Micro Motion Retrofit a 5700 Owner's manual

Type
Owner's manual

Micro Motion Retrofit a 5700 allows users to upgrade a 5700 transmitter with configurable inputs and outputs with a Wi-Fi display. This upgrade offers several benefits and use cases:

  • Wireless connectivity: The Wi-Fi display eliminates the need for wired connections, providing greater flexibility and ease of access to transmitter data.
  • Remote monitoring: Users can remotely monitor and configure the transmitter using a smartphone, tablet, or laptop with a Wi-Fi connection. This enables real-time data access and adjustments from anywhere within range.
  • Improved efficiency: The Wi-Fi display streamlines maintenance and troubleshooting by allowing users to quickly access diagnostic information and make necessary changes without physically being present at the transmitter location.

Micro Motion Retrofit a 5700 allows users to upgrade a 5700 transmitter with configurable inputs and outputs with a Wi-Fi display. This upgrade offers several benefits and use cases:

  • Wireless connectivity: The Wi-Fi display eliminates the need for wired connections, providing greater flexibility and ease of access to transmitter data.
  • Remote monitoring: Users can remotely monitor and configure the transmitter using a smartphone, tablet, or laptop with a Wi-Fi connection. This enables real-time data access and adjustments from anywhere within range.
  • Improved efficiency: The Wi-Fi display streamlines maintenance and troubleshooting by allowing users to quickly access diagnostic information and make necessary changes without physically being present at the transmitter location.
Replacement Instruction
MMI-20079655, Rev AA
November 2020
Retrofit a Micro Motion 5700 Configurable
Inputs and Outputs Display with a Wi-Fi
Display
Replacement Instruction
November 2020 MMI-20079655
2 5700 with Wi-Fi Transmitter
Required tools and prerequisite instructions
Use these steps to retrofit an existing display for a 5700 transmitter with configurable inputs and outputs with a Wi-Fi display. Wi-Fi
is compatible with only 5700 models with configurable inputs and outputs with firmware version 4.0 or later. Upgrade the firmware
before retrofitting the display. For more information about upgrading firmware, see the Micro Motion 5700 Transmitters with
Configurable Inputs and Outputs: Configuration and Use Manual.
Important
The Wi-Fi module adds additional heat dissipation inside the 5700 housing that reduces the tagged temperature code from T5 to
T4 on all Zone2/Div2 installations. To retag this device for Zone2/Div2 installations, consult the factory.
Replacement Instruction Required tools and prerequisite instructions
MMI-20079655 November 2020
www.emerson.com 3
1.
Steps Replacement Instruction
November 2020 MMI-20079655
4 5700 with Wi-Fi Transmitter
2.
Replacement Instruction Steps
MMI-20079655 November 2020
www.emerson.com 5
3.
Steps Replacement Instruction
November 2020 MMI-20079655
6 5700 with Wi-Fi Transmitter
4.
Replacement Instruction Steps
MMI-20079655 November 2020
www.emerson.com 7
5.
Steps Replacement Instruction
November 2020 MMI-20079655
8 5700 with Wi-Fi Transmitter
6.
Replacement Instruction Steps
MMI-20079655 November 2020
www.emerson.com 9
7.
Steps Replacement Instruction
November 2020 MMI-20079655
10 5700 with Wi-Fi Transmitter
8.
Replacement Instruction Steps
MMI-20079655 November 2020
www.emerson.com 11
* MMI-20079655*
MMI-20079655
Rev. AA
November 2020
Emerson Automation Solutions
7070 Winchester Circle
Boulder, Colorado USA 80301
T: +1 800-522-6277
T: +1 303-527-5200
F: +1 303-530-8459
Mexico: +52 55 5809 5300
Argentina: +54 11 4809 2700
Brazil: +55 15 3413 8000
Chile: +56 2 2928 4800
Peru: +51 15190130
Emerson Automation Solutions
Central Europe: +41 41 7686 111
Eastern Europe: +41 41 7686 111
Dubai: +971 4 811 8100
Abu Dhabi: +971 2 697 2000
Austria: +43 2236 607-0
France: +33 (0) 800 917 901
Germany: +49 (0) 2173 3348 0
Italy: +39 8008 77334
The Netherlands: +31 (0) 70 413 6666
Belgium: +32 2 716 77 11
Spain: 900 901 983
U.K. and Ireland: 0870 240 1978
Russian/CIS: +7 495 995 9559
Emerson Automation Solutions
Australia: (61) 3 9721 0200
China: (86) 21 2892 9000
India: (91) 22 6662 0566
Japan: +81-3-5769-6800
South Korea: (82) 31 8034 0000
Singapore: (65) 6 363 7766
©
2020 Micro Motion, Inc. All rights reserved.
The Emerson logo is a trademark and service mark of Emerson Electric Co. Micro Motion, ELITE,
ProLink, MVD and MVD Direct Connect marks are marks of one of the Emerson Automation
Solutions family of companies. All other marks are property of their respective owners.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

Micro Motion Retrofit a 5700 Owner's manual

Type
Owner's manual

Micro Motion Retrofit a 5700 allows users to upgrade a 5700 transmitter with configurable inputs and outputs with a Wi-Fi display. This upgrade offers several benefits and use cases:

  • Wireless connectivity: The Wi-Fi display eliminates the need for wired connections, providing greater flexibility and ease of access to transmitter data.
  • Remote monitoring: Users can remotely monitor and configure the transmitter using a smartphone, tablet, or laptop with a Wi-Fi connection. This enables real-time data access and adjustments from anywhere within range.
  • Improved efficiency: The Wi-Fi display streamlines maintenance and troubleshooting by allowing users to quickly access diagnostic information and make necessary changes without physically being present at the transmitter location.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI