LIMITED WARRANTY
ADESSO provides one year limited
warranty for the quality of all its
products in materials and
workmanship.
During this period, ADESSO will repair
or replace all merchandise, which
proved to be defective. However,
ADESSO will not warranty any product
which has been subjected to improper
freight Handling, shipping abuse,
neglect or unauthorized repair or
installation. The warranty also will not
cover products installed with Non-
ADESSO components and product with
broken sealed and assembly trace.
After replacement of RMA, ADESSO
reserves the right to request the total
cost of the replacement products with
broken seals or assembly trace.
If you discover a defect, Adesso will,
at its option, repair or replace the
product at no charge to you, provided
you return it during the warranty
period with transportation charges
pre-paid to Adesso. You must contact
Adesso at [email protected]
for a
Return Merchandise Authorization
number (RMA) prior to returning any
product. For each product returned
for warranty service, please include
your name, shipping address (no P.O.
Box), telephone number, copy of the
bill of sale as proof of purchase and
have the package clearly marked with
your RMA number.
SUPPORT
Website Support:
We have listed most of our
FAQ’s (Frequently Asked Questions) at:
http://www.adesso.com/faqs.asp
.
Please visit our FAQ Service & Support
pages before you contact our E-mail or
Telephone Support.
Email Support:
If our FAQ’s do not help you resolve your
issues, please email suppor[email protected]
Telephone Support:
Toll Free: (800) 467-1195
9:00AM to 6:00PM PST Monday - Friday.
Adesso Inc.
160 Commerce Way
Walnut, CA 91789
Phone (909) 839-2929
Fax (909) 839-2930
www.adesso.com
USER’S GUIDE
RF Wireless Keyboard
and Wireless Optical
Mouse combo
MODEL: KB-998
INTRODUCTION
Experience the freedom of wireless! This 27
MHz RF keyboard and optical mouse set is
enhanced by its sleek black and silver design
complementing any desk, at the office, or at
home. The ergonomically designed optical
scroll mouse features 3-buttons and optical
tracking for precise control. The optical
mouse also provides great accuracy with
minimal hand movement due to its 800 dpi
resolution. The lightweight and stylish
keyboard offers mobility and comfort
wherever you type. With 256 ID’s built into
the receiver, you are guaranteed to enjoy
this RF keyboard and optical mouse without
any interference. Take complete control of
your desktop with hotkeys which give you
quick access to some of your most common
tasks such as e-mail access, volume control,
and launching your web browser. Type,
email, and browse the internet all at the
touch of a button.
FEATURES
• Advanced Optical Technology that
glides on any non-reflective
surfaces
• 27 MHz radio frequency, up to 5
feet effective working range
• Interference?-256 ID’s to avoid
interruption with other devices.
• 7 Multi-media keys for Volume
Up/Down, Mute, Pre track, Next,
Track, Play, and Stop. 5 Internet
keys for www, Prev. page, Next
Page, Email, and search
PACKAGE CONTENTS
• RF Wireless Keyboard
• RF Wireless Optical Wheel Mouse
• USB Receiver
• Two AA batteries for keyboard
• Two AA batteries for mouse
SETUP & INSTALLATION
Install the batteries:
The Optical wireless mouse uses two
AA batteries, and the RF wireless keyboard
uses two AA batteries.
1. Open the battery compartment
cover under the mouse.
2. Place two AA batteries inside the
compartment.
3. Close the battery compartment
cover.
4. Open the battery cover on the
back of the keyboard.
5. Insert two AA batteries, and close
the battery cover.
Connect the Receiver:
1. Turn off the computer before
connecting the receiver to your
computer.
2. For the best performance, place
the receiver at least 8 inches away
from computer,
monitor, and any
other device that may cause radio
interference.
3. Working on a metallic surface will
reduce the RF performance. Avoid
placing the receiver on metallic
surfaces.
4. Plugging or unplugging the cable
from the computer’s USB port
improperly can cause damage to
the USB ports and to the
computer.
This RF wireless keyboard and optical
mouse uses digital radio technology to
communicate. It transmits radio
frequency signals that are picked up
by the receiver and sent to the
computer. The receiver is connected
to the computer’s PS2 or USB port via
a cable. Connect the PS2 or USB
connector to any of the computer’s
PS2 or USB ports.
Set the ID codes:
After installing the batteries and
connecting the receiver to the
computer, turn on your computer and
follow the procedures as below to set
the ID code. There is an ID button on
the bottom of the mouse, one on the
front of the keyboard, and another
one on the front side of the receiver
(see figures on the next page for the
ID button location).
RF Wireless Keyboard
Wireless Optical Mouse
Receiver
1.
Press the ID button on the
receiver, and then press the ID
button on mouse. After a few
seconds, press the ID button on
keyboard, then press the ID
button on the receiver. The ID
code will be set automatically.
2. After the above process, the
receiver LED will blink, when you
move the mouse, or type on the
keyboard. This means that the
keyboard and the mouse have
communicated with the receiver
successfully.
3. If you cannot see the blinking LED
when you move the mouse or
type on the keyboard, the
keyboard/mouse will not work
properly. Please re-install the
batteries and retry the above set
up process.
Using the Mouse:
After successful installation, the
mouse works with Windows
ME/2000/XP, without the need of
software drivers. The mouse comes
with a scrolling wheel, which can
function either as a wheel or as a
button (see figure on left).
1. To scroll up, move the wheel
forward, to scroll down, move the
wheel backward.
2. To use the wheel like a standard
mouse middle button,
simply click
(press down) the wheel button.
Using the Keyboard:
After successful installation, the
Keyboard can work well with Windows
Vista/XP/2000/ME without the need of
software drivers. The keyboard is a
107/5-key model and also includes 16
hot keys to enable one touch access
to multimedia/internet functions.
HOT KEY FUNCTIONS
Function Name Function
Description
Home
Launches the default
Internet browser in
your system.
E-Mail
Compose an e-mail
using the default mail
client.
Search
Browse your
computer for files or
folders
Backward
Go back to your
previously viewed
web page when
viewing the Internet
Foward
Go to the next
viewed web page
when viewing the
Internet
Mute
Mute & Un-Mute the
audio.
Previous
Allows you to go back
to the previous track
when playing a
CD/DVD
Next
Allows you to go to
the next track when
playing a CD/DVD
Volume -
Decreases the
volume of the current
audio.
Volume +
Increases the volume
of the current audio.
Stop Stops the audio/video
file currently being
played.
Play/Pause
Plays/Pauses your
video or audio media.
Favorites
Launches your
favorite web page
directory.
My Computer
Opens up My
Computer
Calculator Opens up your
Windows Calculator
Power
Turns off your PC
TROUBLESHOOTING
o If your keyboard/mouse does
not work after installation,
please check following:
Make sure you have connected
the receiver correctly to the
computer. The receiver
connection has been properly
plugged onto computers USB port.
Make sure you have inserted the
batteries correctly.
Make sure you have set the ID
codes properly, as stated above.
For better performance, place the
receiver at least 20 cm (8inches)
away from computer, monitor, or
other devices that may cause
radio interference. Avoid placing
the receiver on metallic surface.
If without any interference (for
example the other computer
peripherals), the working distance
of the keyboard/mouse, i.e. the
distance between the
keyboard/mouse and the receiver,
is about 5 feet.
o If the mouse cursor does not
move properly, or the
keyboard does not allow you
to type on the screen, please
check the following.
Check the position of your
receiver. Maybe the receiver is to
far away.
Check the large metal devices,
such as microwave, electric stove,
television, hair dryer, which may
interfere with the receiver’s radio
reception.
Check the status of the batteries.
Warning: When the low battery
indicator flashes this means it is time
to replace the batteries.
Important: The mouse will go into
power saving mode after 8 min. without
being used. To wake up the mouse, users
need to click either button on the mouse.
REQUIREMENTS
• Plug n Play with Windows Vista,
XP, 2000, and ME. (NT, and 98
requires driver installation)
http://www.adesso.com/drivers/K
B-998.zip )
• IBM AT and above computer
systems.
• Available PS/2 port
-
1
-
2
-
3
-
4
