Logik L4SCAN11 User manual

Brand: Logik

Model: L4SCAN11

Type: User manual

Portable A4 Scanner

Instruction Manual

L4SCAN11

Contents

Unpacking ...........................................................................................................3

System Requirements ........................................................................................4

Product Overview ...............................................................................................5

Indicator Signaling .............................................................................................6

Stand Along (for scanning)................................................................................................6

USB Connect (for recharge battery only or read/copy le) ............................................6

Installing and Charging Battery ........................................................................7

Battery Status .........................................................................................................................7

Operation ............................................................................................................9

Select the Scan File Format ............................................................................................10

Scan an Original ..................................................................................................................11

Power o the Scanner .......................................................................................................12

Connecting to a Computer .............................................................................. 13

Connect the scanner to a computer ............................................................................13

Disconnect the scanner from a computer .................................................................14

Arcsoft BizScanner .......................................................................................... 15

Install BizScanner ................................................................................................................15

Run BizScanner ....................................................................................................................17

Start to Use BizScanner .....................................................................................................18

Maintenance .................................................................................................... 24

Calibrating the scanner ....................................................................................................24

Cleaning the Sensor Glass ...............................................................................................25

Hints and Tips .................................................................................................. 26

Specications ................................................................................................... 27

Safety Warnings ............................................................................................... 28

Unpacking

Remove all packaging from the unit. Retain the packaging. If you dispose it

please do so according to local regulations.

The following items are included:

Thank you for purchasing your new Logik Portable A4 Scanner.

These operating instructions will help you use it properly and safely.

We recommend that you spend some time reading this instruction manual

in order that you fully understand all the operational features it oers. You

will also nd some hints and tips to help you resolve any issues.

Read all the safety instructions carefully before use and keep this

instruction manual for future reference.

Software Disc

P.N.: 2D1-PS003-D0161A

CIS Cleaning Swab

P.N.: 2AX-PS003-00001

Mains Adapter

P.N.: 060-CAP00-50513

Calibration Card

P.N.: 2P8-PS003-0001

USB Cable

P.N.: 052-USB0A-X0800

Lithium Battery

P.N.: 060-3450A-AGX10

Pouch

P.N.: 2P6-PS003-D0161

If items are missing, or damaged please contact Partmaster (UK

only). Tel: 0844 800 3456 for assistance.

Scanner

System Requirements

• Windows® XP / Vista™ / Windows® 7

Support Windows OS only.

• Pentium® IV 2.4 GHz or equivalent AMD Athlon®

• 512 MB DDR RAM or above

• 500MB free hard disk space

• 32-bit color display at 800x600 with DirectX 3D support

• DirectX 9.0c or above

Product Overview

1. Power Button

2. Custom Button

3. Battery Indicator

4. Function Indicator

5. Feeding Slot

6. SD Slot

7. USB Slot

8. PC Connection Port

9. Battery Cover

10. Roller Releaser

Indicator Signaling

Stand Along (for scanning)

Indicator Power

LED 1

Battery

LED 2

Function

Status

O O O Power O

On O Green Blink Power On Initial

On Green Orange Battery full and ready

for scan. The le format

is JPEG.

On Green Orange Blink Scanning

On Orange Green Battery is medium and

the le format is PDF.

On Red Red Blink Battery low and no SD

card (or lock) / ash disk

or paper jam.

USB Connect (for recharge battery only or read/copy le)

Indicator Power

LED 1

Battery

LED 2

Function

Status

O Red O Charging battery

O O O Battery fully charged

On Green Orange Battery full and can read

or copy le from PC or

Mac.

On Green Orange Blink Connecting with PC

The battery recharge only when the power is o only.

Use only the mains adapter provided for the base unit.

Installing and Charging Battery

1. Slide open the battery compartment cover.

2. Place the lithium battery as indicated. Follow the polarity indicated on the

scanner.

3. Slide the battery compartment cover back on.

4. Plug the mains adaptor to the scanner.

5. Plug the mains adaptor into the mains socket. Charge the scanner for 14

hours the rst time you charge it.

Battery Status

All the battery status will emit in the Battery Indicator.

Battery power indicator

When the scanner power is on:

• Greenlightindicate: Thebatteryisoffullcapacity

• Orangelightindicate: Thebatteryisofmediumcapacity.

• Redlightindicate: Thebatteryisoflowcapacity.

Charging Battery

When the battery power indicator is light red that mean the battery power

almost empty and need to recharge it.

1. Power o the scanner.

2. Connect scanner to PC USB ports or adaptor and the Battery Indicator

show the charge status as below :

• Redlightindicate: Chargingbattery.

• Blanklightindicate: Thebatteryhasfullycharged.

• The adaptor is for recharge only.

• Fully charged it before to use the scanner.

• Please don’t turn on or scan while battery is charging.

Handling the Batteries

• Improper or incorrect use of batteries may cause corrosion or battery

leakage, which could cause personal injury or damage to property.

• Install the batteries correctly by following the polarity (+ and -) indications

in the battery compartment.

• Use only the types of the batteries which are indicated in this manual.

• Do not install new batteries with used ones and do not mix dierent types

of batteries.

• Do not dispose of the used batteries as domestic waste. Dispose of them in

accordance with local regulations.

The SD card is the high

priority when you insert

the SD card and ash disk

together.

USB

TO PC

USB

TO PC

CARD

Operation

2. Press and hold the button for

about 0.5 seconds. The Function

Indicator green light blinks.

3. Wait until the Function Indicator

stops blinking then change to

orange and stays on to indicate

the scanner is ready.

1. Insert a memory card into the

memory card slot or a ash disk

into the ash disk slot.

Function Indicator

Select the Scan File Format

This scanner support JPG and PDF (B &W) scanned le formats.

1. The default format is JPG and the Function Indicator light orange.

2. Press the button and change the le format to PDF format. The Function

Indicator emit as green.

3. Press the button again and the le format change to JPG and the

indicator emit orange.

The Function Indicator emits patterns represent function status as follows:

Light Function Status

Green Blinks The scanner is power on and initiating.

Orange Steadily on The scanner is ready for use and the le format is JPG.

Green Steadily on The scanner is ready for use and the le format is PDF.

Orange /

Green Blinks

Continuously

• Initializing system and memory card. Please wait

until the initialization process is complete before

using the scanner.

• Busy scanning and storing image les. Please wait

until the process is complete before scanning

another original.

• Sensor cleaning in progress. Please wait until

the process is complete before performing any

operations.

Red Blinks • Paper jam. Press the Custom button for about 0.5

seconds; the scanner will back out the original so

you can remove it from the input slot.

• Memory card error. Remove the memory card to

clear this error status.

• Calibration failed. Error indication only.

No light The scanner is powered o.

Scan an Original

1. Insert your photo, document or name card with the side to be scanned

facing upward and in correct orientation, place the left edge of the original

against the left edge of the feed slot, and then adjust the guide lever so

that it is against the right side of the original. Do not apply any force to the

original.

• Do not remove the memory card or disconnect the power supply

while the indicators are blinking.

• This scanner only supports output images in JPEG (.jpg) and PDF

(.pdf) format, and the date/ time attribute will not be added.

• If the memory card is near full (lower than 1MB), the power

indicator light blinks. Use another card or delete some les on it if

necessary.

• Insert only one original at a time, and insert the next original only

when the previous one is done and the blinking has stopped,

otherwise the scanner may malfunction.

• The scanner will not scan when the power adapter is connected.

2. Gently push the original into the feeding slot and let go when it begins to

feed into the slot.

3. When the scan is completed, the scanner will automatically create a folder

on your memory card or ash disk.

4. If the le format is PDF, another folder will be created.

Picture A4 paper Name Card

Power o the Scanner

After all originals were scanned, press and hold

the button until the indicator blank. Now you

can safely remove the memory card or ash

card from the scanner.

Important:

1. Insert only one photo at a time, and insert the next one only when the

previous one is done, and the indicator light stops blinking. Otherwise, the

scanner may malfunction.

2. The acceptable paper size is 2” x 2” ~ 8.5” x 11. 69”.

3. Do not use the following types of originals for scanning; otherwise the

scanner may malfunction or cause the original to jam in the slot.

• Originalsthickerthan0.5mm

• Originalswitheithersideshorterthan50mm(below2”)

• Originalswithlotsofblackordarkcolors

• Originalswithdarkcolorssurroundingtheedges

• Transparencies(lmstrips,celluloid,etc.)

• Printedimages(picturesonnewspapers,magazines,etc.)

• Softandthinmaterials(thinpaper,cloth,etc.)

• Originalsthatexceedorbelowtheacceptablesize

4. The scanner has a built-in cropping

function that is capable to detect and crop

the edges of an original. The max cropping

size is 1.5mm per edge, as illustrated

below:

Picture

Max.: 1.5mm

Picture

5. If the photo is incautiously skew in the

feeding slot, the four edges of the scanned

image will become dark as illustrated.

Connecting to a Computer

You may use the scanner as a memory card reader by connecting it to the

computer through the USB cable, so that you can freely copy, paste or

delete les to and from the memory card. The images in the card can also be

downloaded to the computer by other computer devices.

Connect the scanner to a computer

Must use the dual plugs of USB cable in the packing to connect scanner with PC.

1. Insert a memory card or ash disk

that contain your scanned images

into the memory card slot.

2. Connect the mini end of the USB

cable (included with scanner) to

the Mini USB connector on the

scanner.

USB

TO PC

3. Power on your PC then connect

the dual plug of USB cable to USB

ports on your PC.

4. Press and hold the Power button

for 0.5 seconds.

USB

TO PC

USB

TO PC

CARD

5. When the scanner connects successfully with a computer, a Removable

Disk (F) (F represents the removable drive letter) will be shown in Windows

Explorer. If a memory card or ash disk is inserted to the scanner, the

Removable Disk will be replaced with the name of the memory card or

ash disk.

6. After scanned, a folder is added to the memory card or ash disk and the

scanned image will be saved in JPEG (or PDF) le format.

7. You can now view or edit the les on the memory card or ash disk using

your own graphic editing software.

Disconnect the scanner from a computer

1. On the Windows System Tray, click the hardware removal icon.

2. Click the ‘Safely remove USB mass Storage device’ message with the

corresponding Drive.

3. When the ‘Safe to Remove Hardware’ message appears, you can safely

remove the scan engine’s USB cable.

The scan function will be disable when the scanner connect to PC

USB port.

Arcsoft BizScanner

This simple application uses advanced OCR technology and scans the images

of your business cards. It quickly and easily captures contact information from

business cards and adds it to the application’s database, saving you a great deal

of time and eort by eliminating the need to manually type in names, phones,

and other key information.

BizScanner also provides convenient tools for you to manage all business cards.

With just a few clicks, you can synchronize the application’s database with other

programs, such as Microsoft Oce Outlook and so on.

Install BizScanner

The BizScanner only support Windows OS.

1. Insert the installation CD into the CD-ROM drive and click ‘BizScanner’ and

start to install BizScanner.

2. Follow the installation wizard step by step.

3. Install completely.

Run BizScanner

There are several ways that you can launch BizScanner:

• Double click ‘BizScanner’ icon on the desktop or right-click the

icon and select “open”.

• Click Start All Programs ArcSoft BizScanner BizScanner.

Start to Use BizScanner

Input Business Cards

Input - Switch to “Input Business Cards” to quickly and easily capture

contact information from business cards.

Input business cards main screen:

Toolbar

The Toolbar provides the following functions for you to input business card

images:

Import from

BizCard Scanner

Import images of business cards from a

professional BizCard scanner. Before using

this function, make sure that a BizCard

scanner is properly connected to your

computer.

Import Import existing images of business cards

from your local disk. Choose “Import from

Folder” or “Import from Files” from the

drop-down list.

Language Select the language of the business card

from the drop-down list. BizScanner

recognizes multilingual business cards.

Thumbnail Display

Displays thumbnails of all imported business cards. Select thumbnail and

detailed contact information of that card is displayed. To remove a specic

business card before importing it to the database, click the Delete icon located

on the bottom right corner of the selected thumbnail.

Contact Information

Displays detailed information of the selected business card. Any characters that

do not appear correct are highlighted. Modify any information and select a

category for that card from the drop-down list. If the card does not t into any of

the existing categories, use the “New Category” button to create one.

The thumbnail of the active business card is also displayed in this area. Use the

“Rotate Left” or “Rotate Right” button if the image is not properly placed.

When all information of the business card is correct, click “Conrm” to add it to

the database.

Manage Business cards

Manage - Switch to “Manage Business Cards” to manage the

application’s database and preview all imported business

cards.

Manage business cards main screen:

Page is loading ...

Logik L4SCAN11 User manual

Logik L4SCAN11 User manual

Logik L4SCAN11 User manual

Related papers

Other documents