Gibraltar Building Products GR-2FG Operating instructions

GABLE RAKE FLASHING - #GR-2

INSTALLATION GUIDELINES

These installation guidelines are for use with typical or standard applica-

tions. Refer to the detail installation guide for panel and flashing install

details. It is always recommended to seek advice from a licensed profes-

sional, and to check with your local building inspector or building permit

office for approvals and possible variations that may apply.

CAUTION!

Working above grade is inherently dangerous, be sure

that proper fall protection measures are in place.

When working with power tools and sheet metal, gloves

and eye protection are absolutely required.

SM-Rib Panel

Inside Closure

#30 Felt min.

#9 x 1-1/2" ScrewGR-2

Butyl Tape

4 ⁄ in.

11.9 cm

4 ⁄ in.

11.9 cm

1 ⁄ in.

2.7 cm

¾ in.

1.9 cm

1 ⁄ in.

2.7 cm

⁄ in.

9.5 mm

This manual is also suitable for

Download PDF