Atdec TH-WH-PJ-CM Datasheet

Atdec
Brand
Atdec
Model
TH-WH-PJ-CM
Category
Projector mounts
Type
Datasheet
TM
Dimensions
Technical Specifications
TELEHOOK
Universal Projector Ceiling Mount
Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. Published: 16.02.07
Ceiling
Plate
Specifications
(not
to
scale)
Projector
NOTE: 4 sets of Extension Bracket lengths are
included to suit most mounting configurations.
Any combination of these brackets may be used.
2x100mm (4”)
2x50mm (2”)
2x75mm (3”)
Minimum reach = 65mm (2 “)
(from centre of bracket)
9
16
65mm
(2 “)
9
16
200mm
(7 “)
7
8
Maximum reach = 200mm (7 “)
(from centre of bracket)
7
8
2x150mm (5 ”)
7
8
Projector mounting screws and washers included:
- M2.5x15 (x4)
- M3x15 / M3x20 (x4 each)
- M4x15 / M4x20 / M4x25 / M4x30 ...... (x4 each)
- M5x15 / M5x20 / M5x25 / M5x30 ...... (x4 each)
- M6x15 / M6x20 / M6x25 / M6x30 ...... (x4 each)
- Washer 10mm / 8mm (x4 each)
Mounting hardware included:
- Nylon Anchor Plug (x4)
- 14 Guage Coach Screw (x4)
- Washer 20mm (x4)
NOTE: - This product has been designed to
suit 90% of projectors
- Maximum load =15kg (33lbs)
- Mounting hardware included
  • Page 1 1

Atdec TH-WH-PJ-CM Datasheet

Atdec
Brand
Atdec
Model
TH-WH-PJ-CM
Category
Projector mounts
Type
Datasheet
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents