Atdec TH-2050-VFM User guide

TH-2050-VFM
Atdec
Brand
Atdec
Model
TH-2050-VFM
Category
Flat panel wall mounts
Type
User guide

Atdec TH-2050-VFM is a full motion mount for displays up to 35kg, offering a wide range of movement with its 3 pivot points and Smooth Glide™ technology. It features a detachable mounting head for easy installation and maintenance, advanced cable management, and all necessary hardware for masonry and timber stud installation. With adjustable pan, tilt, and horizontal adjustment, it allows for optimal viewing angles in both landscape and portrait orientations.

Atdec TH-2050-VFM is a full motion mount for displays up to 35kg, offering a wide range of movement with its 3 pivot points and Smooth Glide™ technology. It features a detachable mounting head for easy installation and maintenance, advanced cable management, and all necessary hardware for masonry and timber stud installation. With adjustable pan, tilt, and horizontal adjustment, it allows for optimal viewing angles in both landscape and portrait orientations.

Product key features:
Atdec Global www.atdec.com.au
Atdec North America www.atdec.com
TH-2050-VFM
Full Motion | Medium articulated arm
Mounting hole pattern:
from 100mm to 400mm wide
from 100mm to 400mm high
Maximum weight carrying capacity:
35kg (77lbs)
pantone 2915 C
cmyk 49,11,0,0 cmyk 0,0,0,100
Provides full range of movement via 3 pivot points
Smooth Glide™ technology for effortless movement
Detachable mounting head for easy installation and maintenance
Advanced cable management
The
TH-2050-VFM
is
a
cutting-edge
full
motion
mount
with
incredible versatility. User friendly features are at the heart of the
design, with Smooth Glide™ technology to effortlessly move any
display up to 35kg (77lbs). The strong articulated arms
allow
the screen to be pulled out from the wall and turned for any
viewing position. The VESA mounting hole plate ensures this die
cast aluminium mount is compatible with a vast range of displays.
It comes pre-assembled, with a design that guarantees quick and
easy installation. The quick attachment/quick release mechanism
allows
you
to
install
and
detach
your
display
in
seconds.
All mounting hardware for masonry and timber stud installation included
Display can be installed in
Landscape or Portrait orientation
Minimum display distance from wall:
100mm (3.94”)
Maximum arm reach:
540mm (21.26”)
Adjustable tilt:
20° down and 5° up
Adjustable pan (at mounting head):
90° left and 90° right
Horizontal adjustment at the mounting head
5° on each side
Detachable mounting
head with security screw
to deter unauthorised
removal
Maximum Weight:
70kg (154lbs)
Screen Mounting Compatibility:
From minimum 200mm wide x 200mm high to maximum 800mm wide x 400mm high.
Tilt Adjustment: Color: Warranty:
+ 15° Black 10 years
- 15°
Technical Specification
TH-3070-UTP
Flat Screen Portrait Wall Mount | Tilt
General Features
Dimensions
+15°
-15°
200-400mm
(7.9-15.7”)
200mm
(7.9”)
810mm
(31.9”)
832mm
(32.8”)
130mm
(5”)
Maximum Weight:
70kg (154lbs)
Screen Mounting Compatibility:
From minimum 200mm wide x 200mm high to maximum 800mm wide x 400mm high.
Tilt Adjustment: Color: Warranty:
+ 15° Black 10 years
- 15°
General Features
Dimensions
No portion of this document or any artwork contained herein should be reproduced in any way without the express written consent of Atdec Pty Ltd.
Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. Published 25.01.13 ©
Wall Mounting:
Screen Mounting:
200-400mm
(7.9-15.7”)
200mm
(7.9”)
810mm
(31.9”)
832mm
(32.8”)
455mm
(17.9”)
421mm
(16.6”)
82mm
(3.2”)
223mm
(8.8”)
165mm
(6.5”)
109mm
(4.3”)
17mm
(0.7”)
63mm
(2.5”)
30.5mm
(1.2”)
8.5mm
(0.3”)
8.5mm
(0.3”)
Atdec Global www.atdec.com.au
Atdec North America www.atdec.com
Product information
Package information, single unit
Package information, master pack
Product Code
TH-2050-VFM
36cm x 35cm x 13cm
(14.25” x 14” x 5”)
38cm x 38cm x 54cm
(15” x 15” x 21.25”)
35kg (77lbs)
5.48kg (12.2lbs)
22.76kg (50.6lbs)
Die Cast Aluminium/Steel
881493004733
881493004689
Matt silver with black trim
All hardware required for
installation supplied
4
Load capacity
Size
Size
Ship weight
Ship weight
Material
UPC code
UPC code
Colour
Contents
Units per master pack
Atdec mounts are designed, developed and tested in Australia. While all efforts
have been made to ensure the information in this brochure was correct as of the
date of printing, we reserve the right to change specifications without notice. Please
refer to the website for our full range along with the latest details on specifications,
compatibility and dealer location. Atdec and Telehook are registered trademarks
with all rights reserved. Copyright May 2013.
Technical drawings
pantone 165 C
cmyk 0,59,96,0
pantone 186 PC
cmyk 0,100,75,4
pantone 2915 C
cmyk 49,11,0,0
cmyk 0,0,0,100
cmyk 0,0,0,100
cmyk 0,0,0,100
190°
360°
180°
240mm
(9.45”)
194mm (7.64”)
Articulated Arm Range of Movement
Distance from Wall
Min.
100mm
(3.94”)
Max.
540mm
(21.26”)
Max. display
width at 90°
900mm
(35.43”)
50mm
(2”)
offset from centre
Side View
-5°
+20°
  • Page 1 1
  • Page 2 2

Atdec TH-2050-VFM User guide

TH-2050-VFM
Atdec
Brand
Atdec
Model
TH-2050-VFM
Category
Flat panel wall mounts
Type
User guide

Atdec TH-2050-VFM is a full motion mount for displays up to 35kg, offering a wide range of movement with its 3 pivot points and Smooth Glide™ technology. It features a detachable mounting head for easy installation and maintenance, advanced cable management, and all necessary hardware for masonry and timber stud installation. With adjustable pan, tilt, and horizontal adjustment, it allows for optimal viewing angles in both landscape and portrait orientations.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents