V1.1
2
1
4
5
3
9
10
11
6 7 8
Product Appearance
菜单
其他设置
Menu
Operation Guide
Always place finger in the center of the sensor. Place the finger flat on the sensor.
Illustration for placing finger
Don’t place finger away
from the center of the
sensor window.
Use of the finger tip only.
Don’t place finger
at an angle.
Correct method :
Incorrect method :
OtherSetup
Wiring Diagram
C3 Fingerprint&Card Time Clock Operation Guide
TCP/IP
USB/Power
RJ11
RJ45
2.LCD
5.
0-9 Num.Key
3.
Status Key
/Directiion key
11.
Swipe Card Area
1.LED
9.
Speaker
4.
Function Key
10.
Fingerprint Sensor
8.
Menu/Back Key
6.
Confirm Key
7.
Delete Key
Add User: Each user can register 10 fingerprints, one password and one card. To enroll each fingerprint, you must place the
same finger on thesensor two times consecutively.
Add user information : (Select [Manage User] and press [OK] )
Set Communication parameter:
Select [Comm.Setup]
菜单管理-用户管理
Main Menu - Manage User
Search RecordClock Setup Clock Information
Comm.SetupManage User Pen Drive
M=Return OK=Enter08-07-2011 09:47:40PM
Set communication parameter,
Press[M] to exit and save
Real Time
Comm.
IP Address
Server IP
Mask
Gateway
Disable
TCP/IP Client
192.168.000.218
192.168.000.007
251.155.255.000
192.168.000.001
M=Save and Exit08-07-2011 09:47:40PM
Time Clock Communication Setup
Input administrator password
Menu/Exit
ID＃
0
08-07-2011 09:47:15PM
Password
*****
Input administrator ID
Menu/Exit
ID＃
0
08-07-2011 09:46:30PM
Press [OK] Press [OK] Press [OK]
Enter management menu: Input ID ‘0’ and press[OK], Input default management password ‘12345’ and press[OK] enter
management menu.
Enter Password
Menu/Exit
ID＃
0
08-07-2011 09:47:15PM
Password
*****
Enter ID
Menu/Exit
ID＃
0
08-07-2011 09:46:30PM 08-07-2011 09:46:15PM Press M to Access Menu
FRI
PM
IN
4609
Press [OK]
Press [OK]
M=Return OK=Enter
Select Menu
菜单管理-用户管理
Main Menu - Manage User
08-07-2011 09:47:40PM
Search RecordClock Setup Clock Information
Comm.SetupManage User Pen Drive
Select finger to enroll, after enrollment,
press[M] to save and exit
User ID 8108
Place Your Finger
0
1
2
3 4
5
6
7
8 9
08-07-2011 09:48:15PM M=Save and Exit
Enroll FP
Set Verify method, Then press
[M] to exit
Default Method
FP + PW + Card
ID + Password
FP + PW
Fingerprint Only
ID + FP
ID + PW + FP
Card Only
Card + FP
Card + PW
08-07-2011 09:48:15PM M=Save and Exit
Default Verification Method
Enter User information
Modify User Delete UserAdd User
08-07-2011 09:48:15PM M=Return OK=Enter
Main Menu - Add User
Select [Add User]
Select
[Enroll FP]
Press [OK]
Select
[MatchWay]
Press [OK]
Press [OK]
Time Setup
Time/Date
DST Setup
Item
Explanation
Set the time and date of the terminal
Enable/Disable daylight Saving Time. Select DST define mode: Week/Date.
Display Setup
Language
Date Format
FP Image
Time Format
Item Explanation
The Language of the menu
Setup the Date format on the LCD
Choose to display fingerprint image during verification.
Setup the Time format on the LCD
Default
please refer to the
subject product
YYYY-MM-DD
24 Hour
Show
To Pen Drive Setup
All Records
New Records
Some Users
All Users
Item Explanation
Download all attendance records and will establish an Anviz-c folder in the
root path of the U pen driver. The attendacne record file extension.KQ
Download the new attendance records and will establish an Anviz-c folder
in the root path of the USB flash drive. New attendance record file
extension.NKQ
Download designated users information.
Download all user information and fingerprints. There are two files stored in
the Anviz-c folder.User information file extension.YG, User fingerprint file
extension.ZW.
Comm.Setup
Default
ServerMode
Disable
To enable network communication, configure the
terminal with a static IP address.
Subnet Mask of the LAN
Collect the attendance records from terminal inrealtime
When you use Real-time monitoring function of the
software you need to enable it.
TCP/IP Server mode: Common network mode.TCP/IP
Client mode: Only communicate with the PC which has
server IP
Default Gateway of the LAN
It is the IP address of managing PC when set TCP/IP
communication. The address must be set in ‘Client mode’
.
192.168.000.218
255.255.255.000
192.168.000.001
192.168.000.007
Comm.
IP Address
Mask
Gateway
Server IP
Item Explanation
Real Time
Default
Default
80%
90%
YES
FP Precision Setup
1 : N
1 : 1
AutoUpdate
VerifyMode
All User Verify
Item DefaultExplanation
The fingerprint to be verified will be matched with all the
fingerprint templates in the database automatically.
The fingerprint to be verified will be matched with the
fingerprint template of the specific user ID.
In the process of verifying fingerprint, the system will
replace the old low quality fingerprint template with the
new high quality fingerprint template.
set default verify methods for terminal.
Set verify methods for all users. Now all the users will be configured to
use the same verification method.
Admin Level
Item Explanation
Different groups for admins with different permissions
Admin Level
5
Open Door
Access control
Item
Relay control
Select relay work mode: ‘Open Door’ or ‘Ring Bell’
Lock Delay
0-15Sec
Time range for the door open delay.
Explanation Default
0
Default
1000
Explanation
In/Out Attendance Setup
Re-Verify
Interval (0-250)
Log Capacity
Warning(0-5000)
Auto In/Out
Status Switch
Item
The duration of time in which the terminal will ignore repeated
attempts for authentication.[0]: Disable the function; Max.
value is 250 min.
The terminal will alarm when the memory capacity is less
than the [Log Alert] value.[0]-Not alarm. Max. value 5,000.
Automatically switch the attendance status following the shift rule of the
user.
Explanation Default
12345
5
1
Clock Options
Volume
Password
Reset to factory
settings
Device ID
Item Explanation
Set the terminal voice volume.0-[mute], 5-[Max]: 0-5
The password to enter management mode
This sets the system back to factory default settings. This will erase all
data stored in the device.
Device ID of the terminal which is required in software
communication
Default
Setup
Setup
PW
Card #
Save/Next
Admin
Name
Enroll FP
MatchWay
User ID
8108
08-07-2011 09:48:15PM M=Exit
Enroll New User
NO
The Terminal automatically turns on when plugged into a power
source. Administrator ID and Password to enter the management menu.
Menu List
：
Comm.Setup
Clock Information
Search Record
Attendance
System Log
Manager User
Add User
Modify User
Delete User
Pen Driver
To Pen Driver
Upload to Clock
Clock Setup
Time Setup
Display Setup
Advanced Setup
Other Options
Self Test
FP Precision
In/Out Att. Setup
Clock Options
Admin Level
Power Manage
Access Control
/
