Tinwoo Tinwoo Smart Watches 2020 Ver. for Women Men, All-Day Activity Fitness Tracker Bluetooth, for iOS, Android Phone, User manual

Brand: Tinwoo

Model: Tinwoo Smart Watches 2020 Ver. for Women Men, All-Day Activity Fitness Tracker Bluetooth, for iOS, Android Phone,

Type: User manual

Thanks for choosing our Product

User Manual

WHAT WILL YOU GET?

Fitness Watch X 1

Magnetic USB charging cable X 1

User Manual X 1

SPECIAL NOTE: To ensure the device is fully

functional, please connect the device using the

App directly instead of using the system

Bluetooth setting. To do it, simply tap on the

top right corner on the App home page to

search for your device, and then tap on the

Bluetooth ID to start connecting.If you have

already used the phone Bluetooth to connect

with the watch, which is not the correct way,

please disconnect the device from the phone

bluetooth system and then try to connect the

device using our APP directly. Besides,please

make sure you have made the right setting to

allow the App to run in the background without

getting killed by the phone system. Once the

App is killed by the system, the connection will

be lost and no notification or weather info will

be pushed to the device.

HOW TO CHANGE THE STRAP

The fitness watch uses a 20mm-wide standard

watch strap that can be taken off easily and

replaced by other 20mm-wide straps which are

available online.

HOW TO TURN ON

Long press the “Multifunction button” for 3s to

turn the device on.

Note:If it is not turned on, it is likely that the

battery is flat, please charge the device first.

PRODUCT OVERVIEW

Home Screen

ABOUT THE DEVICE

How to change the brightness on the device?

HOW TO CHANGE THE BRIGHTNESS

You can change the brightness on the device in

the Setting page. Simply press the touch key to

select the brightness level that suits your need.

Besides, while you are at the home page or

during a workout session, simply press and

hold on the touch screen while the display is on

and the brightness will be temporarily set to the

maximum until the screen is off. This is

especially useful when you are under the

sunlight where you can’t really read the screen

when the brightness level is low.

It comes with 7 Different Clock Faces which can

be changed in the settings. Home screen will

display date, time, week, weather, steps,bat-

tery status, connection status.

On the home screen, swipe left to enter the

menu page swipe right to enter

personal details page1 and swipe right

again to enter personal details page2

Swipe up to enter the shortcut control page

Swipe down to enter notifications review page

Tap on the following icons to enter the

respective details page:steps distance

calories weather , except for the

following clock face, which will take turn to

show the completion rate for steps, distance,

calories.

Menu Page

Tap the icon to enter the different

menus, which includes Sports,

Settings, Timer and Relax

Sports Menu

Settings Menu

Tap this icon to enter the Settings

menu which includes:

Clockface selection

brightness

Tap this icon to enter the Sports

menu which comes with 8

different Workout modes. Swipe

up or down to go through the list

of Sports and tap to start a

workout session.

Note:For sessions less than 5 minutes, the data

will not be saved

For Walking, Running, Hiking and Cycling, you

can initiate the workout session from the AGPS

page on the App, and the track will be

recorded. Please note that the GPS location

accuracy depends on the GPS location service

from your phone, it doesn'trely on the device at

all.

there are 3 ways for changing clockface

Manual selection

Tap on this to enter the selection mode, swipe

up and down to go through the different

clockfaces and tap on

to confirm selection or tap on to exit.

Auto mode

Shake to change

Tap on this to enable the auto mode. The

device will change the clockface automatically

everyday

Tap on this to enable the shake to change mode.

You can change the clockface by quickly shaking

3 times while looking at the clockfaces.

display timeout device info

power off Clockface selection

Note:Default is manual mode, can only choose

1 mode.

Brightness Recommended to use

level 1 or 2.

Note:Increasing the brightness level will result in

significant drop in battery life.

If“Always On” is turned on, the brightness

will be adjusted to the lowest.

If you wish to increase the display timeout

duration, tap on + icon to adjust. There are 3

options available otherthan the default “+0s”,

which is “+3s”, “+5s” and “Always On”

Note:Increasing the display timeout duration

will result in significant drop in battery life.

If “Always On” is turned on, the brightness will

be adjusted to the owest.

If “Always On” is turned on, the device will

enter “locked” state after 10seconds of idleness

and a icon will be displayed on screen. To

unlock, press the physical button on the device

Device Info

Tap on this icon to check the device info

and tap on the back icon on the top left

corner to return

Relaxation Menu

Timer Menu

Tap this icon to enter the Relax

mode, follow the instruction on the

screen for a guided breathing session

and tap on the back icon on the top

left corner to return

Tap this icon to enter the Timer

menu which includes:

Stopwatch and Timer

Power Off

Tap on this icon to enter the power off

confirmation page, tap on to confirm

power off, or tap on to return

Personal Details Page1

Personal Details Page2

This page shows an overview

of the current day activities,

tap on the respective icons to

check the details

This page includes the following:

Heart rate page Enter this page to start

measuring heart rate manually and to check the

last2 readings

Note:please make sure the Heart Rate Sensor

is clean and has good contact with the skin;

and try to stay still during the measurement for

better accuracy.

The reading is just for reference and not

intended for medical use.

Note:please note that the results will be

affected by too many factors and there are

chances that the sleep might not be recorded if

the“fall asleep criteria” (which is a set of

complicated conditions depending on the

amount of movement, wrist position and angle,

andthis will also change over time) is not

fulfilled. The device will record the sleeping

data from 8pm until next day 12pm only.

Typicallythe device will record sleeping after

you lie down and stop moving for 30min (if you

move quite a lot while sleeping and the “fall

asleep” criteria is not fulfilled before 5am, then

you won’t get the sleep data for that night),

and stop recording only when excessive

movements are detected as wake up.

So, there will be no sleeping data if we check

on the device or APP right after we wake up. It

is only when there are enough movements to

fulfill the “wake up” criteria that the sleeping

data will be available on device, and subse-

quentlysynchronized to APP. A "wake up"

criteria is fulfilled normally after you brush your

teeth or walk for more than 150steps after 8am

Sleeping Details Page Enter this page to

check the previous night sleeping data.

10.

(and need more steps if it is before 7am). If

you wake up at 6am for toilet and then go to

bed again, this won't trigger a "wake up" but

just show as "awake" or "light sleep" in the

sleep analysis. Once a “wake up” is detected,

even if you go back to bed subsequently, it will

not be recorded anymore. There's no need to

reset the sleeping time of the device, it is

showing the sleepingtime on the previous night

and will be automatically reset to zero at 12am

midnight. Sleeping data cannot be estimated

very accurately just by monitoring heart rate

and movement as some actions also have very

similar characteristics as sleeping. For example,

if sitting still on bed and reading for 2 hours

before sleeping, those 2 hours are likely to be

deemed as sleeping. Similarly, if watching TV

on bed for 2 hours after waking up in the

morning, those 2 hours are likely to be deemed

as sleeping too.

11.

Shortcut Control Page

There are 4 icons in this page,

which are:

ECO mode Tap on this to enable the

ECO mode, once enabled, the brightness will

be set to the lowest

Do not disturb DND(DO NOT DISTURB) mode

Tap on this to enable the DND mode, once

enabled, the notifications will be blocked

Music Contol Tap on this to launch the

music control page

Note:Do check if this has been enabled If you

don’t receive any notification.

Note:ECO mode cannot be enabled if the

display is set to “always on”.

ECO mode will be automatically disabled if the

brightness is changed in the brightness setting.

12.

Notifications

Finding Phone Tap on this to find your

phone. Once enabled,your phone will start

ringing and vibrating. Tapagain to stop it.

Note:This feature will work only when the device

is connected to your phone and within the

Bluetooth range.

Swipe down from the home

page or during a Workout

session to read the last 5

push-notifications received

from your phone, swipe right

to the last page to delete all.

Do note that for each of the

notification received,only the first page of the

contents will be displayed

Weather Details Page

Tap on the weather icon on any

of the home screens to enter

Weather Details Page. Swipe

down from this page to check

the weather forecast for the

coming 15days.

Note:Please connect the device to the App first

and make sure the music App is running for this

feature to work correctly. Do note that this

might not work for some of the Music Apps with

different control protocols.

13.

Other Alerts or Reminders

Note:Please keep the device connected to the

App and ensure that the App is allowed to run

at the background so that the weather info can

be updated. Do note that the weather info is

only updated once every hour and it is based

on the nearest station which might be up to

30miles away from your exact location. So,

there might be some slight different from the

real-time weather that you might have acquired

from other weather sources.

Note:These features require the corresponding

settings on the App, please make the changes

on the App while the device is connected.For

incoming call alert feature, it works only when

the device is connected to the App.

Unusual Heart Rate Alert is only applicable

during workout session.

If notifications suddenly do not work, please

check if the DND mode has been disabled.

Please check also the setting under Settings->

Device -> Message Alert & Notification Filter. If

it still doesn’t work, go to Settings->Applica-

tion->Notification Access Authorization, then

turn off the notification access for CT FIT and

then turn it on again.

14.

MOBILE APP

There are different alerts or reminders as below:

Incoming Call Alert you can tap on the

“hang up” icon to reject the call

Sedentary Reminder Alarm Alert

Schedule Reminder Goal Achievement

Notification Unusual Heart Rate Alert

Selfie mode and more...

DOWNLOAD THE APP

Download the TINWOO app from App store for

iPhones and from Google Play Store for

Android phones.

15.

Home Page:This page will display the current

status and come with the icons to enter into

the other main pages

Note:To allow the App to function correctly,

please grant the permissions for all the access

which your system will prompt you during the

installation. Failing which, some of the features

might not work properly

TINWOO

16.

Please refer to the FAQ on the mobile App

(Settings -> FAQ)

FAQ:

Connecting Device: On the home page, tapping

on the icon at the top right corner to enter the

device searching page. Within 30 seconds, you

should see a list of devices available for

connection. Tap on the device ID to initiate the

connection which normally takes not more than

30 seconds. If the connection process takes

longer than 30 seconds, you can tap on the

screen to stop it and then tap on your device ID

to start connecting again.

Photo-shooting mode Once device connected,

tap on the icon at the top right corner to enter

the device management page, and then tap on

the “Take Photo” to enter Photo-shooting mode

and your connected device will also enter

selfie-control mode automatically, Then, you

can use your device as the remote selfie-con-

trol,simply shake your device to take a shot.

REMARK:This product is an electronic monitor-

ing product and is not intended as a medical

reference. We reserve the right tomodify or

improve any of the functions described in this

manual without any prior notice. At the same

time, we hold the right to continuously update

the product content. Please refer to the actual

product

17.

Tinwoo Tinwoo Smart Watches 2020 Ver. for Women Men, All-Day Activity Fitness Tracker Bluetooth, for iOS, Android Phone, User manual

Brand: Tinwoo

Model: Tinwoo Smart Watches 2020 Ver. for Women Men, All-Day Activity Fitness Tracker Bluetooth, for iOS, Android Phone,

Type: User manual

Download PDF

report

Tinwoo Tinwoo Smart Watches 2020 Ver. for Women Men, All-Day Activity Fitness Tracker Bluetooth, for iOS, Android Phone, User manual

Tinwoo Tinwoo Smart Watches 2020 Ver. for Women Men, All-Day Activity Fitness Tracker Bluetooth, for iOS, Android Phone, User manual

Related papers

Other documents