2. Computers & electronics
  3. TVs & monitors
  4. Flat panel floor stands
  5. Vision
  6. VFM-F31

Vision VFM-F31 User manual

  • Hello! I've reviewed the product details for the Vision VFM-F31 Flat Panel Floor Stand. This stand is designed for large displays and boasts a heavy-duty construction with adjustable height and wall brackets. It also features cable management and optional shelves. I'm ready to answer any questions you might have about its capabilities and setup.
  • What is the maximum display size supported by the VFM-F31?
    What is the maximum weight the floor stand can handle?
    Is it possible to adjust the height of the display?
    Does the VFM-F31 come assembled?
VFM-F31 Flat Panel Floor Stand
vav.link/vfm-f31 VFM-F31 EU SAP: 5790717
800 mm (31.5") manual height adjustment
Comes 95% assembled
Fits Large-format at panels 37-90″
- subject to VESA pattern and weight limit
VESA 800 (wide) x 600 mm (tall)
- alternative versions available
SWL (safe working load) 130 kg (286 lb)
The VFM-F31 is a heavy-dutyoor stand designed for
medium to very large displays. It is the F30 without a motor.
This premium mount is rigid with a slim design which helps
it blend in instead of dominating a room - essential for high
quality boardroom and meeting space decor.
Vision take great care to produce products which help
installers do a high quality job fast, so the F31 comes
almost fully assembled. Just take it out of the box, attach
the at-panel mount, and x it to the wall. Done! Vision's
oor stands transmit the load of the heavy display safely to
the oor.
Components included:
Heavy Duty
The F31 uses heavy-gauge components to take a safe working
load (SWL) of up to 130kg (286 lbs).
For 37-90" Displays
Fits most displays from 37-90″ subject to VESA pattern and weight
limit. Note: curved screens are not supported by this mount.
800 mm / 31.5" Height Adjustment
The columns move up and down with 800 mm / 31.5" of range.
With no pinch-points this is a very safe design.
Telescopic Columns
The tight tolerance of the telescopic legs results in no unwanted
wobble at the screen.
Very Tall for Exhibition and Rental
This oor stand is slightly taller than the motorised F30; at the
highest position the centre of the display is 1912 mm (75.3") high.
This height advantage makes it ideal for rental and staging
applications.
Adjustable Reach Wall Brackets
A pair of brackets x the column to the wall at multiple height
positions. A short set and a long set are included, and the distance
between the back of the column to the wall can be 38-133 mm
(1.5-5.2") off the wall.
Meets ADA Regulations
The thin design holds the display close to the wall. This looks
better, reduces snagging risk, and because the load is close to the
wall the mount has a higher safe working load rating.
Floor Anchor
Two options are included for oor termination; a plate which can
be bolted to the oor, or adjustable feet so installers can adjust the
plumb-level. Both are included with the oor stand.
Cable Management
Cable clamps keep the cables tidy.
Media Player Fixing
Media players can be xed to the wall bracket assembly out of
sight. The wall bracket has VESA 100 holes especially for this.
END OF LIFE FEBRUARY 2022
SPECIFICATIONS
VFM-F31 Flat Panel Floor Stand
VESA 800 x 600
This product includes Vision’s heavy-dutyVFM-W8X6 wall mount
which ts most large-format at panels from 37-90″. Vision’s
larger VFM-W10X6wall bracket can also x to this column, or the
smallerVFM-W6X4andVFM-W4X4.
Optional Laptop Shelf
An optional shelf xes at four different heights in 80 mm (3.1")
increments to the horizontal part of the wall mount. The platform
is 450 mm (17.7") wide by 306 mm (12.0") deep. At the lowest
height setting the shelf is 680 mm (26.8") below the centre of
screen.
Part Number: VFM-WLS [EU SAP: 4857149 / US SAP:
13557610]
Optional Video Conference Shelf
This shelf xes in the centre above or below the display. It
accommodates cameras such as Logitech's Rally, and also
Logitech's Meetup, Yamaha’s YVC-1000, or Barco’s Clickshare CSE-
200 base stations. With VESA100 holes on the vertical section,
products like iPad enclosures can be xed above or below the
display.
Part Number: VFM-WVC [EU SAP: 5048878 / US SAP:
13557673]
Display Secured
The display latches into place on the oor stand. It cannot slide off
and screws can be added from behind to completely lock it in
place.
WHAT YOU GET
1 x VFM-F31FRAME 1 x VFM-W8X6
PRODUCT DIMENSIONS
VFM-F31FRAME: See CAD VFM-W8X6: 845 x 635 x 36 mm / 33.3″ x
25.0″ x 1.4″ (width x height x depth)
PACKAGED DIMENSIONS
VFM-F31FRAME: 1280 x 540 x 160 mm / 50.4” x 21.3” x 6.3” VFM-
W8X6: 880 x 235 x 40 mm / 34.6″ x 9.3″ x 1.6″
PRODUCT WEIGHT
VFM-F31FRAME: 18.2 kg / 40.12 lbs VFM-W8X6: 5.8 kg / 12.9 lbs
Total: 24.0 kg / 52.9 lbs
PACKAGED WEIGHT
VFM-F31FRAME: 22.3 kg / 49.2 lbs VFM-W8X6: 6.8 kg / 15.0 lbs
Total: 29.1 kg / 64.2 lbs
SAFE WORKING LOAD
130 kg / 286 lbs
CONSTRUCTION MATERIAL
Steel
COLOUR
Powdercoated Matt Black
VESA SIZES
800 x 600 mm 800 x 500 mm 800 x 400 mm 600 × 600 mm 600 x
500 mm 600 × 400 mm 500 x 500 mm 500 x 400 mm 400 x 600
mm 400 × 400 mm 400 x 300 mm 400 × 200 mm 300 × 400 mm
300 × 300 mm
HEIGHT ADJUSTMENT RANGE
800 mm / 31.5"
ACCESSORIES INCLUDED
WITH VFM-F31FRAME 4 x Wall Brackets WITH VFM-W8X6 4 x M5
16 mm screw 4 x M6 16 mm screw 4 x M6 25 mm screw 4 x M8 16
mm screw 4 x M8 35 mm screw 2 x M8 45 mm screw
WARRANTY
Lifetime return-to-base
COMPLIANCES
RoHS, WEEE ADA Compliant (Americans with Disability Act)
OPTIONAL ADD-ONS
VFM-WLS Laptop Shelf [EU SAP: 4857149 / US SAP: 13557610]
VFM-WVC Video Conferencing Shelf [EU SAP: 5048878 / US SAP:
13557673]
ALTERNATIVE KITS
VFM-F31/4X4 [EU SAP: tba] VFM-F31/4X6 [EU SAP: tba] VFM-
F31/6X4 [EU SAP: tba] VFM-F31/10X6 [EU SAP: tba] VFM-
F31FRAME [EU SAP: 5421211]
/