Danfoss EV210B 1.5-4.5 Installation guide

Brand: Danfoss

Model: EV210B 1.5-4.5

Type: Installation guide

IC.PI.200.E2.02 / 520B4297

© Danfoss A/S 12-2010 (AC-AKC/bpv)

032R9319

032R9319

Instruction

EV210B

Normally Closed/Normally open (NC/NO)

Types

Type EV210B 1.5, 2, 3, 4.5 Normally Closed (NC)

Type EV210B 1.5, 2, 3, 4.5 Normally Open (NO)

NC

NO

Coil replacement

1. Before removing the coil, voltage

must be disconnected, otherwise

the coil will burn out.

2. Use a screwdriver to lever the coil

from the armature.

Mounting the valve

1. Clean the pipe system before

mounting the valve.

2. Mount lter in front of the

valve if there are impurities in

media.

3. The arrow cast on the body

and cover must point in the

direction of the ow.

4. Mount the valve as shown in

the pictures. The valve can be

mounted with a angle of 360o

from upright position. Installa-

tion with the coil upwards is pre-

ferred.

5. Use counterforce when tight-

ening up pipe connections,

i.e. use a spanner on both the

valve body as well as on the

pipe connector.

To be continued on page 2

Media temperature

Gasket materials Media Temperature

EPDM Water

-30°C → +120°C

FKM Oil / Inert gas incl air

-10°C → +100°C

© Danfoss A/S 12-2010 (AC-AKC/bpv)

IC.PI.200.E2.02 / 520B4297

2

Warning

6. The pipes on both sides of the

valve must be securely fastened.

7. Test the system

Maximum pressure is 50 bar.

Mounting the coil

1. Warning

Never switch on power to the

coil when the coil is dismounted

from the valve. Otherwise the

coil may be damaged and there

is risk of injuries and burns.

2. Mount the label on the coil and

put the armature tube label over

the tube.

3. Mount the O-ring.

4. Mount the coil on the valve.

The coil must CLICK in order to

be positioned correctly.

�

Spare parts kit

Normally closed valves (NC)

Test pressure

MAX. 50 bar

EV210B 3 B G14 /

F NC 000 /

032UXXXX / WWY /

made in XXXXXXX

Safe working pressure

Types Pressure

EV210B 1.5, 2, 3 and 4.5 Normally Closed (NC)

EV210B 1.5, 2 , 3 and 4.5 Normally Open (NO)

30 bar

Spare parts kit

Normally open valves (NO)

Type

Code no.

FKM EPDM

EV210B 1.5, 2, 3 and 4.5 032U2003 032U6000

Type

Code no.

FKM EPDM

EV210B 1.5, 2, 3 and 4.5 032U2004 032U2005

1
2

Danfoss EV210B 1.5-4.5 Installation guide

Brand: Danfoss

Model: EV210B 1.5-4.5

Type: Installation guide

Download PDF

Related papers