PAC BKLTCK588 User manual

BKLTCK588
PAC
Brand
PAC
Model
BKLTCK588
Category
Car kits
Type
User manual

This manual is also suitable for

PAC BKLTCK588 is a car stereo installation kit designed specifically for the 2003-08 Lincoln Town Car. It allows for seamless integration of an aftermarket ISO mount or DIN mount stereo into your vehicle's dashboard. With its custom-crafted brackets and trim rings, you can achieve a factory-like fit and finish, enhancing the overall look and functionality of your car's audio system.

PAC BKLTCK588 is a car stereo installation kit designed specifically for the 2003-08 Lincoln Town Car. It allows for seamless integration of an aftermarket ISO mount or DIN mount stereo into your vehicle's dashboard. With its custom-crafted brackets and trim rings, you can achieve a factory-like fit and finish, enhancing the overall look and functionality of your car's audio system.

Automotive Products Division
1040 Avenida Acaso • Camarillo, CA 93012, U.S.A.
USA Sales (800) 336-6500
Canada Sales (888) 922-3006 • USA Fax (805) 388-7950
For information about other American International automotive
accessories visit our website at:
http://www.americaninternational.net
CUSTOMER HELP LINE
USA 800-323-4329 • Canada 800-245-8777
©2008 AMERICAN INTERNATIONAL INDUSTRIES, INC.
Ver. 6/09
LTC-K588 Mounting Kit
Lincoln
2003-08 TOWN CAR
VEHICLE APPLICATIONS
DASH DISASSEMBLY INSTRUCTIONS
1. Set the emergency brake.
2. Remove the (2) 9/32 screws located above the instrument gauges.
3. Lower the steering column all the way down.
4. Place key in ignition and turn to the on position (DO NOT START CAR)!
5. Carefully pry outward on the entire dash trim bezel.
6. Disconnect the wire harnesses from the rear of the trim bezel’s switches and remove
the bezel.
7. Remove the (2) 9/32 screws securing the factory clock to the sub-dash, pry clock
forward, disconnect the wire harness and remove clock.
8. Remove the (4) 9/32 screws securing the factory radio to the sub-dash.
9. Pull the radio forward, disconnect the wire harnesses and antenna lead and
remove radio.
ISO MOUNT INSTALLATION INSTRUCTIONS
1. Attach ISO brackets to the rear of the main mounting kit (see illustration above).
2. Slide radio into kit from rear & attach to ISO mounting brackets using screws supplied
with radio (do not tighten screws at this time).
3. Slide radio forward or backward for your desired look and then tighten the mounting
screws. Use ISO trim ring when possible.
4. Attach rear support strap (supplied with radio) to rear of pocket and to rear of radio.
1. Insert DIN sleeve from your new radio into the radio opening of the installation kit.
2. Depress the tabs from inside the sleeves opening upward, outward, and downward
to secure sleeve to the installation kit.
DIN MOUNT INSTALLATION INSTRUCTIONS
2 3
DIN Sleeve
ITR 588
Trim Ring
(Optional Use)
2003-09 LINCOLN TOWN CAR
ITR 588
Trim Ring
(Optional Use)
  • Page 1 1
  • Page 2 2

PAC BKLTCK588 User manual

BKLTCK588
PAC
Brand
PAC
Model
BKLTCK588
Category
Car kits
Type
User manual
This manual is also suitable for

PAC BKLTCK588 is a car stereo installation kit designed specifically for the 2003-08 Lincoln Town Car. It allows for seamless integration of an aftermarket ISO mount or DIN mount stereo into your vehicle's dashboard. With its custom-crafted brackets and trim rings, you can achieve a factory-like fit and finish, enhancing the overall look and functionality of your car's audio system.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents