Any
OC180
RFID Card Time Attendance Operation Guide
Operation Guide
Other Setup
Wiring Diagram
Press [OK] about 3 seconds to turn on the terminal, press [M]
key to enter the management menu. Menu list:
System Info
UserCardLog, Serial, FirmVer
Setup
Keypad, LCD, Flash Hardware Test
System
Log Setup
USB Flash
New Log Backup
All Logs Backup
User Reco!
User Backup
User
Enroll
Delete
Admin Setup
Verify Mode
Admin Clear
Log Alert
Re-Verify
Daylight Saving
Net
Auto Off
Language
Time
Dev ID
Workcode Scope
IP Address
Subnet Mask
MAC Address
Gateway IP
Mode
Local Port
Server IP
Server Port
7.Speaker
8.Work Coder Key
6.LED
1.LCD
2.0-9
Num.Key
3.State Key/ Page (Up/Down)
5.Confirm/Power Key
4.Delete/Exit Key
10.Swipe Card Area
9.Menu Key
1
2
3
7
8
9
10
4
5
6
Product Appearance Menu list
Explanation
Any
Factory default
Setting
Card Or Password only
It requires both Card and Password Verification
together
Item
RF+PW
Verify Mode:
Tips:WorkCode indicates the work type,easily distinguishes which
attendance record is related which work type.
MAX 999999
MIN 0
0-999999
WorkCode:
Valid scope for the Workcode
Factory default
Setting
Explanation
Item
Explanation
Item
Net:
192.168.0.218
255.255.255.0
192.168.0.1
192.168.0.7
5010
5010
Factory default
Setting
Mode
IP Address
Subnet Mask
Port
Server IP
Server Port
Gateway IP
MAC Address
TCP/IP Server mode:Common network mode
TCP/IP Client mode:Only communicate
With the PC which has static IP
Server mode
Set terminal IP address when communication
of TCP/IP,IP address must be a static IP address
It’s the software port number when access
control is under TCP/IP communication
The IP add ress of the Sever Machine when
using Client Mode TCP/IP communication
Net work communication port
Default Gateway of the LAN
Unique Physical address of the network moudle.This setting
can not be modified
Subnet Mask of the LAN
USB Flash:
Explanation
Item
Download new T&A records to U pan drive
Download all T&A records to U pan drive
Download employee’s records saved in device to U pen drive
Upload employee’s information saved in U pen drive to terminal
New Rec.Backup
All Rec.Backup
User Backup
User Recovery
Explanation
Item
Auto off,LogAlert,Re-Verify
Auto off
Log Alert
Re-Verify
Set the time duration from the last operation to the dormant
state No-[Not Off],250min-[Max Time]
The terminal will alarm when the memory capacity is less
than the [Log Alert] value.[No]-Not alam,Max.value 5,000
The duration of time in which the terminal will ignore repeated
attempts for authentication.
[No]: Disable the function; Max. value
is 250 min
Language:
Language
Related Language
Item
Factory default
Setting
Contains 11 languages:
ENG(English),FRCH(French),GERM(German),SPAN(Spanish),
PTG(Portuguese),ITA(Italian),BULG(Bulgarian),SLVK(Slovak),
HUNG(Hungarian),SLVN(Slovenian),TURK(Turkish)
Explanation
Enroll Password： Password length: 0-999999
Enroll PWD
PWD ID
******
Esc-C Set-OK
Input Password
Enroll PWD
•
000001-P
Cancel-C Sav-OK
Press[OK] to save
Enroll PWD
PWD ID
******
Confm
******
Input passord again
Enroll
Password
Esc-C Set-OK
Select [Password]
Card
Enroll Card ：
Enroll Card
Swipe Card！
Enroll Card
000001-C
Esc-C Set-OK
Press [OK] to save
Select [Card]
Enroll
Esc-C Set-OK
Password
Card
Swipe the card
Setup System Time：(Recommended:Please synchronize the time after connect with software.
Time THU
2011-01-01 08:08
↑
Set-C Next-OK
Modify the time
Time THU
2011-03-01 08:00
Save?
No-C Yes-OK
Press[OK] to save
Setup
System
Log Setup
Hardware Test
Select[System]
System
Dev ID 1
Time
Language ENG
Select[Time]
Select[Setup]
IN
17
:
38
26
11-03-01 THU
MENU
User
Setup
USB Flash
Enroll User：Each user can register one
RFID Cara and one password.
Input User ID
Enroll
ID
Esc-C Set-OK
User
Enroll
Delete
Verify Mode
Select[Enroll]
(ID number ranger1-999999
000001
IN
17
:
38
11-03-01 THU
26
Select[User]
MENU
User
Setup
USB Flash
Press [OK]
Press [M]
Press [OK]
Press [OK] Press [OK]
Press [OK]
Press [OK]
Press [OK]
Press [OK]
Press [OK]
Admin Setup：
Admin(Administrator) has all the privileges of the machine. Please pay attention to the admin setup.
Admin Setup
000001
No-C Yes-OK
Admin Setup
Esc-C Add-OK
Select[Admin Setup]
User
Admin Setup
Admin Clear
Admin Setup
ID
000000
Input Admin ID
IN
17
:
38
26
11-03-01 THU
MENU
User
Setup
USB Flash
Select[User]
Press [M] Press [OK] Press [OK] Press [OK] Press [OK]
Press[OK] to save
Press [M] Press [OK] Press [OK] Press [OK] Press [C]
TCP/IPRJ11
USB Flash Drive
Flash Memory
PC USB Port
RJ11
RJ45
1
Device ID:
0-99999999
Explanation
Factory default
Setting
Item
Device ID of the unit which is required in software
communication
Tips:Device ID of the unit which is required in software communication
When the ID as "0" please use the last 8 digits of the serial number.
USB/Power
TCP/IP
V1.2
使用容量小于8G的Kingston,
SanDisk 等品质优良的U盘设备。
/
