SKYDANCE dv Owner's manual

dv
SKYDANCE
Brand
SKYDANCE
Model
dv
Type
Owner's manual

SKYDANCE dv is a DALI 0/1-10V Dimmer with 2 DALI addresses, 2-channel 0/1-10V output, high voltage AC input, and one high voltage AC relay output. It features selectable 0-10V or 1-10V output, complies with DALI standard protocols, and supports both manual and automatic DALI address assignment. The device has a compact size and comes with a 5-year warranty. With its dimming range of 0-100% and linear dimming curve, it can be used for various lighting applications, including single-color LED strips and 0-10V dimmable drivers.

SKYDANCE dv is a DALI 0/1-10V Dimmer with 2 DALI addresses, 2-channel 0/1-10V output, high voltage AC input, and one high voltage AC relay output. It features selectable 0-10V or 1-10V output, complies with DALI standard protocols, and supports both manual and automatic DALI address assignment. The device has a compact size and comes with a 5-year warranty. With its dimming range of 0-100% and linear dimming curve, it can be used for various lighting applications, including single-color LED strips and 0-10V dimmable drivers.

1
User Manual Ver 1.0.0
Model No.: DV
DALI 0/1-10V Dimmer
AC input/2 DALI address/2 channel 0/1-10V signal output
Features
●2 DALI address, 2 channel 0/1-10V output.
● High voltage AC input, one high voltage AC relay output.
● 0-10V or 1-10V output selectable.
● In accordance with DALI standard protocol IEC 62386-101, IEC 62386-102,
IEC 62386-206 and in compliance with DALI products from other international
incorporation.
● DALI address can be manually assigned and shown in digital display or
automatically assigned by DALI master. LVD RED
Technical Parameters
Output signal 2 x (1/1-10)VDC
Output current 2CH,20mA/CH
Input and Output
Input voltage 100-240VAC
Gross weight 0.140kg
Dimming data
Dimming range
DALI
0 -100%
Input signal
Operation temperature
Case temperature (Max.)
Environment
IP20
IP rating
Ta: -30
O
C ~ +55
O
C
Tc:
+60
O
C
Dimming curve Linear
Safety and EMC
EMC standard (EMC) ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-17 V3.2.4
Certication CE,EMC,LVD
EN 62368-1:2020+A11:2020
Safety standard(LVD)
Mechanical Structures and Installations
Setting key Digital display
CH1 0-10V output +
AC L Output
DALI INPUT
DA1
DA2
L
N
N
L1
AC100-240V
OUTPUT
AC100-240V
INPUT
0/1-10V OUTPU T
CH1+
CH1-
CH2+
CH2-
0-6 0-9
DALI signal input, no need
distinguish plus-minus polarity
CH1 0-10V output -
CH2 0-10V output -
CH2 0-10V output +
AC L input
AC N input
AC N Output
187.00 mm
46.00 mm
22.00 mm
Wiring Diagram
DALI INPUT
DA1
DA2
L
N
N
L1
AC100-240V
OUTPUT
AC100-240V
INPUT
0/1-10V OUTPU T
CH1+
CH1-
CH2+
CH2-
0-6 0-9
DV
+Single color LED strip
V+
V-
DI M+
DI M-
AC N
AC L
+
V+
V-
DI M+
DI M-
AC N
AC L 0-10V Dimmable Driver
0-10V Dimmable Driver
Single color LED strip
N
L
AC 100-240V DALI
Master
Note:
We recommend the number of LED drivers connected to 0/1-10V dimmer (each channel) does not exceed 20 pieces, The maximum length of the wires
from dimmer to LED driver should be no more than 30 meters.
Size
Package
L190x W48 x H25mm Warranty
5 years
Warranty
DALI address can also be assigned by DALI Master controller automatically.
Please refer to user manuals of compatible DALI Masters for specic operations.
The digital display will show “AU” When the DALI master is assigning address.
After address is assigned, the digital display will show the start DALI address”xx”, xx is from 00 to 63.
DALI address assigned by DALI masters
● Long press any of the two buttons for 2s, prepare for set the start DALI address, digital display start ashes.
● Short press left button to set “tens” position and right button to set “units” position.
● The address can be set from 00~62-FF. no DALI address is assigned for the dimmer, digital display shows “FF”.
● Address assignments are sequential. If the set address value is 01, the CH1 address value is 01, and the CH2 address value is 02, The display shows the
CH1 address value.
● Long press any of the two buttons for 2s or timeout 10s, quit start DALI address setting, digital display stop ashes.
Set DALI Address via buttons
● Long press two buttons at the same time for 2s, switch between 1-10V output or 0-10V output.
● Press the left / right button to change the output mode.
● Long press any of the two buttons for 2s or timeout 10s, quit output mode setting.
Operation
Set 0/1-10V output mode
0/1-10V output mode
Mode Channel Output
00
01
10
11
CH 1:0-10V CH 2:0-10V
CH 1:0-10V CH 2:1-10V
CH 1:1-10V CH 2:0-10V
CH 1:1-10V CH 2:1-10V
2
User Manual Ver 1.0.0
1
版本1.0.0
型号:DV
DALI0/1-10V调光器
AC输⼊/2DALI地址/2通道0/1-10V信号输出
特点
●2DALI地址,2通道0/1-10V输出。
●⾼压AC输⼊,⾼压AC继电器输出。
●可选择0-10V或1-10V输出。
● 符合DALI标准协议IEC62386-101,IEC62386-102,
IEC62386-206，兼容来⾃其他供应商的DALI产品。
● DALI地址可以⼿动分配，也可以由DALI主机⾃动分配。
LVD RED
技术参数
输出信号 2x(1/1-10)VDC
输出电流 2CH,20mA/CH
输⼊和输出
输⼊电压 100-240VAC
⽑重 0.140kg
调光数据



调光范围
DALI
0-100%
输⼊信号
⼯作温度
外壳最⾼温度
环境
IP20
IP等级
调光曲线 线性
安全和EMC
EMC标准(EMC) ETSIEN301489-1V2.2.3
ETSIEN301489-17V3.2.4
认证 CE,EMC,LVD
EN62368-1:2020+A11:2020
安全标准(LVD)
机械结构和安装
设置键 数字显⽰屏
CH10-10V输出+
ACL输出
DALI I NPUT
DA1
DA2
L
N
N
L1
AC100-240V
OUTP UT
AC100-240V
INPU T
0/1-10V OUTPUT
CH1+
CH1-
CH2+
CH2-
0-6 0-9
DALI信号输⼊,
⽆需区分正负极性
CH10-10V输出-
CH20-10V输出-
CH20-10V输出+
ACL输⼊
ACN输⼊
ACN输出
187.00 mm
46.00 mm
22.00 mm
接线图
DALI I NPUT
DA1
DA2
L
N
N
L1
AC100-240V
OUTP UT
AC100-240V
INPU T
0/1-10V OUTPUT
CH1+
CH1-
CH2+
CH2-
0-6 0-9
DV
+单⾊LED灯带
V+
V-
DI M+
DI M-
AC N
AC L
+
V+
V-
DI M+
DI M-
AC N
AC L 0-10V调光电源
0-10V调光电源
单⾊LED灯带
N
L
AC100-240V DALI
主控
注意:
建议连接到0-10V调光器的LED电源数量不超过20个，从0-10V调光器到LED电源的最⼤电线⻓度不应超过30⽶。
尺⼨
包装
190x48x25mm(⻓x宽x⾼） 质保
5年
质保
Ta: -30
O
C ~ +55
O
C
Tc:
+60
O
C
景晴光电
DALI地址也可以由DALI主控⾃动分配，请参考DALI主控⽤⼾⼿册。
当DALI主控分配地址时，显⽰“AU”。
地址分配完毕，显⽰起始DALI地址“xx”，xx值范围从00到63。
DALI主控设置DALI地址
● ⻓按两个按键中的任意⼀个键2秒，准备设置开始DALI地址，数码管开始闪烁。
● 短按左键设置⼗位地址值，短按右键设置个位地址值。
● 地址值可设置为00~62-FF。当调光器未分配地址时，显⽰“FF”。
● 两个通道的地址分配是顺序的。如果设定的地址值为01，则CH1的地址值为01,CH2的地址值为02,显⽰屏显⽰CH1地址值。
● ⻓按两个按键中的任意⼀个键2秒或10秒未操作，退出地址设置状态，数字显⽰停⽌闪烁。
按键设置DALI地址
●同时⻓按两个按键2秒，准备切换1-10V或0-10V输出。
●按左/右键更改输出模式。
● ⻓按两个按键中的任意⼀个键2秒或超过10秒，退出输出模式设置。
操作
设置0/1-10V输出模式
0/1-10V输出模式
模式 通道输出
00
01
10
11
CH1:0-10VCH2:0-10V
CH1:0-10VCH2:1-10V
CH1:1-10VCH2:0-10V
CH1:1-10VCH2:1-10V
2
版本1.0.0
⼴州景晴光电科技有限公司GuangzhouSkyacneCo.,Ltdwww.iskydance.cn
本资料上的内容均经过认真核对，如有任何印刷错漏或内容上的误解，本公司保留最终解释权。
产品若有技术改进，会编⼊新版说明书中，恕不另⾏通知。
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

SKYDANCE dv Owner's manual

dv
SKYDANCE
Brand
SKYDANCE
Model
dv
Type
Owner's manual

SKYDANCE dv is a DALI 0/1-10V Dimmer with 2 DALI addresses, 2-channel 0/1-10V output, high voltage AC input, and one high voltage AC relay output. It features selectable 0-10V or 1-10V output, complies with DALI standard protocols, and supports both manual and automatic DALI address assignment. The device has a compact size and comes with a 5-year warranty. With its dimming range of 0-100% and linear dimming curve, it can be used for various lighting applications, including single-color LED strips and 0-10V dimmable drivers.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents