ASIT T10 User manual

Brand
ASIT
Model
T10
Category
Cable network testers
Type
User manual
Network Equipment สำ หรับกล้องวงจรปิด
HD TESTER
Real HD stream coaxial tester
HD Tester Manual
1. General
The new HD monitoring test, support AHD, TVI, CVI, CVBS
video format, the largest support 5 million pixels, Coaxial call
camera OSD menu. Support PTZ 485 control, DC 12V power
output, audio test, VGA input, HDMI input, cable test, coaxial
cable test, LED lighting and other functions.
Product Funtions:
Video signal testing：Compatible with AHD, TVI, CVI,
CVBS video test
● 5.0 inch 800 (RGB) x480 resolution. PAL/NTSC (Auto
adapt).
● PTZ control：RS485 control, Porter 1200 ~ 115200bps,
compatible with PELCO-D / P protocol
● Image generator
Multi-format video OUT port image generator, sending a
variety of standard (e.g. PAL, NTSC) color graphics section
● Output DV12V/1A power out,supply temporarily power
for the camera
● USB2.0 interface provides 5V / 1A emergency power
output
● audio signal input：tester whether sound normal
● Enhanced UTP cable / BNC cable test, with indicator
light, the test distance can reach 100-150 meters
● VGA input： VGA support 1024 * 768,1280 * 1024
resolution，VGA access need to enter the menu to select VGA
mode
● HDMI input：HDMI support 480I / P, 576I / P, 720I / P,
1
HD Tester Manual
อุปกรณ์ทดสอบภาพ CCTV Tester 4 in 1
(AHD, TVI, CVI, CVBS)
HD TESTER
Real HD stream coaxial tester
ASIT-T10
2. Product Accessories
● HD coaxial tester
● Adapter DC5V 1.0A（with USB cable）
● I bulit-in 3.7V Lithium polymer bottery,3000mAh
● BNC cable
● RS485 connector
● 12V OUTput Power cable
● Audio cable
● BNC / UTP cable test box
● Wrist band
● Instruction Manual
● Tool box
2
1080I / P . HDMI access will automatically switch to HDMI mode
(HDMI input is optional*)
● Coaxial HD test
AHD tester support 720P 25F/30F/50F/60F/,1080P
25F/30F. (4MP AHD camera teste is optional*)
TVI tester support 720P 25F/30F/50F/60F/,1080P 25F/30F.
(5MP TVI camera teste is optional*)
CVI tester support 720P 25F/30F/50F/60F/,1080P 25F/30F.
(4MP TVI camera teste is optional*)
● LED emergency lighting
● bulit-in 3.7V Lithium polymer bottery,3000mAh
3. Front Panel
3
1 2 3 4 5 6 7 8 9
1 Power Indicator
2 12V output power indicator
3 Data transmission indicator
4 Power on indicator
4
10 11 12 13 14 15
5 ZOOM+
6 ZOOM-
7
Five-way button：OSD menu- up –
down- left -right
8 FOCUS+
9 FOCUS-
10 UTP Cable test
11 Output DC12V1A power
12 5V charging indicator
16 17 18 19
5
13 RS485 Interface
14 VGA input interface
15 Analog / HD TVI/CVI/AHD signal input
16 LED lamp
17 Audio input
18 Output DC5V1A power
19 switch：LED-ON-OFF
20
6
20 HDMI input interface
7
4. Operation
Pressing Call the OSD menu,
1.Pressing ,Enter the settings page
50
Set the brightness,contrast, language,VGA input
switch,reset and other operations,Pressing Save and exit to
the previous menu,no operation automatically after 3 seconds
to exit the menu.
2.Pressing ,Enter the UTP cable / BNC cable test page
Auto start UT cable / BNC cable test, Pressing ,Save and
exit to the previous menu,no operation automatically after 3
seconds to exit the menu.
3.Pressing ,Enter the PTZ settings page Operation ,
set the parameters up and down left and right
8
（BNC）
（BNC）
4.Reset
5.VGA input switch
9
HD
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

ASIT T10 User manual

Brand
ASIT
Model
T10
Category
Cable network testers
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents