Astonica Athens User manual

Brand: Astonica

Model: Athens

Type: User manual

This manual is also suitable for

40200112

Astonica Athens is a two-tier fountain designed for residential use. It comes with an electric pump that circulates water, creating a soothing and relaxing ambiance. The fountain is easy to assemble and maintain, with adjustable water flow to customize the desired effect. Its durable construction and weather resistance make it suitable for both indoor and outdoor use.

Model No. 40200112

Athens Two Tier Fountain

Instruction Manual

231012rev1

Read the instructions and precautions before use of this product

Please keep this instruction manual for future reference

For warranty information, please refer to the back page of

this instruction manual.

Due to ongoing product development

the actual product or products may vary from

the illustrations or photos shown within this manual.

NOTE: This product is intended for residential, non-commercial use.

Made in China

Distributed by:

World Factory, Inc.

Westlake, TX 76262

For Manuals, Replacement Parts or Customer Service visit:

www.ezreplacement.com

Limited Warranty

World Factory, Inc. Products for Home Use

World Factory, Inc. (Seller) warrants to the original Buyer only, that each Astonica Product will be free

from defects in material and workmanship for a period of one (1) year from date of purchase.

SELLER’S SOLE OBLIGATION AND BUYER’S EXCLUSIVE REMEDY UNDER THIS LIMITED

WARRANTY SHALL BE THE REPAIR OR REPLACEMENT OF PARTS, WITHOUT CHARGE, WHICH

ARE DEFECTIVE IN MATERIAL OR WORKMANSHIP. ANY PARTS AS DETERMINED BY THE SELLER

WHICH HAVE BEEN MISUSED; ABUSED OR DAMAGED EITHER DIRECTLY OR INDIRECTLY FROM

REPAIRS OR ALTERATIONS ATTEMPTED BY UNAUTHORIZED PERSONS; IMPROPER

MAINTENANCE, NEGLECT OR ACCIDENT ARE NOT COVERED BY THIS LIMITED WARRANTY. This

warranty does not apply to damage, heat-induced coloration changes, scratching or alteration due to

normal use or weathering. To make a claim under this Limited Warranty, you must return the complete

product with proof of purchase, transportation prepaid, to any World Factory, Inc. authorized service

center. Call 1-888-422-7800 or visit: ezreplacement.com for the location of the nearest authorized

service center.

Additional Limitations

THIS LIMITED WARRANTY DOES NOT APPLY TO ACCESSORY OR CONSUMABLE ITEMS RELATED

TO THIS PRODUCT. ALL IMPLIED WARRANTIES SHALL BE LIMITED IN DURATION TO ONE (1)

YEAR FROM DATE OF PURCHASE. IN NO EVENT SHALL SELLER BE LIABLE FOR ANY INCIDENTAL

OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO LIABILITY FOR LOSS OF

PROFITS, ARISING FROM THE SALE OR USE OF THIS PRODUCT.

If any provision of this Limited Warranty is for any reason held to be invalid or unenforceable, such

provision shall not affect any other provision herein, this Limited Warranty shall be construed as if

such invalid and/or unenforceable provision had never been contained herein.

This warranty gives you special legal rights, and you may also have other rights which vary from state

to state.

This Warranty contains the entire agreement between Seller and Buyer and supersedes any and all

prior agreements, arrangements, or understandings between the parties relating to product warranty.

WARNING! ELECTRICAL SHOCK. Read and understand all instructions. Failure to follow all

instructions listed below, may result in electrical shock, ﬁre and/or serious personal injury.

SAVE THESE INSTRUCTIONS.

Grounding Instructions

This fountain must be plugged into a 3-wire, 3-prong outlet that is properly working and has

been installed and grounded in accordance with all local, state or federal codes and ordinances.

DANGER: IMPROPER INSTALLATION OF THE GROUNDING PLUG CAN RESULT IN A RISK OF

ELECTRICAL SHOCK. Check with a qualiﬁed electrician or serviceman if the grounding instructions

are not completely understood, or if doubt as to weather the product is properly grounded. Do not

modify the plug provided; if it will not ﬁt the outlet, have a proper outlet installed by a qualiﬁed

electrician. Do not use any type of adapter with this product.

Adjust Speed of Water Flow

1. Unplug pump (E) from AC power outlet.

2. Move adjustment switch on pump (E)

toward "+" positive to increase water

ﬂow, or "-" to decrease water ﬂow.

Maintenance

1. Check water level periodically, add

water if necessary.

NOTE: Pump may build up calcium after a

long period of time and stop running when

tap water is used. Any calcium remover can

be used to clean pump.

ELECTRICAL SAFETY INSTRUCTIONS

Grounded

Outlets

AMP Load Volts Extension Cord Length

120V 25' 50' 100' 150'

AWG

1-5 18 16 16 14

6-10 18 16 14 12

10-12 14 14 14 12

12-16 14 12

Not recommended

Table 1. Minimum Recommended Extension Cord Gauge (AWG) Chart

Outdoor Use Extension Cords.

1. When product is used outdoors, use only extension cords marked for outdoor use.

2. Use only UL listed extension cords. Never use damaged or altered extension cords.

3. Follow extension cord manufacturer safety instruction.

Extension Cords

1. Make sure your extension cord is in good condition.

2. When using extension cords, be sure to use one heavy enough to carry the current your product

requires. An undersized cord will cause a drop in line voltage resulting in power loss and

overheating. Reference Table 1 at the bottom of the page for the correct size to use depending

on cord length and nameplate Ampere rating. If in doubt, use the next heavier gage. The smaller

the gage number, the heavier the cord.

Figure 3

Figure 4

3. (SEE FIGURE 3) Insert the PVC tube from top

basin (D) through center pedestal (C) and onto

the spout of the electric pump (E).

4. Then align the tabs of top basin (D) with

notches of center pedestal (C) and secure

by twisting.

5. (SEE FIGURE 4) Fill the large basin (B) with

water; if possible use distilled water to

ﬁll the basin.

6. Plug power cord of pump (E) into properly

grounded 120V AC outlet. Allow a few minutes

for the water to begin ﬂowing.

ASSEMBLY INSTRUCTIONS

NOTE: Tabs and notches on fountain parts are

different sizes, so they must match up

correctly to secure.

1. (SEE FIGURE 1) Place the base pedestal (A) on

ﬂat, level surface. Put the large basin (B) on the

base pedestal (A) aligning the tabs of the basin

with the notches in the top of the base. Turn the

large basin counter clockwise to lock into place.

Put the electric pump (E) into the center ring in

the bottom of large basin (B) beside the PVC

tube. Place the power cord of the pump (E)

through the PVC tube, the pedestal base (A)

and out the bottom of the base as shown.

A Base Pedestal 1

B Large Basin 1

C Center Pedestal 1

D Top Basin 1

E Electric Pump 1

PARTS & HARDWARE LIST

PART #

DESCRIPTION QUANTITY

Carefully remove the contents from the package. If any parts are missing do not

attempt to use the product until they have been obtained and correctly installed.

Parts Detail

2. (SEE FIGURE 2) Connect center pedestal (C) to

large basin (B) by aligning the tab of the large

basin with the notch in the bottom of the

center pedestal.

Figure 1

Figure 2

Basin Tab

Base Notch

Power Cord

Basin

Tab

NOTE: This product is intended for residential, non-commercial use.

Astonica Athens User manual

Brand: Astonica

Model: Athens

Type: User manual

This manual is also suitable for

40200112

Download PDF

report

Astonica Athens User manual

This manual is also suitable for

Astonica Athens User manual

Related papers

Other documents