Verizon LTE Home Internet Quick start guide

Brand: Verizon

Model: LTE Home Internet

Category: Bridges & repeaters

Type: Quick start guide

This manual is also suitable for

LTE Internet

Start

Here

LTE Internet (Installed)

Quick_Start_LTE.indd 1 7/30/14 10:42 AM

Welcome

Thank you for choosing Verizon Wireless LTE Internet (Installed). You

are now connected to America’s fastest 4G Network. This guide will help

you make the most of your new service.

What’s happened up to this point:

• You’ve purchased a great, new broadband service.

• Equipment has been professionally installed and activated.

• The installer showed you how to access My Verizon to manage your

account.

• You know how to check your data usage and customize your alerts online.

If you enrolled in the LTE Internet Protection Plan, it is now

active. (For more information on the Protection Plan, see page 5)

During the installation, the technician has set up the following

equipment:

•

• Power Inserter—provides power to the

LTE Internet Antenna.

• LTE Internet Router—lets you connect devices to

your home network via Wi-Fi or Ethernet connection.

LTE Internet Antenna—brings Verizon 4G

LTE to your home.

Quick_Start_LTE.indd 3 7/30/14 10:42 AM

Router Basics

Front panel

On the front panel of your home router, you can ﬁnd:

• LEDs showing the status of your service.

• The WPS button that allows you to add new wireless devices to your local

network in a swift and easy way, without the need to enter any of your

wireless settings .

Note: Not all devices support WPS. For more information, see “Connecting

devices to your router via Wi-Fi” on page 4.

Status LEDs

WPS

Button

LED Description

Power Indicates the power status of the router.

Internet Indicates the connectivity to the Verizon 4G LTE Network.

Phone 1/Phone 2 Phone service is not supported at this time.

Ethernet Indicates devices are connected via Ethernet.

Wi-Fi Indicates whether or not Wi-Fi is enabled.

Quick_Start_LTE.indd 4 7/30/14 10:42 AM

Back panel

BD F

Item Name Description

A USB Port The USB port was designed for diagnostic purposes only; it

is not intended for customer use.

Therefore, never place a USB-based device into the USB port

of the router under any circumstances. Doing so may damage

the device and will negate its warranty.

B Power

Switch

Allows you to switch your router on/off.

C Power Inlet Location to plug in the power cord.

D Reset

Button

If pressed for 15 seconds, the router will return to its factory

default settings; all changes you have made will be lost.

E LAN Port Allows you to connect your local devices (e.g. computer),

using Ethernet.

F WAN Port Allows you to connect the router to the antenna.

G Phone Port Phone service is not supported at this time.

Quick_Start_LTE.indd 5 7/30/14 10:42 AM

Customizing your router’s settings

Follow these steps to customize the router’s settings (including

changing the Broadcast SSID and WEP/WPA2 password) - For Advanced

Users:

1. Open your web browser and enter 192.168.1.254, (the router’s

default IP address), in the URL bar and press Enter.

2. Type admin in the User Name box and type the Login Password

printed on the back label of your router in the Password box.

3. The router interface will appear.

Connecting devices to your router via Wi-Fi

Option A: Manual Conﬁguration

1. Locate the list of available wireless networks on your device.

2. Select the router SSID (printed on the back of the Router).

3. Type the WEP/WPA2 Key that is printed on the back of the Router

when prompted.

Option B: Via WPS (Wi-Fi Protected Setup)

1. Brieﬂy press the WPS button on the router.

2. The WPS button will blink amber (This indicates that the router is

now searching for wireless devices. You have two minutes to start

WPS on your wireless device.)

3. Start WPS on your wireless device.

4. The router will exchange security settings with the device.

5. When complete, the WPS LED will change to:

• Solid Green = Success

• Blinking Red = The router could not ﬁnd device. Try again.

Quick_Start_LTE.indd 6 7/30/14 10:42 AM

About Your Service

My Verizon

My Verizon lets you monitor your data usage or make adjustments to

your plan at any time. To manage your account, go to verizonwireless.

com/myverizon.

• Sign in with your username and password.

• If you need to register follow these instructions:

• From the MyVerizon homepage, select Register and follow on screen

instructions.

• If you have an email address on ﬁle, you will receive an email with a

link for registration. You must access the link within 3 days.

• If you do not have an email address on ﬁle, we will mail you a letter

with your temporary password and once received you can return to

verizonwireless.com/myverizon to complete your registration.

Once you are registered and signed in to My Verizon, you can manage

your data usage alerts.

• Receive alerts when data used reaches 50%, 75%, 90 % and 100% of

your monthly data allowance as well as 90% of each 1GB overage.

• Account owners will receive email alerts. If you have Verizon Wireless

mobile phone service, you can also receive text alerts.

Protection Plan

• Protect your LTE Internet with a Protection Plan.

• The Verizon Wireless LTE Internet Protection Plan will cover

both equipment issues as well as associated service call charges.

• For a low monthly fee, you get peace of mind and comprehensive support

to ensure you and your family enjoy LTE Internet service.

• The Protection Plan can be added to your account by visiting your

near

est Verizon Wireless Store or calling 800-922-0204. Restrictions

apply.

Quick_Start_LTE.indd 7 7/30/14 10:42 AM

LTE Internet (Installed) Email

To provide additional value, Verizon Wireless is offering LTE

Internet customers up to ﬁve verizon.net email addresses with

webmail service.

Creating an Email Account

1. First time customers register by logging into My Verizon.

2. Once logged in, select your LTE Internet (Installed) line of service.

3. On the My Verizon tab on top, select My Plans and Services.

4. In the My Data Plan section, select the link for Manage Email.

5. Prompts will guide you through selecting a user name (username@

verizon.net), password and accepting the terms and conditions for

the service.

Note: All email user names must be set-up by the primary account holder.

Accessing Email

Any device with an HTML browser can access our webmail interface,

including Smartphones.

1. Access the following link – www.verizonwireless.com/HFmail.

2. Enter user name and password.

3. Email inbox page appears.

Note: Smartphone users can also sync their phone to this email account by

adjusting the settings on their phone. Instruction is speciﬁc to smartphone

operating system.

Quick_Start_LTE.indd 8 7/30/14 10:43 AM

Troubleshooting

If you’re having trouble accessing the Internet, try these steps:

1. Check all connections on the back of the router.

2. Power cycle the antenna by unplugging the power inserter and

plugging it back in.

• Keep unplugged for 1 minute.

• After plugging unit in, allow 3 to 5 minutes for antenna to reboot.

3. Power cycle the router by turning the unit off (Switch on the back).

4. Reboot your device (Computer or other).

Quick_Start_LTE.indd 9 7/30/14 10:43 AM

Router Self-Install

Follow these Self-Installation Instructions if for any reason you need to

replace your router:

1. Router

a. Unplug your router.

b. Disconnect the coaxial cable from the WAN port of your old

router and plug it into your replacement device.

c. Plug in your new router (Keeping the On/Off switch on the back in

the Off position).

2. Power Inserter

a. Locate the power inserter that powers the outdoor antenna

(Labeled with sticker on the bottom of unit).

b. Unplug the power inserter from the outlet (For one minute).

c. Plug the power inserter back into the outlet.

3. Router

a. Wait 3 to 5 minutes after plugging in the power inserter and then

set the On/Off switch on your router to ON.

To return your old Router

Please follow these instructions to return your old router:

1. Using the shipping box, pack only the defective router and the

router’s power supply for return.

2. Tape the box securely and afﬁx the pre-paid UPS return shipping

label to the outside of the box.

3. Drop the labeled shipping box at the nearest UPS dropbox or center.

Retain your tracking receipt.

Quick_Start_LTE.indd 10 7/30/14 10:43 AM

To read the full Terms of Service for Verizon Wireless LTE

Internet and get other useful information about the product, visit

verizonwireless.com/lteinternetinstalled.

Quick_Start_LTE.indd 11 7/30/14 10:43 AM

Notes

Quick_Start_LTE.indd 12 7/30/14 10:43 AM

Notes

Quick_Start_LTE.indd 13 7/30/14 10:43 AM

Notes

Quick_Start_LTE.indd 14 7/30/14 10:43 AM

verizonwireless.com

*DSL3698495D*

DSL3698495D

DMS-QIG-20110902-0003 v5.0. Printed in Vietnam.

verizonwireless.com

Quick_Start_LTE.indd 16 7/30/14 10:43 AM

Verizon LTE Home Internet Quick start guide

Brand: Verizon

Model: LTE Home Internet

Category: Bridges & repeaters

Type: Quick start guide

This manual is also suitable for

LTE Internet

Download PDF

report

Verizon LTE Home Internet Quick start guide

This manual is also suitable for

Verizon LTE Home Internet Quick start guide

Related papers

Other documents