Item No. 204419
TABLET FLOOR STAND WITH WHEELS
Owner’s Guide
FEATURES:
USING YOUR TABLET FLOOR STAND:
ASSEMBLY:
Thank you for purchasing the Sharper Image Tablet Floor Stand with Wheels.
Please take a moment to review these instructions and retain them for future reference.
• Floor stand allows hands-free viewing of your
tablet at any height, any angle.
• Easy to assemble.
• Easy to adjust tablet height.
• Easy to rotate tablet a full 360-degrees.
• Smooth-rolling wheels make it easy to move the
tablet stand anywhere, or to slide it into a corner
or a closet when not in use.
• You can easily adjust your tablet for horizontal or
vertical viewing—or to any other angle.
• You can easily adjust the height and angle of the
bracket stand by loosening the collar clamp, then
tightening again after adjustment is complete.
(figures 9 & 10).
CAUTION: Hold the pole firmly while making bracket
stand adjustments (Figure 10). Always remember
to retighten collar after making any adjustments.
1. Assemble the base (three pieces, figure 1).
2. Insert casters into each of the four feet (figure 2).
3. Insert bracket stand into base (figure 3).
Attach your tablet to bracket:
4. Insert long side of tablet into one side of the bracket
(figure 4).
5. Pull open the other side of the bracket, then release the
bracket to grip the tablet (figure 5).
CAUTION: Make sure that bracket is holding the tablet
securely in place.
Attach the tablet/bracket assembly to the bracket stand:
6. Fit circular connector at back of tablet/bracket
assembly to bracket stand (figure 6).
Your tablet floor stand is now assembled
and ready for use.
The SHARPER IMAGE® name and logo are registered trademarks. ©Sharper Image. All Rights Reserved.
CUSTOMER SERVICE
Sharper Image branded items purchased from SharperImage.com
include a 1-year limited replacement warranty. If you require any
assistance with your Sharper Image Tablet Holder with Speakers,
please call 1 (877) 210-3449.
How to use
Stand assemblyBase assembly Insert casters
Caution:Please ensure that tablet is securely fixed in.
Place tablet on one
side of bracket
Pull open the bracket over
the tablet and release
Rotates 360˚Attach to the panel
Caution:
Please hold the pole when make adjustment
Horizontal / vertical view
with angle adjustments
Loose Adjust height
Tighten
360˚
1
How to use
Stand assemblyBase assembly Insert casters
Caution:Please ensure that tablet is securely fixed in.
Place tablet on one
side of bracket
Pull open the bracket over
the tablet and release
Rotates 360˚Attach to the panel
Caution:
Please hold the pole when make adjustment
Horizontal / vertical view
with angle adjustments
Loose Adjust height
Tighten
360˚
1 2 3 4 5
6
How to use
Stand assemblyBase assembly Insert casters
Caution:Please ensure that tablet is securely fixed in.
Place tablet on one
side of bracket
Pull open the bracket over
the tablet and release
Rotates 360˚Attach to the panel
Caution:
Please hold the pole when make adjustment
Horizontal / vertical view
with angle adjustments
Loose Adjust height
Tighten
360˚
1 2 3 4 5
6
7
How to use
Stand assemblyBase assembly Insert casters
Caution:Please ensure that tablet is securely fixed in.
Place tablet on one
side of bracket
Pull open the bracket over
the tablet and release
Rotates 360˚Attach to the panel
Caution:
Please hold the pole when make adjustment
Horizontal / vertical view
with angle adjustments
Loose Adjust height
Tighten
360˚
1 2 3 4 5
6 7 9
10
8
How to use
Stand assemblyBase assembly Insert casters
Caution:Please ensure that tablet is securely fixed in.
Place tablet on one
side of bracket
Pull open the bracket over
the tablet and release
Rotates 360˚Attach to the panel
Caution:
Please hold the pole when make adjustment
Horizontal / vertical view
with angle adjustments
Loose Adjust height
Tighten
360˚
1 2 3 4 5
6 7
9
How to use
Stand assemblyBase assembly Insert casters
Caution:Please ensure that tablet is securely fixed in.
Place tablet on one
side of bracket
Pull open the bracket over
the tablet and release
Rotates 360˚Attach to the panel
Caution:Please hold the pole when make adjustment
Horizontal / vertical view
with angle adjustments
Loose Adjust height
Tighten
360˚
10
How to use
Stand assemblyBase assembly Insert casters
Caution:Please ensure that tablet is securely fixed in.
Place tablet on one
side of bracket
Pull open the bracket over
the tablet and release
Rotates 360˚Attach to the panel
Caution:
Please hold the pole when make adjustment
Horizontal / vertical view
with angle adjustments
Loose Adjust height
Tighten
360˚
1
2
How to use
Stand assemblyBase assembly Insert casters
Caution:Please ensure that tablet is securely fixed in.
Place tablet on one
side of bracket
Pull open the bracket over
the tablet and release
Rotates 360˚Attach to the panel
Caution:
Please hold the pole when make adjustment
Horizontal / vertical view
with angle adjustments
Loose Adjust height
Tighten
360˚
1 2
3
How to use
Stand assemblyBase assembly Insert casters
Caution:Please ensure that tablet is securely fixed in.
Place tablet on one
side of bracket
Pull open the bracket over
the tablet and release
Rotates 360˚Attach to the panel
Caution:
Please hold the pole when make adjustment
Horizontal / vertical view
with angle adjustments
Loose Adjust height
Tighten
360˚
1 2 3
4
How to use
Stand assemblyBase assembly Insert casters
Caution:Please ensure that tablet is securely fixed in.
Place tablet on one
side of bracket
Pull open the bracket over
the tablet and release
Rotates 360˚Attach to the panel
Caution:
Please hold the pole when make adjustment
Horizontal / vertical view
with angle adjustments
Loose Adjust height
Tighten
360˚
1 2 3 4
5
CAUTION: Hold the pole firmly while
making bracket stand adjustments.
Always remember to retighten collar
after making any adjustments.
Figure 1: Assemble base
Figure 4: Place long
side of tablet into one
side of bracket.
Figure 7: Tablet is
easily adjusted to any
viewing angle.
Figure 2: Insert casters.
Figure 5: Extend the
other side of the bracket
to firmly grip tablet.
Figure 8: Rotates full
360 degrees.
Figure 3: Insert stand
into base.
Figure 6: Attach tablet/
bracket assembly to
bracket stand.
Figure 9: 1. Loosen
collar to adjust height
and bracket arm. 2.
Retighten collar.
Floor Stand with Wheels,