2. Quoizel
  3. WVR8209EK

Quoizel WVR8209EK User manual

  • I've reviewed the user manual for the Quoizel WVR8209EK light fixture. This document contains detailed instructions on how to safely install and maintain the fixture, as well as how to replace the glass panels and bulbs. I'm ready to answer your questions about the device described in the manual, so please, do not hesitate to ask.
  • What should I do before starting the installation?
    What kind of bulbs should I use?
    What is the recommended bulb type?
    How to clean the fixture?
    What should be avoided to damage a fixture?
-of-13
INSTALLATION GUIDE FOR WVR8209EK
CARE AND MAINTENANCE
SAFETY INFORMATION Released Date: 202 -3 02-03
• Wipe clean using soft, dry cloth or static duster. Always avoid using harsh chemicals and abrasives to clean fixture as they may damage
the finish.
If you need further assistance call Quoizel Customer Care at 1-800-645-3184 (9:00am - 5:00pm EST), or visit us on-line at
www.quoizel.com.
Please read and understand this entire manual before attempting to assemble, install or operate the product.
WARNING
• RISK OF ELECTRIC SHOCK - Before beginning installation, turn off electricity at the circuit breaker box or the main fuse box.
• RISK OF FIRE - Use bulbs specified by the markings and/or labels on the fixture.
CAUTION
• For your safety, read instructions completely before beginning installation.
• If in doubt about electrical installation, consult a licensed electrician.
• Turn off electricity to fixture before replacing the bulb(s).
TOOLS REQUIRED
PACKAGE CONTENTS
Inner Backplate
x1
AA
Wire Connector
x3
CC
Outlet Box Screw
x2
DD
AFixture Body
x 1
MOUNTING HARDWARE
Mounting Screw
x4
BB
Screw
x4
FF
Wall Anchor
x4
EE
BGlass panel
x4
DCurved Plate
x4
Lock Screw
x8
C
ECandle cover
x4
-of-23
INSTALLATION
3
Install Inner Backplate
4
Wiring
White wire from supply White from fixture
Black (or red) wire from supply Black from fixture
Ground wire from supply
Ground wire
from fixture
Green ground screw
5
Install Lanyard and Fixture Body
2
Install Glass Panels
Lanyard
Lanyard
Outlet Box
1
Install Candle Cover and Bulbs
Install four correct bulbs referring to
fixture markings and/or labels for
maximum wattage.
Recommended Bulb Type (not
included):
BULB BASE TYPE
Candelabra (E12)
BULB SHAPE
TYPE B
60W
The beveled is
outside.
ECxterior aulk
ECxterior aulk
ECxterior aulk
6
Apply Caulking
* Note: Do NOT caulk the bottom of the backplate to
allow moisture to escape.
Your installation is now complete! Restore electricity and save this sheet for future reference.
Advise two People
install.
-of-33
1
Remove Curved Plate
2
Remove Glass Panel and Bulb
Reverse above steps to reinstall the replacement Glass onto fixture.panels
HOW TO REPLACE GLASS Panel and Bulb
/