2. SEWOO
  3. LK-P20ll
LK-P20ll

SEWOO LK-P20ll User manual

  • Hello! I've reviewed the user manual for the LK-P20ll printer. This document includes instructions for firmware updates, font downloads, and recovery mode procedures. I'm ready to answer any questions you have about these topics or anything else related to the manual content.
  • How do I download printer firmware?
    How do I download fonts?
    How to download Bluetooth firmware for MOVON 4.2?
    How do I enter recovery mode?
28-6, Gajangsaneopdong-ro,
Osan-si, Gyeonggi- do, 18103, Republic of Korea
TEL : +82-31-8077-5000 / FAX : +82-31-624-5310
http://www.miniprinter.com
The manual and product are protected by copyright.
Aroot Co., Ltd.
Rev.C 04 / 2020
- LK-P20ll -
F/W DOWNLOAD MANUAL
INDEX
1. Download Printer Firmware 2
2. Download Fonts 4
3. Download Bluetooth (or Wi-Fi) Firmware 6
4. Download ICR Firmware 12
5. Recovery Mode 14
2
1. Download Printer Firmware
01 Execute the program “FW Download Program.exe”.
02 Select Model “LK-P20N”.
03 Choose the rom le after clicking “FILE OPEN” button.
04 Click the button “Printer F/W”.
3
05 When the following message shows up ,click “Yes” button
06 The Buzzer will sound soon and the power will turn o.
4
2. Download Fonts
01 Execute the program “FW Download Program.exe”.
02 Select Model “LK- P20N”.
03 Choose the font le after clicking “FILE OPEN” button.
04 Click the button “Ext’ Font”.
5
05 When the following message shows up ,click “Yes” button.
06 The Buzzer will sound soon and the power will turn o.
6
3. Download Bluetooth (or Wi-Fi) Firmware
3-1 Wi-Fi or Bluetooth BLUE GIGA
006b0f319250
01 You can see Bluetooth(or Wi-Fi) version on “Self Test” If the version is lower
than yours, do update.
02 Execute the program “FW Download Program.exe”.
03 Select Model “LK- P20N”.
7
04 Choose the rom le after clicking “FILE OPEN” button.
05 Click the button “BT(or Wi-Fi) F/W”.
06 When the following message shows up ,click “Yes” button.
8
3-2 Bluetooth MOVON 4.2
00137B3A8F04
01
Execute the program “Conguration Tool.exe”.
02 Refer to “Conguration Tool Manual” and set BLE “Enable”.
03 Run Bluetooth in your android phone.
04 Link “ MOVON BLE Device ” in your android phone.
05 Download and Install OTA_Android.
06 Run LE OTA .
07 Tab to select a device and select “MOVON_BLE”.
9
08 Click “Connect” and “Tab to select OTA image”.
10
09 Select OTA image le to use, then press Update button.
10 You can see “Success”.
11
12
4. Download ICR Firmware
01 Execute the program “FW Download Program.exe”.
02 Select Model “LK-P20N”.
03 Choose the rom le after clicking “FILE OPEN” button.
04 Click the button “ICR F/W”.
13
05 When the following message shows up ,click “Yes” button
06 The Buzzer will sound soon and the power will turn o.
14
5. Recovery Mode
01 Cover open the printer.
02 Press Feed and Power button to enter recovery mode
03 If battery led blinks, release button.
04 Execute the program “FW Download Program.exe”.
05 Select Model “LK- P20N”.
06 Choose the rom le after clicking “FILE OPEN” button.
15
07 Click the button “Printer F/W”.
08 When the following message shows up ,click “Yes” button.
09 The Buzzer will sound soon and the power will turn o.
/