Atdec TH-12-30-MPLUS Datasheet

Atdec
Brand
Atdec
Model
TH-12-30-MPLUS
Category
Mounting kits
Type
Datasheet
152mm
(6”)
133mm
(5
1
/
4
”)
20mm
(
13
/
16
”)
42mm
(1
5
/
8
”)
65mm (2
9
/
16
”)
7mm
(
1
/
4
”)
18kg (39lbs)
Telehook 12-30 Multi is compatible with most LCD and Plasma Flat Panel Displays between
12” (30cm) and 30” (76cm) that use the VESA international mounting standard.
Telehook 12-30 Multi comes with two separate VESA compliant mounting plates. These
Plates accomodate the following mounting hole patterns: - 75mm x 75mm (3” x 3”),
100mm x 100mm (4” x 4”) & 200mm x 100mm (8” x 4”)
Telehook 12-30 Multi is able to be assembled into three different configurations to suit a
wide range of applications. These include an Articulated Arm configuration, a Swing Arm
configuration and a Wall Mount configuration. (Each configuration is able to use either of
the two VESA Display Mounting Plates)
Each unit includes 3 Push-In Clips for cable management.
Silver
All fasteners included
5 year limited
Mounting Options
VESA Display Mounting Plates
75mm
(3”)
75mm (3”)
100mm (4”)
5mm
(
3
/
16
”)
200mm (8”)
Wall Bracket
Technical Specifications
TELEHOOK
12-30 Multi
TM
General Features
100mm
(4”)
6mm
(
1
/
4
”)
100mm
(4”)
100mm (4”)
Maximum Load:
Display Compatibility:
VESA Display Mounting Plates:
Product Configurations:
Cable Management:
Colour:
Fasteners:
Warranty:
• The Wall Bracket can be installed either
horizontally or vertically depending on your
application
• The Wall Bracket can be mounted to either;
- Timber Stud Wall
- Masonry Wall
• Coach Screws and Nylon Anchor Plugs are
included with the product
Overall Dimensions
As TFT Manufacturers are constantly releasing new monitor models, Atdec does not accept responsibility if the VESA mounting does not comply with the international standards.
Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. Published: 01.08.06
c
+/-60° Tilt
71mm
(2
13
/16”)
157mm
(6
3
/16”)
180°
360°
180°
231mm (9
1
/
8
”)
172mm (6
3
/
4
”)
61mm
(2
3
/
8
”)
464mm (18
1
/
4
”)
180°
180°
200mm (8”)
295mm (11
5
/
8
”)
89mm
(3
1
/
2
”)
28mm
(1
1
/
8
”)
Articulated Arm
Wall Mount
Swing Arm
89mm
(3
1
/
2
”)
28mm
(1
1
/
8
”)
Max 20°
44mm
(1
3
/
4
”)
Display Horizontal
Adjustment +/-8°
  • Page 1 1
  • Page 2 2

Atdec TH-12-30-MPLUS Datasheet

Atdec
Brand
Atdec
Model
TH-12-30-MPLUS
Category
Mounting kits
Type
Datasheet
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents