Compaq dc5000 - Microtower PC Using Instructions

Brand: Compaq

Model: dc5000 - Microtower PC

Type: Using Instructions

Using the Small Form Factor

Computer in a Minitower

Configuration

The Small Form Factor computer can be used in either a minitower or desktop

configuration. To use it in the minitower configuration, you must purchase a

tower stand from HP (part number 316593-001). Go to www.hp.com to order

this part.

✎

Using the computer in a minitower

configuration without using the tower stand

will compromise the terms of your warranty.

Ä

CAUTION: Towering this unit without the use of

the tower stand can cause the unit to overheat

and may result in damage to the computer or

data loss.

Ä

CAUTION: Ensure at least 4 inches (10.2 cm)

of space on all sides of the computer remains

clear and free of obstructions.

To install the tower stand:

1. Align the hole at the base of the computer with the post and thumbscrew in

the stand 12.

2. Tighten the screw to secure the computer to the stand 3 . This adds stability

and helps to ensure proper airflow to the internal components.

© Copyright 2004 Hewlett-Packard Development Company, L.P. The information contained herein

is subject to change without notice. The only warranties for HP products and services are set forth in

the express warranty statements accompanying such products and services. Nothing herein should

be construed as constituting an additional warranty. HP shall not be liable for technical or editorial

errors or omissions contained

361658-001

1
2

Compaq dc5000 - Microtower PC Using Instructions

Brand: Compaq

Model: dc5000 - Microtower PC

Type: Using Instructions

Related papers

Other documents