Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to insure that all
components are in proper position, tight and free from damage. Keep this assembly instruction for future reference. Adult assembly is required.
The product of Hillsdale Furniture, LLC is designed for residential use only. Customer Service Phone Number: 502-562-0000
Date: 11-20-2014
Page 1 of 1
VENUS BARSTOOL
Model #4210-824H / 825H / 826H / 827H / 831H
STEP 1
Begin assembly by turning Seat Base (G) upside
down and attaching Stool Stand (I) to the bottom with
4 Allen Bolts (B), 4 Spring Washers (D) and 4 Flat
Washers (C) to secure in place. Tighten all bolts using
Allen Wrench (E) provided.
STEP 2
Next attach Stool Top (F) to Seat Base (G) by
inserting each post in place and securing from
the bottom with 1 Allen Bolt (A), 1 Spring
Washer (D) and 1 Flat Washer (C) per side and
3 Allen Bolts (A), 3 Spring Washers (D) and 3
Flat Washers (C) in the middle. Tighten all
bolts.
STEP 3 - Figure 1
Attach Foot Rest (J) to Stool Stand (I) using 3
Allen Bolts (B), 3 Spring Washers (D) and 3
Flat Washers (C). Tighten all bolts.
STEP 4
Attach the Gas Lift (K) to Stool Base (H).
Finally, attach Stool Base (H) and Gas Lift (K)
to Stool Stand (I) by inserting in place. The
assembly is now complete.
HARDWARE LIST
A (5) 1/4” x 1” Allen Bolts
B (7) 1/4” x 5/8” Allen Bolts
C (12) Flat Washers
D (12) Spring Washers
E (1) Allen Wrench
PARTS LIST
F (1) Stool Top
G (1) Seat Base
H (1) Stool Base
I (1) Stool Stand
J (1) Foot Rest
K (1) Gas Lift
CARE & MAINTENANCE
:
The touch of a soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing,
as they may cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely tightened.
QTYPART
12D
1E
12C
7B
5A
HARDWARE
AA
A
A
B
B
B
B
B
B
B
B
C
C
C
C
C
C
C
C
C
C
C
C
D
D
D
D
D
D
DD
D
D
D
D
F
J
K
G
H
I
FIGURE 1
/
