1
Simple. Modern. American Made.
QUARK ENTERPRISES, LLC PO BOX 1123, PROVO, UT 84601 MODEL NO. MKA-CABINET DOCUMENT: AI-MKA-CABINET WWW.SPROUT-KIDS.COM COPYRIGHT QUARK ENTERPRISES 2022
Right Side
Left Side
(2) Top / Bottom
Shelves
(identical)
Adult assembly only
Assemble completely
before use
Insert Top Shelf c into slots on Left Side a , with
the grooves facing inward, and not next to the
tabs for the slotboard.
2Tighten shelf c by pushing down until back edge
of shelf is ush with back edge of Left Side a .
3Repeat Steps 1 & 2 with the Bottom Shelf c ,
making sure that the grooves are facing inward,
and line up with grooves on Top Shelf c .
4Lay cabinet on its back, as shown. Then slide in two
Doors d in the desired orientation, with a handle on
the left & a handle on the right.
5Carefully t slots on Right Side b over tabs on Shelves
c . Ensure that the tab for the slotboard is on the
same corner as Left Side a .
6Holding the sides together, carefully pick up the unit
and set on its front, in the orientation shown. Press
shelves c down until ush with back edge.
(2) Doors
D
D
D
D
ASSEMBLY INSTRUCTIONSPARTS
Frustrated?
Need Help?
STOP
Talk to our customer
service agent at:
+1 (833) 530-0033
Sliding Door
Cabinet
A
A
A
A
A
A
A
A
B
B
B
B
C
C
C
C
C
C
C
C
C
C
C
C
C
CC
7Position on the
slotboard as desired.
To remove from
slotboard, pull up
rmly to pop out
bottom tab.
GROOVES NOT NEXT TO
TAB FOR SLOTBOARD
TABS FOR SLOTBOARD
ON THE SAME CORNER
POP IN
BOTTOM TAB
GROOVES
HANDLE
GROOVES MUST
FACE INWARD HANDLE
ON LEFT
HANDLE
ON RIGHT
HOLD SHELVES
TOGETHER
GROOVES MUST
FACE INWARD