Specications
• 2x port USB 2.0 Hub with Card reader
• For micro SD, micro SDHC memory cards
• Data transfer rate up to 480 Mbps
• Dimensions: 42 mm x 18 mm x 20 mm
• Weight: 11.2 g
• Hot Swap, Plug & Play
System requirements
• Windows ME/2000/XP/Vista/7, Mac OS 9.x or above
• PC or notebook with a free USB port
Installation
1. Remove the cap.
2. Put the micro SD or micro SDHC card into the upper slot.
3. Connect the card reader through the USB port with your notebook or PC.
4. The CardReader will be recognized and you can start using the device immediately.
Support Delock
If you have further questions, please contact our customer support: support@delock.de
Final clause
Information and data contained in this manual are subject to change without notice in
advance. Errors and misprints excepted.
Copyright
No part of this user manual may be reproduced, or transmitted for any purpose,
regardless in which way or by which means, electronically or mechanically, without
explicit written approval of Delock.
Edition: 02/2010
91679 2x port USB 2.0 Hub with Card reader
-
1
