DeLOCK 91677 User manual

Specications

• USB 2.0 specication

• For micro SD, micro SDHC memory cards

• Data transfer rate up to 480 Mbps

• Dimensions: 18 mm x 12 mm x 3 mm

• Weight: 2g

• Hot Swap, Plug & Play

System requirements

• Windows ME/2000/XP/Vista/7, Mac OS 9.x or above

• PC or notebook with a free USB port

Installation

1. Remove the cap.

2. Put the micro SD or micro SDHC card into the upper slot.

3. Connect the card reader through the USB port with your notebook or PC.

4. The CardReader will be recognized and you can start using the device immediately.

Support Delock

If you have further questions, please contact our customer support: support@delock.de

Final clause

Information and data contained in this manual are subject to change without notice in

advance. Errors and misprints excepted.

No part of this user manual may be reproduced, or transmitted for any purpose,

regardless in which way or by which means, electronically or mechanically, without

explicit written approval of Delock.

Edition: 02/2010

91677 USB 2.0 Card Reader micro SD/micro SDHC

Download PDF