Delta 4193-AR-DST Specification

Category
Faucets
Type
Specification

This manual is also suitable for

COMPLIES WITH:
ASME A112.18.1 / CSA B125.1
Indicates compliance to
ICC/ANSI A117.1
KITCHEN FAUCETS
Pivotal
Series
Single Handle Highrise Pull-Out
Submitted Model No.: _______________________________________________
Specific Features: __________________________________________________
STANDARD SPECIFICATIONS:
• Max flow rate: 1.8 gpm @ 60 psi, 6.8 L/min @ 414 kPa.
• One or three hole mount (8" escutcheon optional,
not included).
• Diamond coated ceramic cartridge.
• 3/8" O.D. straight, staggered PEX supply tubes.
• Spout rotates 360˚.
• Red/Blue indicator markings.
• Two-function wand; aerated stream or spray.
• Dual integral check valves in sprayer.
• 58" (1473 mm) long hose.
4193--DST
DSP-K-4193-DST Rev. A
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue
models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or
www.deltafaucet.com for finish options and product availability.
8"
(203 mm)
Centers
36 13/16"
(935 mm)
38 5/16"
(973 mm)
9 3/8"
(239 mm)
2 1/8"
(55 mm)
Dia.
3/8" Compression Fitting
9 5/8"
(244 mm)
4 5/8"
(117 mm)
3 7/16"
(86 mm)
3 7/8"
(98 mm)
3 7/8"
(98 mm)
10 3/4"
(273 mm)
2 1/2"
(64 mm)
Max. Deck
Thickness
3/8" Compression Fitting
2 1/2"
(64 mm)
Max. Deck
Thickness
Designate Proper Finish Suffix
Min. 2" (51 mm)
Clearance to Back Splash
3x 1 5/16" - 1 1/2"
(33-38 mm)
Hole Size
1 5/16" - 1 1/2"
(33-38 mm)
Hole Size
55 E. 111th Street, Indianapolis, Indiana 46280
350 South Edgeware Road, St. Thomas, ON N5P 4L1
© 2017 Masco Corporation of Indiana
WARRANTY
Lifetime limited warranty on parts (other than
electronic parts and batteries) and finishes:
or, for commercial users, for 5 years from
date of purchase.
5 year limited warranty on electronic parts
(other than batteries); or, for commercial
users, for 1 year from the date of purchase.
No warranty is provided on batteries.
FEATURES:
• DIAMOND Seal
®
Technology
Touch-Clean
®
Sprayhead
Optional 8"
Escutcheon
RP92233
11"
(279 mm)
9 5/8"
(244 mm)
36 13/16"
(935 mm)
38 5/16"
(973 mm)
9 3/8"
(239 mm)
4 5/8"
(117 mm)
3 7/16"
(86 mm)
11"
(279 mm)
11"
(279 mm)
11"
(279 mm)
• Verified compliant with .25% weighted
average Pb content regulations.
Min. 2" (51 mm)
Clearance to Back Splash
  • Page 1 1

Delta 4193-AR-DST Specification

Category
Faucets
Type
Specification
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI