Atdec TH-PS-S Specification

Atdec
Brand
Atdec
Model
TH-PS-S
Category
Projector mounts
Type
Specification
Maximum Weight:
25kg (55lbs)
TH-PS-S
Short Throw Projector Wall Mount | Single Stud
General Features
Dimensions
Tilt Adjustment: Roll Adjustment: Color: Warranty:
ARM
±
5° MOUNT
±
20° MOUNT
±
5° Silver 10 years
C
L
84mm
(3.3”)
160mm
(6.3”)
42mm
(1.7”)
40mm (1.6”)
65mm
(2.6”)
65mm
(2.6”)
100mm
(3.9”)
Ø8.5mm
(0.33”)
119mm
(4.7”)
C
L
855mm (33.7”)
30mm
(1.2”)
144mm
(5.7”)
182mm
(7.2”)
580mm (22.8”)
762mm (30”)
+5°
-5°
C
L
The Support Arm can be
adjusted by +/- 5° to account
for wall slope or individual
projector characteristics.
99mm Max.
(3.9”)
92mm Min.
(3.6”)
Technical Specifications
Dimensions
No portion of this document or any artwork contained herein should be reproduced in any way without the express written consent of Atdec Pty Ltd.
Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. Published 11.01.13 ©
Roll Adjustment:
Tilt Adjustment:
+5°
-5°
+20°
-20°
FRONT VIEW SIDE VIEW
R220mm Max.
(8.7”)
Ø75mm
(3”)
Bolt Circle
Ø6.5mm
(0.25”)
1.5NPT
85mm
(3.3”)
100mm
(4”)
62mm Min.
(2.4”)
69mm Max.
(2.7”)
Ø157.5mm
(6.2”)
Ø100mm (4”)
Bolt Circle
Ø130mm (5”)
Bolt Circle
Ø75mm (3”)
Bolt Circle
Ø5.5mm
(0.2”)
Ø300mm
(12”)
Ø200mm
(8”)
4-LEG MINIMUM DISTANCE:
3-LEG MINIMUM DISTANCE:
Note: Depending on where
the projector is mounted
along the support arm and
if the projector extends from
the centre of the mount
more than 8”/200mm, the
tilt adjustment achievable on
the mount may be reduced.
Technical Specifications
  • Page 1 1
  • Page 2 2

Atdec TH-PS-S Specification

Atdec
Brand
Atdec
Model
TH-PS-S
Category
Projector mounts
Type
Specification
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents