Amzer AMZ20618 User manual

Category
Holders
Type
User manual
PEDESTALS, CRADLES & HOLDERS
CAR M
o
UNT
Customer Care
USA 1-866-663-2693
UK (44)1925-596205
Sugar Land, TX 77478, USA
Designed in USA | Made in China
Copyright © 2003-12 Amzer.com
INDIA +91-11-49367001
www.amzer.com
With a socket wrench, loosen the passenger seat track bolt, insert
the seat track bolt bracket, and retighten the seat track bolt.
Step 1.
Screw the mount bracket to the mount. Depending on your
vehicle, you may need to change the orientation of the bracket.
oor/console bracket with screws.
Step 1.
Step 2.
Adjust the steel shaft by bending with both hands to the
desired location of the male dual T head.
Step 1.
Passenger Seat Bolt Mounting
Alternative Floor or Console Mounting
oor / console mount
oor or console. This will require drilling into your
vehicle’s interior surface.
For a simple mount that can be easily moved to another vehicle, install
using the passenger seat track bolt.
Safety Precautions
Do not install Amzer products over an air bag cover or within the air
bag deployment zone. Amzer assumes no responsibility of liability for
injury or death as a result of car crashes and / or air bag deployment.
Amzer is not responsible for any damages caused to your car, your
device, or yourself due to the installation or use of this pedestal mount.
!
!
oor, or console will permanently damage
the vehicle. Use caution and consult a mobile install professional
to avoid drilling into the gas tank, electrical system or other highly
sensitive vehicle components.
1
2
Pedestal Head Adjustments
3
Do not place mount in or near an air bag deployment zone or
where it will obstruct view of the road.
!
Do not place mount in or near an air bag deployment zone or
where it will obstruct view of the road.
!
Package Contents:
(1) 15 Steel Gooseneck Floor Mount
(2) Smartphone Holder
1
2
Mount Bracket
Floor Bracket
Attach a holder to the oor or console mount by
inserting the dual T-tabs on the mount head into the
dual T-slots on the back of the holder.
Step 1.
Attach Holder to Gooseneck Mount
Required Tools for Installation:
1. Socket wrench
oor or console mounting
| 15 inch Steel Gooseneck Floor Mount
  • Page 1 1

Amzer AMZ20618 User manual

Category
Holders
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI