2. TRANSGO
  3. 4L60E-Boost
4L60E-Boost

TRANSGO 4L60E-Boost User manual

  • Hello, I've reviewed the instructions for the TRANSGO 4L60E-Boost High Performance .500 Boost Valve Kit. The document provides information about how to install the kit with focus on the turbine sensor presence. It also describes the kit's ability to reduce clutch and band issues. I'm here to help answer any questions you might have about it.
  • What does the .500 Boost Valve Kit do?
    What problems does the kit reduce?
    What type of bushings and valves does it replace?
Increases pressure rise response for
use in Trucks, police, taxis, delivery
and Hi-performance.
Also reduces 3-4 clutch failure, band
failure and Low reverse clutch slip.
Main Regulator Valve
ORANGE
ORANGE
Snap Ring
4L60E-Boost
High Performance
.500 Boost Valve Kit
New Boost Valve
New Bushing
Spacer
Replaces both the Early 1.910 (long)
& Late 1.810 (short) Bushing & Valve.
No worries! Fits both types!
If you have a Turbine Sensor harness here,
Stop! Transmission removal will be required
& Pump must be removed from transmission
to install the New Boost Valve.
Do NOT attempt to pull or flex the connector
or harness in an attempt to install the Boost
Valve. Damage to the sensor or harness will
require transmission removal to repair.
Turbine Speed Sensor was introduced to
some models in 2006 & coverage was
expanded in 2007 & up models.
No speed sensor here? Great!
Proceed with installation.
Installation Note:
Boost Valve Location-Pan View
©TransGo 2016
2007 Model Shown
/