this exter-
nal warning lamp, too, as required by
DIN 54113 and many other new safety
standards. A built-in opto-electronic cir-
cuit monitors the function of the ash
lamp. Should the bulb of the warning
lamp cease to function for any reason,
the circuit will interrupt the high voltage
and the generation of X-rays.
Application
GE
Sensing & Inspection Technologies
© 2010 General Electric Company. All Rights Reserved. Specications are subject to change without notice. GE is a registered trademark of General Electric Company. Other company or product names
mentioned in this document may be trademarks or registered trademarks of their respective companies, which are not aliated with GE.
Contact: GE Sensing & Inspection Technologies GmbH, Bogenstrasse 41, 22926 Ahrensburg, Germany, T +49 (0)4102 807 0
GEIT-30057EN (08/10)
www.gesensinginspection.com
Technical Data
The Warning Flash Lamp is available for the following products:
Type Voltage Color ID No.
ERESCO MF3/MF4 230 VAC yellow 7450110
ERESCO MF3/MF4 230 VAC red 7450111
ERESCO MF3/MF4 115 VAC yellow 7450120
ERESCO MF3/MF4 115 VAC red 7450121
ISOVOLT HS/TITAN 42 VAC yellow 7186462
ISOVOLT HS/TITAN 42 VAC red 7186464
ERESCO MF1/MF2 42 VAC red 7186460
ERESCO MF1/MF2 42 VAC yellow 7186461
The ash bulb is pulsed at a frequency of approx. 1 ash per sec-
ond giving bright and distinct periodical ashes through a yellow
(optional red) transparent perspex cover.
The lamp housing is anodized aluminium with a stainless steel
hanger. An optional tripod stand (7192730) is available upon re-
quest.
Note: The X-ray warning ash lamp complies with IP 54 protec-
tion class.
Fig 1: Version with red cover
Fig 2: Tripod stand
  • Page 1 1
  • Page 2 2

GE ISOVOLT Mobile 160 Quick start guide

GE
Brand
GE
Model
ISOVOLT Mobile 160
Type
Quick start guide

GE ISOVOLT Mobile 160 The GE ISOVOLT Mobile 160 is a portable, battery-powered X-ray generator that is designed for use in a variety of industrial and non-destructive testing applications. It is capable of generating X-rays with energies up to 160 kV, and it features a number of advanced features that make it easy to use and operate. Some of the key features of the GE ISOVOLT Mobile 160 include:

  • Portable and lightweight: The GE ISOVOLT Mobile 160 weighs just 16 kg, making it easy to transport and use in a variety of locations.
  • Battery-powered: The GE ISOVOLT Mobile 160 is powered by a rechargeable battery, which provides up to 4 hours of continuous operation.
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents