Page is loading ...
ERESCO 200 MF4-R
Portable X-ray Unit 200 kV Directional Radiating Tube Head, air cooled
The X-ray tube head consists of a sturdy
metal-ceramic X-ray tube and high volt-
age generator integrated into a rugged
compact housing. The air-cooled 200 kV/
600 W end-grounded X-ray tube is ther-
mally protected for extended life.
The high voltage generator produces
high-stability direct voltage at higher ef-
ciency than conventional line frequen-
cy equipment.
The unit is designed for radioscopic ap-
plications respectively for applications
with CR / Film where geometric enlarge-
ment is required.
The performance of the X-ray tube and
the high voltage generator is continu-
ously monitored for protection and op-
erational safety. An on-board real time
clock facilitates fully automatic warm-
up routines for optimized and time-
saving tube conditioning. The exible
connecting cable is heavy-duty and
light weight.
Additional Features
• Rugged construction with proven reliability
• Gas insulated high voltage section reduces size & weight
• End-grounded, Be-window, metal-ceramic X-ray tube
• DC voltage operation
• Modern power electronics provides high stability
• On-board real time clock supports fully automatic warm-up
• Extended operating range from 10 kV to 200 kV enables exible use
• Large 40° x 60° emergent beam
• Optimized air-ow cooling for efcient heat dissipation
• 100% duty cycle at 30° Celsius (86° F)
• Built-in fail-safe warning lamp
• CE certication according to EMC and Low Voltage Directives
• Water / dust resistant in accordance with protection class IP65
• Produced under ISO 9001 certied quality management system
• Also available as water-cooled version ERESCO 200 MF4-RW
Standard Delivery Scope
See product info “ERESCO MF4 Control”
GE
Sensing & Inspection Technologies
© 2008 General Electric Company. All Rights Reserved. Specications are subject to change without notice. GE is a registered trademark of General Electric Company. Other company or product names
mentioned in this document may be trademarks or registered trademarks of their respective companies, which are not afliated with GE.
Contact: GE Sensing & Inspection Technologies GmbH, Bogenstrasse 41, 22926 Ahrensburg, Germany, T +49 (0)4102 807 0
GEIT-30179EN (11/08)
www.gesensinginspection.com
Options
• Carrying cradle
• Diaphragm / collimator attachments
• Laser centering device
• Telescope centering device
• Transport and positioning cart
• Fail-safe ashing warning lamp
• Stands and mounting kits
• Aluminium transport box
drawings not true to scale
X-ray tube type 200 kV metal-ceramic with Tungsten (W) anode
kV range 10 - 200 kV (acc. to rating chart)
Target angle 20°
Inherent filtration 0.8 mm ± 0.1 mm, Be
Emergent beam 40° x 60°, elliptical
Focal spot size (EN 12 543) 1.0 mm (~0.5 IEC 336)
Tube current 0.5 - 10 mA (3.0 mA /200 kV)
Anode temperature, max. 100 °C
Current and voltage stability ± 1%
Continuous rating 600 W
Power input, max. 1.0 kVA
Weight 26.8 kg (59.1 lbs)
Tube head diameter 160 mm (6.3“) (without rings)
Protection class IP65
Operating Temperature -20°C to +50°C
Storage Temperature -30°C to +80°C
Technical Data
Rating chart
/