Peerless P7919LF-1.0 Specification

Category
Faucets
Type
Specification

This manual is also suitable for

KITCHEN FAUCETS
Single handle
pull-down
P7919LF
p
P7919LF
p
-1.0
2 1/4"
(57 mm)
Max. Deck
Thickness
2 1/4"
(57 mm)
Max. Deck
Thickness
PSP-K-P7919LF Rev E
Min.2 1/2" (64 mm)
Clearance to Back
Splash Recommended
Min.2 1/2" (64 mm)
Clearance to Back
Splash Recommended
COMPLIES WITH:
ASME A112.18.1 / CSA B125.1
Indicates compliance to
ICC/ANSI A117.1
14 11/16"
(373 mm)
14 7/16"
(367 mm)
1/4"
(6 mm)
2 13/16"
(72 mm)
2 13/16"
(72 mm)
4 3/16"
(106 mm)
10 1/8"
(257 mm)
8"
(203 mm)
7 15/16"
(201mm)
26 1/2"
(672 mm)
3 X1 5/16"~1 1/2"
(33~38mm)
Hole Size
1 5/16"~1 1/2"
(33~38mm)
Hole Size
4 3/16"
(106 mm)
Mounting without escutcheon plate
Mounting with escutcheon plate
▲ Designate proper nish sufx
STANDARD SPECIFICATIONS:
• Maximum 1.5 gpm @ 60 psi, 5.7 L/min @ 414 kPa (P7919LFp)
• Maximum 1.0 gpm @ 60 psi, 3.8 L/min @ 414 kPa (P7919LFp-1.0)
• One, two, three, four hole mount options (escutcheon
and soap dispenser optional, sold separately)
• Two-function wand; aerated stream or spray
• Dual integral check valves in sprayer
• Ceramic cartridge
• Spout rotates 360
°
• Red/Blue indicator markings
• Polymer braided flexible supply hose with 3/8” compression
fitting - 27 1/8” (678 mm) long.
27 1/8"
(678 mm)
8 11/16"
(220mm)
8 11/16"
(220mm)
8 1/8"
(207 mm)
3/8" compression tting
3/8" compression tting
3"
(76 mm)
1 15/16"
(50 mm)
10"
(254 mm)
WARRANTY
Parts and Finish - Lifetime limited warranty; or for
commercial purchasers, 10 years for multi-family
residential (apartments and condominiums) and
5 years for all other commercial uses, in each case
from the date of purchase.
  • Page 1 1

Peerless P7919LF-1.0 Specification

Category
Faucets
Type
Specification
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI