C2/C2C Fingerprint&Card Time Clock Operation Guide
Terminal atuomaticly power on when electricfied, Input
Administrator ID and Password to enter the management menu.
Menu List:
RJ11
RJ45
TCP/IP
USB/Power
Place finger in the center of the sensor.
Place finger flatly and smoothly
on the sensor.
Finger not placed on the
center of the sensor
Use fingertip
Finger placed inclined
6. Function Key
7. Menu/Back Key
8. Confirm Key
V1.2
Correct method : Incorrect method :
Enter management menu: Input ID“0”and press[OK], Input default management password ‘12345’ and press[OK] enter
management menu.
Press [OK]Press [OK]
08-07-2011 09:46:15PM Press M to Access Menu
MON
PM
IN
4609
Enter ID
Menu/Exit
ID＃
0
08-07-2011 09:46:30PM
Enter Password
Menu/Exit
ID＃
0
08-07-2011 09:47:15PM
Password
*****
菜单管理-用户管理
Main Menu - Manage User
Select Menu
Search RecordClock Setup Clock Information
Comm.SetupManage User Pen Drive
M=Return OK=Enter08-07-2011 09:47:40PM
Set Communication parameter:
Input administrator passwordInput administrator ID Select [Comm.Setup] Set communication parameter, Press[M] to exit and save
Real Time
Comm.
IP Address
Server IP
Mask
Gateway
Disable
TCP/IP Client
192.168.000.218
192.168.000.007
251.155.255.000
192.168.000.001
菜单管理-用户管理
Main Menu - Manage User
Search RecordClock Setup Clock Information
Comm.SetupManage User Pen Drive
Menu/Exit Admin Verify
ID
0
08-07-2011 09:47:15PM
Password
*****
Menu/Exit Admin Verify
ID
0
08-07-2011 09:46:30PM M=Return OK=Enter08-07-2011 09:47:40PM
M=Save and Exit08-07-2011 09:47:40PM
Time Clock Communication Setup
Press [OK] Press [OK] Press [OK]
1
7
9
8
2
3
4
6
5
Swipe Card Area
1. LCD
2. 0-9 Num.Key
3. Status Key
/directiion key
5. Speaker
4. LED
1
2
3
Swipe Card Area
9
8
7
5
4
6
Fingerprint Sensor
9. Delete Key
Operation Guide
Product Appearance
Product Appearance
Product Appearance
Menu
9.Delete Key
其他设置
OtherSetup
Wiring Diagram
Time Setup
Time/Date
DST Setup
Item
Explanation
Set the time and date of the terminal
Enable/Disable daylight Saving Time. Select DST define mode: Week/Date.
Default
In/Out Attendance Setup
Re-Verify Interval
0-250
Log Capacity
Warm (0-5000)
Auto In/Out
Status Switch
Item Explanation
Set a period during which time the system only save the
first successful record and do not save the repeated
records.[0]: Disable the function; Max. value is 250 min.
The terminal will alarm when the memory capacity is less
than the [Log Alert] value.
[0]-Not alarm. Max. value 5,000.
Automaticly switch the attendance status following the shift rule of the user.
0
1000
Clock Options
Default
Volume
Password
Reset to factory
settings
Device ID
Item Explanation
Set the terminal voice volume.
0-[mute], 5-[Max]: 0-5
The password to enter management mode
The system will back to factory mode. It will delete all the data.
Device ID of the terminal which is required in software
communication
12345
5
1
Comm.Setup
Default
ServerMode
Disable
Set the IP address of terminal when communicat with
TCP/IP. IP address must be idle fixed IP address.
Subnet Mask of the LAN
Collect the attendance reocrd in real time from terminal in
realtime, When you use Real-time monitoring function of
the software you need to enable it.
TCP/IP Server mode: Common networkmode
TCP/IP Client mode: Only communicate with the PC
which has server IP
Default Gateway of the LAN
It is the IP address of managing PC when set TCP/IP
communication. The address must be set in ‘Client mode’
192.168.000.218
255.255.255.000
192.168.000.001
192.168.000.007
Comm.
IP Address
Mask
Gateway
Server IP
Item Explanation
Real Time
To Pen Drive Setup
All Records
New Records
Some Users
All Users
Item Explanation
Download all the attendance records and create an Anviz-c folder in the root
path of the U pen driver. The attendacne record file named KQ.
Download the new attendacne records and create an Anviz-c folder in the root
path of the U pen driver. And the new attendance record file named:NKQ.
Download designated users information.
Download all the user information and fingerprints. There are two files store in
the Anviz-c folder.
User information file named: YG, User fingerprint file named: ZW.
Comm.Setup
Manager User
Add User
Modify User
Delete User
Pen Driver
To Pen Driver
Upload to Clock
Clock Setup
Time Setup
Display Setup
Advanced Setup
Other Options
Clock Information
Search Record Attendance
Self Test
FP Precision
In/Out Att. Setup
Clock Options
Power Manage
Access Control
(The function with mark in the menu is for the specific
model unit. Please follow as actual product’s menu. )
Add user information
( Select Manage Userand press [OK] )
Add User：Each user can register 10 fingerprints, one password and one card. It requires place the finger twice to register
one fngerprint.
Select [Enroll FP]
Press [OK]
Select finger to enrollafter enrollment,
press[M] to save and exit
Select [MatchWay]
Press [OK]
User ID 8108
Place Your Finger
0
1
2
3 4
5
6
7
8 9
Enter User information
Setup
PW
Card #
Save/Next
Admin
No
Name
Enroll FP
MatchWay
User ID
8108
Select [Add User]
Modify User Delete UserAdd User
Set Verify methodThen press [M] to exit
Default Method
FP + PW + Card
ID + Password
FP + PW
Fingerprint Only
ID + FP
ID + PW + FP
Card Only
Card + FP
Card + PW
08-07-2011 09:48:15PM M=Return OK=Enter 08-07-2011 09:48:15PM M=Exit 08-07-2011 09:48:15PM M=Save and Exit 08-07-2011 09:48:15PM M=Save and Exit
Main Menu - Add User Enroll New User Enroll FP Default Verification Method
Press [OK]
Setup
Illustration for placing finger
FP Precision Setup
1 : N
1 : 1
AutoUpdate
VerifyMode
All User Verify
Item
80%
90%
YES
DefaultExplanation
The fingerprint to be verified will be matched with all the
fingerprint templates in the database automatically.
The fingerprint to be verified will be matched with the
fingerprint template of the specific user ID.
In the process of verifying fingerprint, the system will
replace the old low quality fingerprint template with the
new high quality fingerprint template.
set default verify methods for terminal.
Set verify methods for all users. Now all the users will be set same verifying
method.
Display Setup
Language
Date Format
FP Image
Time Format
Item Explanation
The Language of the menu
Setup the Date format on the LCD
Whether display fingerprint image when place finger.
Setup the Time format on the LCD
Default
please refer to
the subject product
YYYY-MM-DD
24 Hour
Show
The products are subject to change without notice.
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
EverFocus EBC910R Owner's manual
-
eSSL K31 User manual
-
Amano FPT-40 Fingerprint Owner's manual
-
Safescan TA-8020 User manual
-
Raleigh TQ600 Terminals Owner's manual
-
Acroprint V3 User manual
-
ZKTeco SpeedFace-V5L User manual
-
-
Xvision XD401 Operating instructions
-
Commax IDentry-T65 Owner's manual
