1
User Manual Ver 1.0.0
Model No.: DV1
DALI 0/1-10V Dimmer
AC input / 1 DALI address / 0/1-10V signal output / dry contact output
Features
●1 DALI address, 1 channel 0/1-10V output.
● Powered by AC100-240V.
● 10 A dry contact mains rated relay output.
● 0-10V or 1-10V output selectable.
● In accordance with DALI standard protocol IEC 62386-101, IEC 62386-102,
IEC 62386-206 and in compliance with DALI products from
other international incorporation.
● Compliant DALI device type 5. LVD
Technical Parameters
Output signal 0/1-10V, 20mA
Input and Output
Input voltage 100-240VAC
Dimming range 0 -100%
Dimming curve Linear(default)
ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-17 V3.2.4
Certication CE,EMC,LVD
EN 62368-1:2020+A11:2020
Safety standard(LVD)
Wiring Diagram
MechanicalStructuresandInstallations
LED indicator
AC N input
AC L input
131 mm
37mm
20.5 mm
DALI signal input, no need
distinguish plus-minus polarity
0-10V signal output +
0-10V signal output -
Input current 0.02A
L
NKB
DA2
DA1
KA
INPUT
100-240VAC
0/1-10V OUT
10A
230VAC
DALI IN
DIM+
DIM
Dry contact output
Max relay load current
10Aresistiveload
8A incandescent
5Ainductive load
Safety and EMC
EMC standard (EMC)
Dimming data
Operation temperature
Case temperature (Max.)
Environment
IP20
IP rating
Ta: -30
O
C ~ +55
O
C
Tc:
+60
O
C
Warranty
5 years
Warranty Gross weight
Size
Package
W135x L40 x H23mm
0.089kg
N
L
AC100-240V
DALI
Master
+Single color LED strip
V+
V-
DI M +
DI M -
AC N
AC L 0-10V Dimmable Driver
● dry contact outputConnect with DALI 0/1-10V dimming driver (no use )
L
NKB
DA2
DA1
KA
INPUT
100-240VAC
0/1-10V OUT
10A
230VAC
DALI IN
DIM+
DIM
DALI Bus
Power Supply
● dry contact outputConnect with DALI 0/1-10V dimming driver (use )
Note:
We recommend the number of LED drivers connected to 0/1-10V dimmer does not exceed 20 pieces, The maximum length of the wires
from dimmer to LED driver should be no more than 50 meters.
Operation
DALI address can also be assigned by DALI Master controller automatically.
Please refer to user manuals of compatible DALI Masters for specic operations.
DALI address assigned by DALI masters
Set 0/1-10V output mode
Switching 0-10V or 1-10V output mode via the DALI master software interface.
2
User Manual Ver 1.0.0
N
L
AC100-240V
DALI
Master
+Single color LED strip
V+
V-
DI M +
DI M -
AC N
AC L 0-10V Dimmable Driver
L
NKB
DA2
DA1
KA
INPUT
100-240VAC
0/1-10V OUT
10A
230VAC
DALI IN
DIM+
DIM
DALI Bus
Power Supply
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Sunricher SRP-TRIAC-10CC User manual
-
Dali Mini Owner's manual
-
-
-
-
-
SIGOR 9057801 Operating instructions
-
-
Deko-light 862160 Owner's manual
-
