CTC Union ICR-W401 Quick Installation Manual

Brand: CTC Union

Model: ICR-W401

Type: Quick Installation Manual

Quick Installation Guide

sales@ctcu.com

ICR-W401

4G LTE WiFi IEEE 802.11b/g/n 2T2R Router

ICR-W401 QIG

Version 0.9 October, 2019

2019 CTC Union Technologies Co., LTD.

All trademarks are the property of their respective owners.

Technical information in this document is subject to change without notice.

CTC Union Technologies Co.,Ltd.

Far Eastern Vienna Technology Center

(Neihu Technology Park)

8F, No. 60 Zhouzi St.,

Neihu, Taipei 114, Taiwan

T +886-2-26591021

F +886-2-26590237

E [email protected]m

H www.ctcu.com

Table of Contents

Introduction .................................................................................. 4

Package List ................................................................................. 4

Features ........................................................................................ 4

Specifications ............................................................................... 5

Panel ............................................................................................. 7

Earth Ground Connection ............................................................ 8

LED Indicators .............................................................................. 8

CLI & Web Basic Operation ......................................................... 9

Installation .................................................................................. 10

Regional Code and Band Information ....................................... 11

Application .................................................................................. 11

Introduction

ICR-W401 are compact, lightweight and high performance 4G-LTE

(Long-Term Evolution) routers with IEEE 802.11b/g/n WiFi function. They

are equipped with one Ethernet port and one WAN port for fast

Ethernet connections and also support uplink to 2G/3G/4G mobile

networks.

Integrated with WAN, LAN, SIM, VPN, Firewall, built-in DI/DO and

serial port services, ICR-W401 routers are easy to be configured through

embedded Web user interface. Additionally, they adopt higher level of

industrial grade design which is the ideal solution for Industrial Internet

of Things (IIoT) and M2M (Machine-to-Machine) applications, such as

remote controlling and monitoring, bus ticketing collection system, CCTV,

SCADA, digital signage, kiosk and intelligent traffic systems.

Package List

 One ICR-W401 device

 Two WiFi antennas

 Two LTE antennas

 One GPS antenna

 DIN Rail kit

Features

 Full native mode performance

 Optical connectors: LC / UPC

 Passive model requires no power

 Protocol transparent, no limitation

 Utilizes industry standard ITU CWDM wavelength

 High isolation WDM

 Low insertion loss

 Wide operation wavelength range

 Environmentally stable

Specifications

Interface

 1 x Micro SIM card slot (push-push type)

 2 x SMA connectors for detachable LTE antenna

 2 x RP-SMA for WiFi antenna

 1 x WAN (10/100Base-TX) RJ-45

 1 x LAN (10/100Base-TX) RJ-45

 1 x DI (non-isolated) and 1 x DO (non-isolated)

 1 x RS-232 for serial COM port or console configuration

 1 x GPS detachable antenna

 Reset push button

LTE Interface

 4G LTE: FDD-LTE, TDD-LTE

 3G: WCDMA

 2G: GSM/EDGE

 GNSS: GPS

 LTE Data Rate: Cat 4; 150Mbps (Download), 50Mbps (Upload)

 1 x Micro SIM card slot (push-push type)

WiFi Interface

 IEEE802.11b/g/n WiFi standard

 Support AP or Station mode

 2 x RP-SMA for WiFi antenna

 2T2R 300Mbps wireless operation rate

 2.4GHz radio for wireless

Power

 Support removable terminal block

 Power input: 12/24/48VDC (9.6~60VDC)

 Power consumption: 7W (Max.)

Mechanical

 IP30 grade housing protection

 Fanless design

 Dimensions: 30 mm (W) x 92 mm (H) x 75 mm (D)

 Mounting: DIN rail mounting or Wall mounting (Optional)

 Weight: 400g

Environmental

 Operating Temperature: -30°C~70°C

 Storage Temperature: -40°C~85°C

 Humidity: 10%~95% (Non-condensing)

 MTBF (MIL-HDBK-217): 271,952 Hours

Certification

 EMC: CE

 EMI: EN301 489, FCC

 EMS: EN301 489

 Radio: EN301511, EN301908-1, EN301908-2, EN301908-13, EN300328,

EN303413, EN62311

 Shock: IEC 60068-2-27

 Freefall: IEC 60068-2-32

 Vibration: IEC 60068-2-6

Panel

Index No.

Description

Fast Ethernet RJ-45 LAN port

Fast Ethernet RJ-45 WAN or LAN port

Terminal block for PWR, DI, DO, RS232

LED indicators (PWR, Mobile, FN)

Micro SIM card slot

Mobile MAIN connector

Mobile AUX connector

GPS connector

Earth grounding

WPS/Reset push button

SMA antenna connectors

Figure 1. Front Panel

Figure 2. Left Side Panel

Figure 3. Right Side Panel

Earth Ground Connection

An earth ground connector is provided on the left side panel.

Grounding the device can help to release leakage of electricity to the

earth safely so as to reduce injuries from electromagnetic interference

(EMI). Prior to connecting to the power, it is important to connect the

ground wire to the earth. Follow steps below to install ground wire:

Step 1. Prepare one appropriate ground screw and one grounding cable.

Step 2. Attach the grounding screw to the ring terminal of the grounding

cable. Make sure that the grounding cable is long enough to

reach the earth.

Step 3. Use a screwdriver (or other tools) to fasten the grounding screw

on the earth ground hole securely.

LED Indicators

LED

Color

Status

Meaning

PWR

Green

The system is receiving power and

up.

Off

The system is down.

Mobile

Green

High signals.

Slow Blinking

Medium signals or reset

Fast Blinking

Low signals or reset to default

Heart Beat

WPS processing

Off

Error

Green

VPN connected.

Slow Blinking

Internet connected or reset

Fast Blinking

System rebooting or reset to

default

Heart Beat

WiFi connected

Figure 4. Grounding the Device

Ring-type

terminal

Fork-type

terminal

CLI & Web Basic Operation

ICR-W401 are 4G-LTE cellular routers with WiFi function for

industrial uses. Initial assignment of IP address may be accomplished via

Command Line Interface (CLI). Once the desired IP address has been

configured, a web browser can be used to configure the device through

a more easy-to-use graphical user interface (GUI).

To use CLI, you need to prepare a RS232/DB9 console cable. First,

connect one end of the RS-232 cable correctly to the terminal block (TXD,

RXD, GND pins for RS232) and the other end to PC COM port for RS-232

signal input. If your PC does not have a RS-232 signal input interface, a

USB converter is needed. Then, apply power to the router. Configure the

terminal emulation software (such as PUTTY) as follows:

115200 speed, 8 data bits, no parity, 1 stop bit, no flow control

At the "Username:" prompt, enter 'admin' (lower case, no quotes).

Just press Enter when prompted for password.

To set the desired IP address and subnet mask (For Example: sets

IP to 192.168.0.5, subnet to 255.255.255.0), issue the following

commands:

ICR-W401# lan

ICR-W401/ lan#ipv4

ICR-W401/ lan/ipv4#ip

ICR-W401/ lan/ipv4/ip#addr 192.168.0.5

ICR-W401/ lan/ipv4/ip#mask 255.255.255.0

ICR-W401/ lan/ipv4/ip#apply

Then, press Enter.

Once the desired IP address has been configured, you can login

the device via web browser using the configured IP address. For

complete operation of the device via Web GUI, please refer to the

manual.

NOTE: The factory default IP address is 10.1.1.1 with mask

255.255.255.0

Installation

The router can be installed on the DIN rail or mounted on the wall.

When installing the DIN rail or wall-mounting bracket, be sure to

correctly align the orientation pin.

Figure 5. DIN Rail Figure 6. Wall Mount

The router with DIN Rail bracket has a steel spring in the upper rail

of the bracket. This spring is compressed for mounting and un-mounting

by applying downward force.

Figure 7. Mounting Figure 8.Un-mounting

Regional Code and Band Information

Band

Region

Code

4G LTE

Regions or

Countries

FDD LTE

TDD

LTE

WCDMA

GSM/

EDGE

B1(2100), B3(1800),

B5(850), B7(2600),

B8(900), B20(800)

B38(2600),

B40(2300),

B41(2500)

B1(2100),

B5(850),

B8(900)

B3(1800),

B8(900)

Europe, Africa,

Middle East,

Korea, India,

Thailand

B2(1900), B4(1700),

B12(700)

B2(1900),

B4(1700),

B5(850)

USA (AT&T, T-

Mobile)

B1(2100), B2(1900),

B3(1800), B4(1700),

B5(850), B7(2600),

B8(900), B28(700)

B40(2300)

B1(2100),

B2(1900),

B5(850),

B8(900)

B2(1900),

B3(1800),

B5(850),

B8(900)

ANZ, South

America,

Taiwan

B1(2100), B3(1800),

B8(900), B18(850),

B19(850), B26(850)

B41(2500)

B1(2100),

B6(850)

B8(900),

B19(850)

Japan

Application

Figure 9. Vending Machine Logistics System

Version

Date

Description

0.9b

2019/10/21

Use new document format

0.9c

2019/12/27

User A4 document format

CTC Union ICR-W401 Quick Installation Manual

CTC Union ICR-W401 Quick Installation Manual

CTC Union ICR-W401 Quick Installation Manual

Related papers

Other documents