Danfoss EV210B 1.5-4.5 Installation guide

Danfoss
Brand
Danfoss
Model
EV210B 1.5-4.5
Type
Installation guide
1 IC.PI.200.E1.02 - 520B2570 © Danfoss 03/2006 AC-DSL/frz
032R9319
032R9319
Instruction
EV210B
Normally Closed/ Normally open (NC/NO)
To be continued on page 2
Media temperature
Gasket material Media Temperature
EPDM
Water
-30
o
C → +120
o
C
FKM
Oil / Inert gas incl air
-10
o
C → +100
o
C
NC NO
1.Clean the pipe system
before mounting the valve
2.Mount fi lter in front of the
valve if there are impurities
in media
3.The arrow cast on the body
must point in the direction of
the fl ow
4.Mount the valve as shown in the pictures. The valve
can be mounted with a angle of 360
o
from upright
position.Installation with the coil upwards is preferred.
5.Use counterforce when
tightening up pipe connec-
tions, i.e. use a spanner on
both the valve body as well
as on the pipe connector.
2.Use a screwdriver to lever
the coil from the armature.
1.Before removing the coil,
voltage must be
disconnected,otherwise
the coil will burn out
Types
Type EV210B 1.5, 2, 3, 4.5 Normally Closed (NC)
Type EV210B 1.5, 2, 3, 4.5 Normally Open (NO)
Mounting the valve
Coil replacement
2 IC.PI.200.E1.02 - 520B2570 © Danfoss 03/2006 AC-DSL/frz
Warning
Spare parts kit
Normally closed valves (NC)
Safe working pressure
Mounting the coil
Note 1. Warning
Never switch on power to the coil
when the coil is dismounted from
the valve. Otherwise the coil may
be damaged and there is risk of
injuries and burns.
2.Mount the label on the coil
and put the armature tube
label over the tube.
6.The pipes on both sides of
the valve must be securely
fastened.
7.Test the system
Maximum pressure is 50 bar.
Spare parts kit
Normally open valves (NO)
Test pressure
MAX. 50bar
Type Code no.
FKM EPDM
EV210B 1.5, 2, 3 and 4.5
032U2003 032U6000
4.Mount the coil on the valve.
The coil must CLICK in order
to be positioned correctly.
3.Mount the O-ring.
Type Code no.
FKM EPDM
EV210B 1.5, 2, 3 and 4.5
032U2004 032U2005
Types Pressure
EV210B 1.5, 2, 3 and 4.5 Normally Closed (NC
)
EV210B 1.5, 2 , 3 and 4.5 Normally Open (NO)
30 bar
  • Page 1 1
  • Page 2 2

Danfoss EV210B 1.5-4.5 Installation guide

Danfoss
Brand
Danfoss
Model
EV210B 1.5-4.5
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers