Amzer AMZ83813 User manual

AMZ83813
Amzer
Brand
Amzer
Model
AMZ83813
Category
Holders
Type
User manual

Amzer AMZ83813 is a universal cup holder mount for smartphones, designed for easy installation and use in most vehicles. It features a sturdy cup holder base with an adjustable gooseneck shaft, allowing you to position your phone at the perfect viewing angle. The included dual T-slot holder securely attaches to the shaft, accommodating a wide range of smartphones. Optional self-adhesive side support pads are provided for oversize cup holders or adjustable cup holders. Please ensure safe placement, avoiding air bag deployment zones or obstructed views of the road.

Amzer AMZ83813 is a universal cup holder mount for smartphones, designed for easy installation and use in most vehicles. It features a sturdy cup holder base with an adjustable gooseneck shaft, allowing you to position your phone at the perfect viewing angle. The included dual T-slot holder securely attaches to the shaft, accommodating a wide range of smartphones. Optional self-adhesive side support pads are provided for oversize cup holders or adjustable cup holders. Please ensure safe placement, avoiding air bag deployment zones or obstructed views of the road.

PEDESTALS, CRADLES & HOLDERS
CAR M
o
UNT
Customer Care
USA 1-866-290-5798
UK 44-1925-596205
Sugar Land, TX 77478, USA
Designed in USA | Made in China
Copyright © 2003-12 Amzer.com
INDIA 91-11-49367011
www.amzer.com
83813 | Universal Cup Holder Mount
!
Safety Precautions
Do not install Amzer products over an air bag cover or within the air
bag deployment zone. Amzer assumes no responsibility of liability
for injury or death as a result of car crashes and / or air bag
deployment.
Amzer is not responsible for any damages caused to your car, your
device, or yourself due to the installation or use of this pedestal mount.
Phone Holder Attachment
Adjust the angle of the dual T head by tightening the adjustment
nut at the top of the cup holder shaft (A).
Install any Amzer dual T-slot holder to the shaft by inserting the
dual T-tabs (B) on the shaft into the T-slots (C) on on the back of
the holder.
Step 1.
Step 2.
Cup Holder Mounting
Connect the gooseneck shaft (A) to the cup holder base (B) by
aligning the groove on the base to the ridge inside of the bottom
of the shaft.
Place the Universal Cup Holder Mount into the designated cup
holder in the vehicle
. Adjust the thumb wheel adjuster (C) to open
For oversize cup holder openings or the adjustable “pop out” cup
holders use the optional self-adhesive side support pads (D). Install
the pads by removing the adhesive backing and placing it on the
Step 1.
Step 2.
Step 3.
Package Contents:
(1) Cup Holder Mount
(2) Smartphone Holder
CLOSE
OPEN
(B) Cup Holder Base
(A) Cup Holder
Neck
(C) Thumb wheel
adjustment
knob
(D) Optional
support
pads
CLOSE
OPEN
(B) Cup Holder
Shaft T-tabs
(C) T-slots
(A) Angle
Adjustment
Nut
No tools required for installation.
Note: mount may not work with adjustable, “pop out” cup holders or oversize
cup holder openings found in full-size pickup trucks.
Do not place mount in or near an air bag deployment zone or where it
will obstruct view of the road.
!
  • Page 1 1

Amzer AMZ83813 User manual

AMZ83813
Amzer
Brand
Amzer
Model
AMZ83813
Category
Holders
Type
User manual

Amzer AMZ83813 is a universal cup holder mount for smartphones, designed for easy installation and use in most vehicles. It features a sturdy cup holder base with an adjustable gooseneck shaft, allowing you to position your phone at the perfect viewing angle. The included dual T-slot holder securely attaches to the shaft, accommodating a wide range of smartphones. Optional self-adhesive side support pads are provided for oversize cup holders or adjustable cup holders. Please ensure safe placement, avoiding air bag deployment zones or obstructed views of the road.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents