Xtream S6

Adesso Xtream S6 User guide

  • Hello! I've reviewed the Quick Guide for the Adesso Xtream S6 Wireless Sound Bar. This document details the soundbar's features, including Bluetooth 5.0 connectivity, bass subwoofer sound, and its compact design. It also outlines how to connect via Bluetooth, AUX, and RCA, along with charging instructions. I'm ready to answer your questions about the Xtream S6.
  • What is the Bluetooth name for this soundbar?
    What is the default password if prompted for Bluetooth pairing?
    How do I charge the soundbar?
    What does the Red indicator light indicate when charging?
123
6
5
4
Introduction
Limited Warranty
Adesso provides a one year limited warranty for all of its products against defects in
material and workmanship.
During this period, Adesso will repair or replace any product which proves to be defec-
tive. However, Adesso will not warranty any product which has been subject to improper
freight handling, shipping abuse, neglect, improper installation or unauthorized repair.
The warranty will not cover products installed with components not approved by Adesso
and products where the sealed assembly trace has been broken.
If you discover a defect, Adesso will, at its option, repair or replace the product at no
charge to you provided you return it during the warranty period with freight charges
pre-paid to Adesso. Before returning any product, you must obtain a Return Merchan-
dise Authorization number (RMA). This RMA # must be clearly marked on the outside
of the package you are returning for warranty service. Be certain to also include your
name, shipping address (no PO Boxes), telephone number, and a copy of the invoice
showing proof of purchase in the package.
Contents Getting Started
Product Overview
Specifications
A
Wireless Speakers
POWER ON/OFF VOLUME
VOLUME +/-
TURN LEFT, NEXT TURN
SHORT PRESS PAUSE/PLAY
TURN RIGHT, LAST TURN
LED INDICATOR
3.5mm AUX INPUT DC5V POWER
USB
TF
QuickGuide
English
www.adesso.com
Xtream S6
Portable Bluetooth 5.0
Wireless Sound Bar
®
Connectivity
Power Source
Output Power
Built-in Rechargeable Battery
Battery Capacity
Charging Time
Built-in Mic
Impedance
Frequency Response
Product Size
Weight
Cable Length
Bluetooth 5.0, AUX
USB 5V
10W*2
Yes
Lithium 2000mAh
2 hrs
Yes
4 ohm
160hz-18khz
16.96(L) x 2.36 (W) x 2.36(H) In
380(L) x 60 (W) x 60(H) mm
1.54 lbs (0.7kg)
6 ft (1.8M)
B
AUX Cable
C
USB Cable
D
Quick Start Guide
Support
FAQ’s: http://www.adesso.com/faqs
Email Support: [email protected]
Telephone Support:
Toll Free: (800) 795-6788
9:00AM to 5:00PM PST Monday - Friday
More Language
The Adesso Xtream S6 features Bluetooth 5.0 wireless audio to go along
with Bass Subwoofer sound technology. with (L/R) Left and Right for high
quality stereo sound. With an all metal body and compact design, you can
carry this soundbar anywhere you go to connect to a laptop, notebook,
tablet, or computer. Eective Range is up to 164 feet (50M).
1. Bluetooth Mode
A. Rotate the volume knob to turn on the speaker, then the blue light
indicator ashes.
B. Search for the bluetooth speaker name “Xtream S6” , then it will
connect and pair automatically. If there is password needed.
Simply enter “0000”. Once the device is connected successfully, it
will be automatically paired when re-use next time.
2. Aux Mode
A. Connect the device with 3.5mm aux cable and the speaker will
enter into the AUX mode with voice prompts.
B. The blue color indicator light is on AUX mode.
4. Charging Mode
A. Charge the speaker with the charging cable. ( Wall charger is also
available as long as it is 5V adapter).
B. The Red Color indicator light is on when it is on charging mode,
and the light is o when fully charged.
3. RCA Mode
A. Plug the red and white color cable into the TV/Projector or any
other devices’ corresponding position (The white cable plugs into
the red hole position), the other 3.5mm cable plugs into the
speaker and then the speaker will enter into the RCA mode with
voice prompts.
B. The blue color indicator light is on in RCA mode.
FCC Caution.
T
his device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
T
his device may not cause harmful interference, and (2) this device must accept any interference received,
i
ncluding interference
that may cause undesired operation.
A
ny Changes or modifications not expressly approved by the party responsible for compliance could void the
u
ser's authority to operate the equipment.
N
ote: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
t
o part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
i
nterference in a residential installation. This equipment generates uses and can radiate radio frequency energy
a
nd, if not installed and used in accordance with the instructions, may cause harmful interference to radio
c
ommunications. However, there is no guarantee that interference will not occur in a particular installation. If
t
his equipment does cause harmful interference to radio or television reception, which can be determined by
t
urning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
f
ollowing measures:
-
Reorient or relocate the receiving antenna.
-
Increase the separation between the equipment and receiver.
-
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-
Consult the dealer or an experienced radio/TV technician for help.
*RF warning for Mobile device:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
/