Sweex Wireless 150N Nano Adapter USB Owner's manual

Brand: Sweex

Model: Wireless 150N Nano Adapter USB

Category: Networking cards

Type: Owner's manual

This manual is also suitable for

LW154

ENglISH VErSIoN

LW154 Wireless 150N Nano Adapter USB

Please notice! On the included CD-ROM you will find the Setup Wizard. This easy install procedure will show you how

to setup the adapter step-by-step.

• DonotexposetheWireless150NNanoAdapterUSBtoextremetemperatures.Donotplacethedeviceindirectsunlightorinthedirectvicinity

ofheatingelements.

• DonotusetheWireless150NNanoAdapterUSBinextremelymoistordustysurroundings.

• Protectthedeviceagainstpowerfulshocksandfalls–theymaydamagetheinternalelectronics.

• Neverattempttoopenthedeviceyourself,therearenoserviceablepartsinside.Openingthedevicewillcausethewarrantytolapse.

Package contents

In this package you will find:

• Wireless150NNanoAdapterUSB

• CDwithdriver,softwareandthismanual

Ifyoufindthatanyofthepackagecontentsaremissing,pleasereturnthepackagetothesalespointwhereitwasbought.

Terminology list

This manual will contain a number of technical terms. It is important to know what they mean before you begin

installing and configuring the adapter.

• Adapter:ThisistheWireless150NNanoAdapterUSB,theproductyouhavejustbought.

• Wirelessnetwork:WirelessnetworksarebasedontheWi-Fistandard.TheadapterenablesyoutoconnecttoWi-Finetworksataspeedofupto

150Mbps,providedthatthenetworksupportsthisspeed(orhigher)

• (wireless)Adapter,modem,accesspoint:Thesearedevices(amongstothers)cantransmitawirelessnetworksignal.

• Wirelesssecurity:Wirelesssecurityisaformofprotectionforwirelessnetworksthatallowsonlyauthorizeddevicesaccesstothenetworkand

preventseavesdropping.Thereareseveraldifferentformsofwirelesssecurity,asisexplainedfurtheroninthismanual.

Installation Windows XP, Vista and 7

PlacetheSweexCDintheCDplayer,click“DriversandSoftware”andfollowtheinstructionsonscreen.

ENglISH VErSIoN

Setting up the wireless network

How does it work?

Tocreateawirelessnetworkyouneedawirelessadapter,wirelessmodemorWi-Fiaccesspoint.Thewirelessadapter,modemoraccesspoint

distributesthewirelessnetwork.Thenameofthisnetwork,alsocalledtheSSID,isdependantonyourwirelessadapter,modemoraccesspointand

isdifferentpertypeorbrand.Youcanoftenchangethename,soyou

caneasilyidentifyyourownwirelessnetwork.

Security

Awirelessnetworkiscomparablewithradiosignals.However,awirelessnetworkathomedoesnothavesuchalongrange.Therangeofahome

networkoftenhasarangeof20to30meters.Thismeansthatneighboursandpassers-bycanalsouseyournetwork.Thiswaytheycansurfon

yourinternetconnectionandpossiblyaccessyoursharedfolders

andfilesonyournetworkunpunished.Thatiswhyitisrecommendedtosecureyourwirelessnetwork.Thissecurityisconfiguredonthedevicethat

transmitsthenetwork.Inmostcasesthisisthewirelessadapter,modemoraccesspoint.

BymeansofaWEPorWPAsecuritycodeyoucansecureyournetwork.Thiscodeisalsocalledthenetworkkey.Enterthiscodeoneverycomputer

thatwantstoconnecttothesecurednetwork.Onlywiththiskeyyoucanbepartofthe

network.Ifyoudidnotenterthenetworkkeyyourselfintheadapterormodem,asktheinstaller,manufacturer,supplierorproviderforthiscode.

WPS (Wi-Fi Protected Setup)

Securingthewirelessnetworkintheadaptercanbedoneintwoways.Thetrustedmanualway(WEP,WPAandWPA2),whereyoudetermine

andenteryourownnetworkkey,orwiththeWPS(Wi-FiProtectedSetup)function,wherethemodem,adapteroraccesspointandthecomputer

“agree“onaWPA(2)networkkeyanduseitautomaticallywithonepushofabuttontosecurethenetwork.Thisfunctiononlyworkswitha

modem,adapteroraccesspointthatalsosupportsWPS.

Note:WindowsVistafromSP2onwardsandWindows7alreadysupportWPSout-of-the-box.WhenconnectingtoaWPSsecurednetwork,simply

followtheinstructionsonscreen.TheproceduredescribedbelowisforWindowsXPonly

Connecting and securing with WPS

AfteractivatingtheWPSfunctionbepressingtheWPSbuttonontheadapterorviatheWPSconfiguration,youhavethecomputerscanforthe

automaticallygeneratednetworkkey,thenetworkissecuredautomatically.

• EnsureyouhavetheUtilityinstalledonyourcomputer.

• StarttheWPSfunctiononthemodem,adapteroraccesspoint.

• Right-clickthe“SweexWirelessUtility”iconandchoose“OpenUtility”.

ENglISH VErSIoN

TheSweexUtilitywillappear.Clickonthe“WPSSetting”tab,youshouldseethefollowingscreen:

ToconnecttoaWPSsecurednetwork,firstclickthe“PushButtonConfig(PBC)”button,thenpushtheWPSbuttononyourrouter.Theutilitywill

automaticallyfindyournetworkandestablishaWPSsecuredconnctiontoit.AfteraWPSconectionhasbeensuccessfullyestablished,youwillsee

itinthe“Profile”tab.

Connecting to a wireless network

Windows XP

Right-clickonyourwirelessadapter’siconatthebottomrightofyourscreenandclick“ViewAvailableWirelessNetworks”:

Awindowtitled“Chooseawirelessnetwork”willappear.Inthiswindow,selectyournetwork,clickthe“Connect”buttonandfollowtheinstructions

onscreen:

ENglISH VErSIoN

Windows XP with Sweex Utility:

Right-clickonthe“SweexWirelessUtility”iconatthebottomrightofyourscreenandclick“OpenUtility”.

Clickonthe“SiteSurvey”tab,selectyournetwork,clickthe“Connect”buttonandfollowtheinstructionsonscreen:

Note:Incasethenetworkyou’reconnectingtoissecured,donotforgettoenterthesecuritykey!

Windows Vista:

RightclickontheNetwork&SharingCentericoninthebottomrightofyourscreen,andclick“Connecttoanetwork”:

Awindowtitled“Connecttoanetwork”willappear.Inthiswindow,selectyournetwork,clickthe“Connect”buttonandfollowtheinstructionson

screen:

Note:Ifyouseearedcrossnearthenetworkandthetext:“Thesettingssavedonthiscomputerforthenetworkdonotmatchtherequirementsof

thenetwork”,pleaserefertothetroubleshootingsectionofthismanual.

ENglISH VErSIoN

Windows 7:

Windows7willindicatewhenwirelessnetworksareavailable.Youcanrecognisethisbythefollowingiconinthebottom-rightofyourscreen:

Note:Ifyouseeasmallredcrossthroughtheicon,nonetworksareinrangeofyourcomputer.Pleaseconsultthetroubleshootingsectionofthis

manualifthisisthecase.

Clicktheiconandalistofwirelessnetworkswillappear,selectthe“SweexLW150”network,checkthe“ConnectAutomatically”checkbox,click

“Connect”andfollowtheinstructionson-screen:

Note:Ifyouseearedcrossnexttothenetworkandareunabletoconnect,pleaserefertothetroubleshootingsectionofthismanual.

Troubleshooting

Thischapterofthemanualwillexplainanumberofcommonissuesthatyoumayrunintoandpossiblesolutions.

• IcanconnecttoanetworkbutIcannotaccesstheinternetorothercomputersonthenetwork

• ThisissuemayarisefromincorrectIPsettingsonyourcomputer.Youcancheckandadjustyoursettingsasfollows:

ENglISH VErSIoN

Windows XP

1 Clickthestartbuttonatthebottomrightofyourscreenandclick“ControlPanel”

2 Inthecontrolpanel,click“NetworkandInternetConnectionsandopenthe“NetworkConnections”icon.IfyourcontrolpanelisinClassicView,

youmayopenthe“NetworkConnections”iconstraightaway.

3 RightclickthefirstconnectedLANorHigh-SpeedInternetConnection,inthisexamplethe“LocalAreaConnection”,andclick“Properties”from

thecontextmenu.Ifyouhavemultipleconnectedconnections,repeatsteps3to6foreachconnection.

ENglISH VErSIoN

4 Theconnection’spropertywindowappears.Inthiswindows,selectthe“InternetProtocol”fromthelistofitemsandclickthe“Properties”

Button:

5 TheInternetProtocol’spropertywindowappears.Inthiswindow,ensurethatbothsettingsaresetto“Obtainautomatically”:

6 Confirmthesettingsbyclicking“OK”.ThenetworksettingsforXParenowproperlyconfiguredforyouradapter.

ENglISH VErSIoN

Windows Vista

1 Clickthestartbuttonatthebottomrightofyourscreenandclick“ControlPanel”

2 IntheControlPanel,click“Viewnetworkstatusandtasks”.IfyourControlPanelisinclassicview,openthe“NetworkandSharingCenter”icon:

3 TheNetworkandSharingCenterwindowshouldnowopen.

IntheNetworkandSharingCenter,click“Managenetworkconnections”inthebarontheleftside:

ENglISH VErSIoN

4 RightclickthefirstconnectedLANorHigh-SpeedInternetConnection,inthisexamplethe“LocalAreaConnection”,andclick“Properties”from

thecontextmenu.Ifyouhavemultipleconnectedconnections,repeatsteps4to7foreachconnection:

5 Theconnection’spropertywindowappears.Inthiswindows,selectthe“InternetProtocolVersion4”fromthelistofitemsandclickthe

“Properties”Button:

6 TheInternetProtocolVersion4’spropertywindowappears.Inthiswindow,ensurethatbothsettingsaresetto“Obtainautomatically”:

7 Confirmthesettingsbyclicking“OK”.ThenetworksettingsforVistaarenowproperlyconfiguredforyouradapter.

ENglISH VErSIoN

Windows 7

1 Clickthestartbuttonatthebottomrightofyourscreenandclick“ControlPanel”

2 IntheControlPanel,click“Viewnetworkstatusandtasks”.IfyourControlPanelisiniconview,openthe“NetworkandSharingCenter”icon:

3 TheNetworkandSharingCenterwindowshouldnowopen.

IntheNetworkandSharingCenter,click“Changeadaptersettings”inthebarontheleftside:

ENglISH VErSIoN

4 Rightclickthefirstconnectedconnection,inthisexamplethe“LocalAreaConnection”,andclick“Properties”fromthecontextmenu.Ifyouhave

multipleconnectedconnections,repeatsteps4to7foreachconnection:

5 Theconnection’spropertywindowappears.Inthiswindows,selectthe“InternetProtocolVersion4”fromthelistofitemsandclickthe

“Properties”Button:

6 TheInternetProtocolVersion4’spropertywindowappears.Inthiswindow,ensurethatbothsettingsaresetto“Obtainautomatically”:

7 Confirmthesettingsbyclicking“OK”.ThenetworksettingsforWindows7arenowproperlyconfiguredforyouradapter.

ENglISH VErSIoN

• IappeartobeconnectedbutInternetExplorerstilldisplaysanerrormessage“InternetExplorercannotdisplaythe

webpage” or similar.

• Thisproblemmayarisefromincorrectproxyserversettings.Youcanadjustthesesettingsasfollows:

1 InInternetExplorer,clickthe“Tools”menuoriconandchose“InternetOptions”.

 2 The“InternetOptions”windowwillnowopen.

 3 Inthiswindow,clickthe“Connections”tabandinthistab,the“LANSettings”button.

 4 The“LANSettings”windowwillnowopen.Ensurethatallcheckboxesareuncheckedandconfirmthesettingsbyclicking“OK”

ENglISH VErSIoN

• IhaveWindowsVistaandIgettheerrormessage“thesettingssavedonthiscomputerforthenetworkdonot

match the requirements of the network” when I try to connect. wirelessly.

• Thisproblemcanbesolvedasfollows:

1 IntheControlPanel,click“Viewnetworkstatusandtasks”.IfyourControlPanelisinclassicview,openthe“NetworkandSharing

Center”icon:

 2 TheNetworkandSharingCenterwindowshouldnowopen.

IntheNetworkandSharingCenter,click“Managewirelessnetworks”inthebarontheleftside:

 3 TheManageWirelessNetworkswindownowopens.Inthiswindow,selecttheconflictingnetworkandclick“Delete”.Afterthenetwork

hasbeendeleted,youcanclosethewindowandfollowthestepsdescribedinthe“Connectingtoawirelessnetwork”sectionofthe

manual.

ENglISH VErSIoN

• IhaveWindows7andIcannotconnecttomywirelessnetwork.Aredcrossisdisplayednexttothenetwork

• Thisproblemcanbesolvedasfollows:

1 ClicktheNetworkandSharingCentericoninthebottomrightofyourscreen:

 2 Nextclick“OpenNetworkandSharingCenter”:

 3 IntheNetworkandSharingCenter,click“Managewirelessnetworks”:

 4 Thefollowingwindowwillappear,rightclickthenetworkthatwasindicatedwitharedcrossinstep2andclick“Removenetwork”:

 5 Afterthenetworkhasbeenremoved,youcanclosethewindowandfollowthestepsdescribedinthe“Connectingtoawirelessnetwork”

sectionofthemanual.

ENglISH VErSIoN

Sweex Wireless 150N Nano Adapter USB Owner's manual

Brand: Sweex

Model: Wireless 150N Nano Adapter USB

Category: Networking cards

Type: Owner's manual

This manual is also suitable for

LW154

Download PDF

report

Sweex Wireless 150N Nano Adapter USB Owner's manual

This manual is also suitable for

Sweex Wireless 150N Nano Adapter USB Owner's manual

Related papers

Other documents