Legrand 30TC-2V Operating instructions

INSTALLATION INSTRUCTIONS

AMTPN/ 25DTPN

Cabling System Adapter

For Wiremold Modular

Tele-Power

Poles

The Wiremold Company

60 Woodlawn Street, P.O. Box 332500

West Hartford, CT 06133-2500

Tel. (203) 233-6251 Fax 203-232-2062

39208 694

2. Screw riser plate into 8” cover section provided, using

#6 self tapping screws.

3. Select adapter cover to be used, snap adapter into

AMTPN/25DTPN wire per instructions. Snap

AMTPN/25DTPN to space provided at bottom of pole.

1. Insert screw driver into slot, turn slowly, adjust pressure.

Remove communications cover from power pole.

Adapter covers not included.

I4N RSN T4N C4N

DEC TCN TTN CCN

Wiremold Electrical Systems conform to and

should be properly grounded in compliance with

requirements of the current National Code or

codes administered by local authorities.

All electrical products may represent a possible

shock or fire hazard if improperly installed or used.

Wiremold electrical products are UL listed, made

for interior use in dry locations only and should be

installed in conformance with current local and/or

the National Electrical Code.

8” Cover

Riser

Plate

#6 Self

Tapping

Screw