Delta Faucet 4353-DST Specification

4353-DST
Delta Faucet
Brand
Delta Faucet
Model
4353-DST
Category
Faucets
Type
Specification

This manual is also suitable for

COMPLIES WITH:
•
ASME A112.18.1 / CSA B125.1
Indicates compliance to
ICC/ANSI A117.1
•
Verified compliant with .25% weighted
average Pb content regulations.
KITCHEN FAUCETS
■ Linden™
Series
■ Single Handle Pull-Out
Submitted Model No.: _______________________________________________
Specific Features: __________________________________________________
STANDARD SPECIFICATIONS:
• Max flow rate of 1.5 gpm @ 60 PSI (5.7 L/min @ 414 kPa)
in spray and standard aerated mode
• Max flow rate of 2.2 gpm @ 60 PSI (8.3 L/min @ 414 kPa)
in aerated mode using Multi-Flow™ feature
• One, two, three, or four hole mount (escutcheon included)
• Diamond coated ceramic cartridge
• 3/8" O.D. straight, staggered PEX supply tubes
• Spout rotates 120˚
• Red/blue indicator markings
• Two-function wand; aerated stream or spray
• Dual integral check valves in spout
• Spout is connected to valve body with a 53'' (1346 mm)
long hose
DSP-K-4353-SD-DST Rev. B
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue
models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or
www.deltafaucet.com for finish options and product availability.
55 E. 111th Street, Indianapolis, Indiana 46280
350 South Edgeware Road, St. Thomas, ON N5P 4L1
© 2015 Masco Corporation of Indiana
8"
(203 mm)
Centers
32 1/4"
(819 mm)
33 3/4"
(857 mm)
9 57/64"
(251 mm)
10 27/64"
(265 mm)
11 3/8"
(289 mm)
2 1/2"
(64 mm)
3/8" Compression Fitting
8"
(203 mm)
5 7/8"
(149 mm)
10 1/2"
(267 mm)
2 1/2"
(64 mm)
Max. Deck
Thickness
33 1/4"
(819 mm)
33 3/4"
(857 mm)
3/8" Compression Fitting
9 57/64"
(251 mm)
11 3/8"
(289 mm)
8"
(203 mm)
5 7/8"
(149 mm)
2 1/2"
(64 mm)
Dia.
2 1/2"
(64 mm)
Max. Deck
Thickness
10 27/64"
(265 mm)
3 1/2"
(89 mm)
2 1/4"
(57 mm)
2 1/4"
(57 mm)
2 7/8"
(73 mm)
▲ Designate Proper Finish Suffix
Min. 2 1/2" (64 mm)
Clearance to Back Splash
Min. 2 1/2" (64 mm)
Clearance to Back Splash
4x 1 5/16" - 1 1/2"
(33-38 mm)
Hole Size
2x 1 5/16" - 1 1/2"
(33-38 mm)
Hole Size
4353-SD-DST▲
4353-DST▲
WARRANTY
•
Lifetime limited warranty on parts (other than
electronic parts and batteries) and finishes:
or, for commercial users, for 5 years from
date of purchase.
•
5 year limited warranty on electronic parts
(other than batteries); or, for commercial
users, for 1 year from the date of purchase.
No warranty is provided on batteries.
FEATURES:
• DIAMOND Seal
®
Technology
•
Touch-Clean
®
Sprayhead
• 2-Function Pull-Out w/Multi-Flow™
  • Page 1 1

Delta Faucet 4353-DST Specification

4353-DST
Delta Faucet
Brand
Delta Faucet
Model
4353-DST
Category
Faucets
Type
Specification
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents