Sweex LW154, Wireless 150N Nano Adapter USB Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the Sweex LW154 Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
ENglISH VErSIoN
2
LW154 Wireless 150N Nano Adapter USB
Please notice! On the included CD-ROM you will find the Setup Wizard. This easy install procedure will show you how
to setup the adapter step-by-step.
• DonotexposetheWireless150NNanoAdapterUSBtoextremetemperatures.Donotplacethedeviceindirectsunlightorinthedirectvicinity
ofheatingelements.
• DonotusetheWireless150NNanoAdapterUSBinextremelymoistordustysurroundings.
• Protectthedeviceagainstpowerfulshocksandfalls–theymaydamagetheinternalelectronics.
• Neverattempttoopenthedeviceyourself,therearenoserviceablepartsinside.Openingthedevicewillcausethewarrantytolapse.
Package contents
In this package you will find:
• Wireless150NNanoAdapterUSB
• CDwithdriver,softwareandthismanual
Ifyoufindthatanyofthepackagecontentsaremissing,pleasereturnthepackagetothesalespointwhereitwasbought.
Terminology list
This manual will contain a number of technical terms. It is important to know what they mean before you begin
installing and configuring the adapter.
• Adapter:ThisistheWireless150NNanoAdapterUSB,theproductyouhavejustbought.
• Wirelessnetwork:WirelessnetworksarebasedontheWi-Fistandard.TheadapterenablesyoutoconnecttoWi-Finetworksataspeedofupto
150Mbps,providedthatthenetworksupportsthisspeed(orhigher)
• (wireless)Adapter,modem,accesspoint:Thesearedevices(amongstothers)cantransmitawirelessnetworksignal.
• Wirelesssecurity:Wirelesssecurityisaformofprotectionforwirelessnetworksthatallowsonlyauthorizeddevicesaccesstothenetworkand
preventseavesdropping.Thereareseveraldifferentformsofwirelesssecurity,asisexplainedfurtheroninthismanual.
Installation Windows XP, Vista and 7
PlacetheSweexCDintheCDplayer,click“DriversandSoftware”andfollowtheinstructionsonscreen.
ENglISH VErSIoN
3
Setting up the wireless network
How does it work?
Tocreateawirelessnetworkyouneedawirelessadapter,wirelessmodemorWi-Fiaccesspoint.Thewirelessadapter,modemoraccesspoint
distributesthewirelessnetwork.Thenameofthisnetwork,alsocalledtheSSID,isdependantonyourwirelessadapter,modemoraccesspointand
isdifferentpertypeorbrand.Youcanoftenchangethename,soyou
caneasilyidentifyyourownwirelessnetwork.
Security
Awirelessnetworkiscomparablewithradiosignals.However,awirelessnetworkathomedoesnothavesuchalongrange.Therangeofahome
networkoftenhasarangeof20to30meters.Thismeansthatneighboursandpassers-bycanalsouseyournetwork.Thiswaytheycansurfon
yourinternetconnectionandpossiblyaccessyoursharedfolders
andfilesonyournetworkunpunished.Thatiswhyitisrecommendedtosecureyourwirelessnetwork.Thissecurityisconfiguredonthedevicethat
transmitsthenetwork.Inmostcasesthisisthewirelessadapter,modemoraccesspoint.
BymeansofaWEPorWPAsecuritycodeyoucansecureyournetwork.Thiscodeisalsocalledthenetworkkey.Enterthiscodeoneverycomputer
thatwantstoconnecttothesecurednetwork.Onlywiththiskeyyoucanbepartofthe
network.Ifyoudidnotenterthenetworkkeyyourselfintheadapterormodem,asktheinstaller,manufacturer,supplierorproviderforthiscode.
WPS (Wi-Fi Protected Setup)
Securingthewirelessnetworkintheadaptercanbedoneintwoways.Thetrustedmanualway(WEP,WPAandWPA2),whereyoudetermine
andenteryourownnetworkkey,orwiththeWPS(Wi-FiProtectedSetup)function,wherethemodem,adapteroraccesspointandthecomputer
“agree“onaWPA(2)networkkeyanduseitautomaticallywithonepushofabuttontosecurethenetwork.Thisfunctiononlyworkswitha
modem,adapteroraccesspointthatalsosupportsWPS.
Note:WindowsVistafromSP2onwardsandWindows7alreadysupportWPSout-of-the-box.WhenconnectingtoaWPSsecurednetwork,simply
followtheinstructionsonscreen.TheproceduredescribedbelowisforWindowsXPonly
Connecting and securing with WPS
AfteractivatingtheWPSfunctionbepressingtheWPSbuttonontheadapterorviatheWPSconfiguration,youhavethecomputerscanforthe
automaticallygeneratednetworkkey,thenetworkissecuredautomatically.
• EnsureyouhavetheUtilityinstalledonyourcomputer.
• StarttheWPSfunctiononthemodem,adapteroraccesspoint.
• Right-clickthe“SweexWirelessUtility”iconandchoose“OpenUtility”.
ENglISH VErSIoN
4
TheSweexUtilitywillappear.Clickonthe“WPSSetting”tab,youshouldseethefollowingscreen:
ToconnecttoaWPSsecurednetwork,firstclickthe“PushButtonConfig(PBC)”button,thenpushtheWPSbuttononyourrouter.Theutilitywill
automaticallyfindyournetworkandestablishaWPSsecuredconnctiontoit.AfteraWPSconectionhasbeensuccessfullyestablished,youwillsee
itinthe“Profile”tab.
Connecting to a wireless network
Windows XP
Right-clickonyourwirelessadapter’siconatthebottomrightofyourscreenandclick“ViewAvailableWirelessNetworks”:
Awindowtitled“Chooseawirelessnetwork”willappear.Inthiswindow,selectyournetwork,clickthe“Connect”buttonandfollowtheinstructions
onscreen:
ENglISH VErSIoN
5
Windows XP with Sweex Utility:
Right-clickonthe“SweexWirelessUtility”iconatthebottomrightofyourscreenandclick“OpenUtility”.
Clickonthe“SiteSurvey”tab,selectyournetwork,clickthe“Connect”buttonandfollowtheinstructionsonscreen:
Note:Incasethenetworkyou’reconnectingtoissecured,donotforgettoenterthesecuritykey!
Windows Vista:
RightclickontheNetwork&SharingCentericoninthebottomrightofyourscreen,andclick“Connecttoanetwork”:
Awindowtitled“Connecttoanetwork”willappear.Inthiswindow,selectyournetwork,clickthe“Connect”buttonandfollowtheinstructionson
screen:
Note:Ifyouseearedcrossnearthenetworkandthetext:“Thesettingssavedonthiscomputerforthenetworkdonotmatchtherequirementsof
thenetwork”,pleaserefertothetroubleshootingsectionofthismanual.
ENglISH VErSIoN
6
Windows 7:
Windows7willindicatewhenwirelessnetworksareavailable.Youcanrecognisethisbythefollowingiconinthebottom-rightofyourscreen:
Note:Ifyouseeasmallredcrossthroughtheicon,nonetworksareinrangeofyourcomputer.Pleaseconsultthetroubleshootingsectionofthis
manualifthisisthecase.
Clicktheiconandalistofwirelessnetworkswillappear,selectthe“SweexLW150”network,checkthe“ConnectAutomatically”checkbox,click
“Connect”andfollowtheinstructionson-screen:
Note:Ifyouseearedcrossnexttothenetworkandareunabletoconnect,pleaserefertothetroubleshootingsectionofthismanual.
Troubleshooting
Thischapterofthemanualwillexplainanumberofcommonissuesthatyoumayrunintoandpossiblesolutions.
• IcanconnecttoanetworkbutIcannotaccesstheinternetorothercomputersonthenetwork
• ThisissuemayarisefromincorrectIPsettingsonyourcomputer.Youcancheckandadjustyoursettingsasfollows:
ENglISH VErSIoN
7
Windows XP
1 Clickthestartbuttonatthebottomrightofyourscreenandclick“ControlPanel”
2 Inthecontrolpanel,click“NetworkandInternetConnectionsandopenthe“NetworkConnections”icon.IfyourcontrolpanelisinClassicView,
youmayopenthe“NetworkConnections”iconstraightaway.
3 RightclickthefirstconnectedLANorHigh-SpeedInternetConnection,inthisexamplethe“LocalAreaConnection”,andclick“Properties”from
thecontextmenu.Ifyouhavemultipleconnectedconnections,repeatsteps3to6foreachconnection.
ENglISH VErSIoN
8
4 Theconnection’spropertywindowappears.Inthiswindows,selectthe“InternetProtocol”fromthelistofitemsandclickthe“Properties”
Button:
5 TheInternetProtocol’spropertywindowappears.Inthiswindow,ensurethatbothsettingsaresetto“Obtainautomatically”:
6 Confirmthesettingsbyclicking“OK”.ThenetworksettingsforXParenowproperlyconfiguredforyouradapter.
ENglISH VErSIoN
9
Windows Vista
1 Clickthestartbuttonatthebottomrightofyourscreenandclick“ControlPanel”
2 IntheControlPanel,click“Viewnetworkstatusandtasks”.IfyourControlPanelisinclassicview,openthe“NetworkandSharingCenter”icon:
3 TheNetworkandSharingCenterwindowshouldnowopen.
IntheNetworkandSharingCenter,click“Managenetworkconnections”inthebarontheleftside:
ENglISH VErSIoN
10
4 RightclickthefirstconnectedLANorHigh-SpeedInternetConnection,inthisexamplethe“LocalAreaConnection”,andclick“Properties”from
thecontextmenu.Ifyouhavemultipleconnectedconnections,repeatsteps4to7foreachconnection:
5 Theconnection’spropertywindowappears.Inthiswindows,selectthe“InternetProtocolVersion4”fromthelistofitemsandclickthe
“Properties”Button:
6 TheInternetProtocolVersion4’spropertywindowappears.Inthiswindow,ensurethatbothsettingsaresetto“Obtainautomatically”:
7 Confirmthesettingsbyclicking“OK”.ThenetworksettingsforVistaarenowproperlyconfiguredforyouradapter.
ENglISH VErSIoN
11
Windows 7
1 Clickthestartbuttonatthebottomrightofyourscreenandclick“ControlPanel”
2 IntheControlPanel,click“Viewnetworkstatusandtasks”.IfyourControlPanelisiniconview,openthe“NetworkandSharingCenter”icon:
3 TheNetworkandSharingCenterwindowshouldnowopen.
IntheNetworkandSharingCenter,click“Changeadaptersettings”inthebarontheleftside:
ENglISH VErSIoN
12
4 Rightclickthefirstconnectedconnection,inthisexamplethe“LocalAreaConnection”,andclick“Properties”fromthecontextmenu.Ifyouhave
multipleconnectedconnections,repeatsteps4to7foreachconnection:
5 Theconnection’spropertywindowappears.Inthiswindows,selectthe“InternetProtocolVersion4”fromthelistofitemsandclickthe
“Properties”Button:
6 TheInternetProtocolVersion4’spropertywindowappears.Inthiswindow,ensurethatbothsettingsaresetto“Obtainautomatically”:
7 Confirmthesettingsbyclicking“OK”.ThenetworksettingsforWindows7arenowproperlyconfiguredforyouradapter.
ENglISH VErSIoN
13
• IappeartobeconnectedbutInternetExplorerstilldisplaysanerrormessage“InternetExplorercannotdisplaythe
webpage” or similar.
• Thisproblemmayarisefromincorrectproxyserversettings.Youcanadjustthesesettingsasfollows:
1 InInternetExplorer,clickthe“Tools”menuoriconandchose“InternetOptions”.
2 The“InternetOptions”windowwillnowopen.
3 Inthiswindow,clickthe“Connections”tabandinthistab,the“LANSettings”button.
4 The“LANSettings”windowwillnowopen.Ensurethatallcheckboxesareuncheckedandconfirmthesettingsbyclicking“OK”
ENglISH VErSIoN
14
• IhaveWindowsVistaandIgettheerrormessage“thesettingssavedonthiscomputerforthenetworkdonot
match the requirements of the network” when I try to connect. wirelessly.
• Thisproblemcanbesolvedasfollows:
1 IntheControlPanel,click“Viewnetworkstatusandtasks”.IfyourControlPanelisinclassicview,openthe“NetworkandSharing
Center”icon:
2 TheNetworkandSharingCenterwindowshouldnowopen.
IntheNetworkandSharingCenter,click“Managewirelessnetworks”inthebarontheleftside:
3 TheManageWirelessNetworkswindownowopens.Inthiswindow,selecttheconflictingnetworkandclick“Delete”.Afterthenetwork
hasbeendeleted,youcanclosethewindowandfollowthestepsdescribedinthe“Connectingtoawirelessnetwork”sectionofthe
manual.
ENglISH VErSIoN
15
• IhaveWindows7andIcannotconnecttomywirelessnetwork.Aredcrossisdisplayednexttothenetwork
• Thisproblemcanbesolvedasfollows:
1 ClicktheNetworkandSharingCentericoninthebottomrightofyourscreen:
2 Nextclick“OpenNetworkandSharingCenter”:
3 IntheNetworkandSharingCenter,click“Managewirelessnetworks”:
4 Thefollowingwindowwillappear,rightclickthenetworkthatwasindicatedwitharedcrossinstep2andclick“Removenetwork”:
5 Afterthenetworkhasbeenremoved,youcanclosethewindowandfollowthestepsdescribedinthe“Connectingtoawirelessnetwork”
sectionofthemanual.
ENglISH VErSIoN
16
ENglISH VErSIoN
17
/